1. Structural and reduced form
     Assumptions  

2. Estimation
     Two-stages least squares (2SLS)    Indirect least squares    Limited information maximum likelihood (LIML)    K class estimators    Three-stage least squares (3SLS)  

3. Using cross-equation restrictions to achieve identification

4. Applications in social science

5. See also

6. Notes

7. References

8. External links

Structural and reduced form

Suppose there are m regression equations of the form

where i is the equation number, and {{nowrap|t {{=}} 1, ..., T}} is the observation index. In these equations x_it is the k_i×1 vector of exogenous variables, y_it is the dependent variable, y_−i,t is the n_i×1 vector of all other endogenous variables which enter the i^th equation on the right-hand side, and u_it are the error terms. The “−i” notation indicates that the vector y_−i,t may contain any of the y’s except for y_it (since it is already present on the left-hand side). The regression coefficients β_i and γ_i are of dimensions k_i×1 and n_i×1 correspondingly. Vertically stacking the T observations corresponding to the i^th equation, we can write each equation in vector form as

where y_i and u_i are T×1 vectors, X_i is a T×k_i matrix of exogenous regressors, and Y_−i is a T×n_i matrix of endogenous regressors on the right-hand side of the i^th equation. Finally, we can move all endogenous variables to the left-hand side and write the m equations jointly in vector form as

This representation is known as the structural form. In this equation {{nowrap|Y {{=}} [y₁ y₂ ... y_m]}} is the T×m matrix of dependent variables. Each of the matrices Y_−i is in fact an n_i-columned submatrix of this Y. The m×m matrix Γ, which describes the relation between the dependent variables, has a complicated structure. It has ones on the diagonal, and all other elements of each column i are either the components of the vector −γ_i or zeros, depending on which columns of Y were included in the matrix Y_−i. The T×k matrix X contains all exogenous regressors from all equations, but without repetitions (that is, matrix X should be of full rank). Thus, each X_i is a k_i-columned submatrix of X. Matrix Β has size k×m, and each of its columns consists of the components of vectors β_i and zeros, depending on which of the regressors from X were included or excluded from X_i. Finally, {{nowrap|U {{=}} [u₁ u₂ ... u_m]}} is a T×m matrix of the error terms.

Postmultiplying the structural equation by {{nowrap|Γ⁻¹}}, the system can be written in the reduced form as

This is already a simple general linear model, and it can be estimated for example by ordinary least squares. Unfortunately, the task of decomposing the estimated matrix into the individual factors Β and {{nowrap|Γ⁻¹}} is quite complicated, and therefore the reduced form is more suitable for prediction but not inference.

Assumptions

Firstly, the rank of the matrix X of exogenous regressors must be equal to k, both in finite samples and in the limit as {{nowrap|T → ∞}} (this later requirement means that in the limit the expression should converge to a nondegenerate k×k matrix). Matrix Γ is also assumed to be non-degenerate.

Secondly, error terms are assumed to be serially independent and identically distributed. That is, if the t^th row of matrix U is denoted by u_(t), then the sequence of vectors {u_(t)} should be iid, with zero mean and some covariance matrix Σ (which is unknown). In particular, this implies that {{nowrap|E[U] {{=}} 0}}, and {{nowrap|E[U′U] {{=}} T Σ}}.

Lastly, the identification conditions require that the number of unknowns in this system of equations should not exceed the number of equations. More specifically, the order condition requires that for each equation {{nowrap|k_i + n_i ≤ k}}, which can be phrased as “the number of excluded exogenous variables is greater or equal to the number of included endogenous variables”. The rank condition of identifiability is that {{nowrap|rank(Π_i0) {{=}} n_i}}, where Π_i0 is a {{nowrap|(k − k_i)×n_i}} matrix which is obtained from Π by crossing out those columns which correspond to the excluded endogenous variables, and those rows which correspond to the included exogenous variables.

Estimation

Two-stages least squares (2SLS)

The simplest and the most common^[2] estimation method for the simultaneous equations model is the so-called two-stage least squares method, developed independently by {{harvtxt|Theil|1953}} and {{harvtxt|Basmann|1957}}. It is an equation-by-equation technique, where the endogenous regressors on the right-hand side of each equation are being instrumented with the regressors X from all other equations. The method is called “two-stage” because it conducts estimation in two steps:^[3]

Step 1: Regress Y_−i on X and obtain the predicted values ;

Step 2: Estimate γ_i, β_i by the ordinary least squares regression of y_i on and X_i.

If the i^th equation in the model is written as

where Z_i is a T×(n_i + k_i) matrix of both endogenous and exogenous regressors in the i^th equation, and δ_i is an (n_i + k_i)-dimensional vector of regression coefficients, then the 2SLS estimator of δ_i will be given by^[3]

where {{nowrap|P {{=}} X (X ′X)⁻¹X ′}} is the projection matrix onto the linear space spanned by the exogenous regressors X.

Indirect least squares

Indirect least squares is an approach in econometrics where the coefficients in a simultaneous equations model are estimated from the reduced form model using ordinary least squares.^[4][5] For this, the structural system of equations is transformed into the reduced form first. Once the coefficients are estimated the model is put back into the structural form.

Limited information maximum likelihood (LIML)

The “limited information” maximum likelihood method was suggested by {{harvtxt|Anderson|Rubin|1949}}. It is used when one is interested in estimating a single structural equation at a time (hence its name of limited information), say for observation i:

The structural equations for the remaining endogenous variables Y_−i are not specified, and they are given in their reduced form:

Notation in this context is different than for the simple IV case. One has:

• : The endogenous variable(s).
• : The exogenous variable(s)
• : The instrument(s) (often denoted )

The explicit formula for the LIML is:^[6]

where {{nowrap|M {{=}} I − X (X ′X)⁻¹X ′}}, and λ is the smallest characteristic root of the matrix:

where, in a similar way, {{nowrap|M_i {{=}} I − X_i (X_i′X_i)⁻¹X_i′}}.

