“Metal oxide adhesion”的意思、由来-开放百科全书

The strength of metal oxide adhesion effectively determines the wetting of the metal-oxide interface. The strength of this adhesion is important, for instance, in production of light bulbs and fiber-matrix composites that depend on the optimization of wetting to create metal-ceramic interfaces.^[1] The strength of adhesion also determines the extent of dispersion on catalytically active metal.^[1]

Metal oxide adhesion is important for applications such as complementary metal oxide semiconductor devices. These devices make possible the high packing densities of modern integrated circuits.

Oxide thermodynamics

Metal oxides are formed consistent with minimizing surface energy and minimizing system entropy. The formation reactions are chemical in nature, forming bonds between oxygen dimers and pure metals or metal alloys. The reactions are endothermic for transition metals and semi-metals. At isothermic and isobaric conditions at atmosphere, the probability for a free metal surface to bind an oxygen dimer via oxidation is a function of the partial pressure of oxygen, the surface energy between the crystal and the liquid or vapor phase (see heat of formation), and time.

In standard conditions, the determining factors for phase change are temperature and pressure. The idea here is that oxygen is making a phase change from gas to solid, and at the same time a bond is forming between oxygen and a metal. The instantaneous breaking of one bond and forming a different one required an energy contribution higher than the enthalpy of bond dissociation for molecular gaseous oxygen at 298K is +498.34 kJ/mol and is typically expressed as ∆Hf since it is also the heat of formation.

The majority of contributed entropy in the formation of metal-oxides is from O₂(g). Gaseous oxygen molecules have high translation entropy, due to the excited vapor phase. This allows the transport of oxygen from the system to the interface or reaction surface. The change in entropy (ΔS) for oxidation is negative (exothermic) for semi-metals, transition metals, alkali earth metals and lanthanides/actinides. This fact is due to the elevated surface energy of an exposed pure metal and the ability of the tiny oxygen dimer to attract to high energy sites. The trend for oxide formation is that the reaction rate increases as atomic number increases.

Areas with elevated surface electron density will always oxidize prefentially, as is demonstrated beautifully in the formation of electro-anodized titanate. The formation of oxides is dominated by interactions between the Gibbs free energy surfaces of constituents. The intersections of Gibbs surfaces at a given temperature and pressure would be represented in 2D space as phase diagrams. In real world applications, Gibbs surfaces are subject to the additional dimension entropy. This third dimension constitutes a Cartesian coordinate space and the surface mapped out by the Gibbs energy for a given reaction gives a threshold energy needed for a phase transition. These values can be found in ASM library volumes, or online as the "standard heats of formation."

standard state change of enthalpy is independent and thus the gradient of the change in Gibbs free energy as a function of temperature is linear. This dictates that an oxide becomes less thermodynamically stable with increasing temperature.

An important distinction between equilibrium wetting and non-equilibrium wetting is that the non-equilibrium condition occurs when a chemical reaction is taking place. This non-equilibrium wetting is an irreversible thermodynamic process that accounts for the changes of the chemical potential when forming a new boundary phase, such as an oxide.

Work of adhesion

The ideal work of separation W_sep is the reversible work needed to separate the interface into two free surfaces.^[3] Important as a state function depending on the mechanical properties.^[2] It is referred to as ideal because when the two free surfaces create an interface, the concentration of the interface will only be identical to the bulk at the instant the surface is created. In order to reach chemical equilibrium, the process of diffusion will take place which will increase any measurement of the work of separation.^[2] The work of adhesion is the reversible free energy change for making free surfaces from interfaces.^[2] It is represented by the equation:

The following table gives some common metals and their corresponding surface energies. All the metals are face-centered cubic crystal structure and these surface energies correspond to the (100) surface plane.

Oxide stability

Ellingham diagrams are generated according to the second law of thermodynamics and are a graphical representation of the change in the Gibbs free energy with respect to changing temperature for the formation of oxides.

Solid-gas interface

Structure

Real surfaces may be macroscopically homogeneous, but their microscopic heterogeneity plays a crucial role in the relationship between the metal and its oxide.

Transition metal oxides

Roughness

Increasing surface roughness increases the number of dangling bonds at the metal-oxide interface. The surface free energy of a crystal face is:

The binding energy favors a smoother surface that minimizes the number of dangling bonds, while the surface entropy term favors a rougher surface with increasing dangling bonds as the temperature is increased.^[4]

Heterogeneity

Crystallographic orientation

A material's charge remains neutral when a surface is created by the law of charge conservation, but individual Bravais lattice planes, defined by their Miller indices, may be non-polar or polar based on their symmetry. A dipole moment increases the surface Gibbs free energy, but the greater polarizability of oxygen ions as compared to metals allows polarization to decrease the surface energy and thus increase the ability of metals to form oxides. Consequently, different exposed metal faces may adhere weakly to non-polar oxide faces, but be able to perfectly wet a polar face.

Defects

Surface defects are the localized fluctuations of surface electronic states and binding energies. Surface reactions, adsorption, and nucleation can be drastically affected by the presence of these defects.^[5]

Vacancies

Oxide growth is dependent upon the flux (diffusion) of either coupled or independent anions and cations through the oxide layer.^[6]^[7] Stoichiometric oxides have an integer ratio of atoms can only support coupled diffusion of anions and cations through the lattice migration of Schottky defects (paired anion/cation vacancies) or Frenkel defects (complete anion lattice with cation vacancies and interstitials).^[6]^[7] Non-stoichiometric oxide films support independent ion diffusion and are either n-type (extra electrons) or p-type (extra electron holes). Although there are only two valence states, there are three types:^[6]^[7]

Non-stoichiometric oxides most commonly have excess metal cations as a result of insufficient oxygen during the creation of the oxide layer. Excess metal atoms with a smaller radius than O²⁻ anions are ionized within the crystal lattice as interstitial defects and their lost electrons remain free within the crystal, not taken by the oxygen atoms. The presence of mobile electrons within the crystal lattice significantly contributes to the conduction of electricity and the mobility of ions.^[6]

Impurities

Impurity elements in the material can have a large effect on the adhesion of oxide films. When the impurity element increases the adherence of