In other words, λ is the smallest solution of the generalized eigenvalue problem, see {{harvtxt|Theil|1971|loc=p. 503}}:

K class estimators

The LIML is a special case of the K-class estimators:^[7]

with:

Several estimators belong to this class:

• κ=0: OLS
• κ=1: 2SLS. Note indeed that in this case, the usual projection matrix of the 2SLS
• κ=λ: LIML
• κ=λ - α (n-K): {{harvtxt|Fuller|1977}} estimator. Here K represents the number of instruments, n the sample size, and α a positive constant to specify. A value of α=1 will yield an estimator that is approximately unbiased.^[8]

Three-stage least squares (3SLS)

The three-stage least squares estimator was introduced by {{harvtxt|Zellner|Theil|1962}}.^[9] It can be seen as a special case of multi-equation GMM where the set of instrumental variables is common to all equations.^[10] If all regressors are in fact predetermined, then 3SLS reduces to seemingly unrelated regressions (SUR). Thus it may also be seen as a combination of two-stage least squares (2SLS) with SUR.

Using cross-equation restrictions to achieve identification

In simultaneous equations models, the most common method to achieve identification is by imposing within-equation parameter restrictions.^[11] Yet, identification is also possible using cross equation restrictions.

To illustrate how cross equation restrictions can be used for identification, consider the following example from Wooldridge ^[11]

where z's are uncorrelated with u's and y's are endogenous variables. Without further restrictions, the first equation is not identified because there is no excluded exogenous variable. The second equation is just identified if δ₁₃≠0, which is assumed to be true for the rest of discussion.

Now we impose the cross equation restriction of δ₁₂=δ₂₂. Since the second equation is identified, we can treat δ₁₂ as known for the purpose of identification. Then, the first equation becomes:

Then, we can use (z₁,z₂,z₃) as instruments to estimate the coefficients in the above equation since there are one endogenous variable (y₂) and one excluded exogenous variable (z₂) on the right hand side. Therefore, cross equation restrictions in place of within-equation restrictions can achieve identification.

Applications in social science

Across fields and disciplines simultaneous equation models are applied to various observational phenomena. These equations are applied when phenomena are assumed to be reciprocally causal. The classic example is supply and demand in economics. In other disciplines there are examples such as candidate evaluations and party identification^[12] or public opinion and social policy in political science;^[13][14] road investment and travel demand in geography;^[15] and educational attainment and parenthood entry in sociology or demography.^[16] The simultaneous equation model requires a theory of reciprocal causality that includes special features if the causal effects are to be estimated as simultaneous feedback as opposed to one-sided 'blocks' of an equation where a researcher is interested in the causal effect of X on Y while holding the causal effect of Y on X constant, or when the researcher knows the exact amount of time it takes for each causal effect to take place, i.e., the length of the causal lags. Instead of lagged effects, simultaneous feedback means estimating the simultaneous and perpetual impact of X and Y on each other. This requires a theory that causal effects are simultaneous in time, or so complex that they appear to behave simultaneously; a common example are the moods of roommates.^[17] To estimate simultaneous feedback models a theory of equilibrium is also necessary – that X and Y are in relatively steady states or are part of a system (society, market, classroom) that is in a relatively stable state.^[18]

See also

• General linear model
• Seemingly unrelated regressions
• Reduced form
• Parameter identification problem

Notes

References

• {{cite book

• {{cite journal

• {{cite journal

• {{cite book

• {{cite journal

• {{cite book

• {{cite book |last=Maddala |first=G. S. |authorlink=G. S. Maddala |title=Introduction to Econometrics |chapter=Simultaneous Equations Models |pages=343–390 |location=New York |publisher=Wiley |year=2001 |edition=Third |isbn=978-0-471-49728-8 }}
• {{cite book

• {{cite book |first=Denis |last=Sargan |authorlink=Denis Sargan |title=Lectures on Advanced Econometric Theory |location=Oxford |publisher=Basil Blackwell |year=1988 |isbn=978-0-631-14956-9 |pages=68–89 }}
• {{cite journal

External links

• About.com:economics Online dictionary of economics, entry for ILS
• {{YouTube|id=D5lt9bhOshc&list=PLD15D38DC7AA3B737&index=15|title=Lecture on the Identification Problem in 2SLS, and Estimation}} by Mark Thoma

• 1999 Sultan Azlan Shah Cup
• 1999 Summer of Scandal
• 1999 Sun Orchard salmonellosis outbreak
• 1999 Supercupa Romaniei
• 1999 Supersport World Championship
• 1999 Supertaca Candido de Oliveira
• 1999 Supertaça Cândido de Oliveira
• 1999 Suwon Samsung Bluewings season
• 1999 Swale Borough Council election
• 1999 Swedish Football Division 3
• 1999 Swedish football Division 3
• 1999 Swedish Touring Car Championship
• 1999 Swisscom Challenge
• 1999 Swisscom Challenge - Doubles
• 1999 Swisscom Challenge - Singles
• 1999 Swisscom Challenge - Singles Qualifying
• 1999 Swisscom Challenge – Doubles
• 1999 Swisscom Challenge – Doubles Qualifying
• 1999 Swisscom Challenge – Singles
• 1999 Swisscom Challenge – Singles Qualifying
• 1999 Swiss referendums
• 1999 Sybase Open
• 1999 Sybase Open – Doubles
• 1999 Sybase Open – Singles
• 1999 Sydney International - Women's Doubles Qualifying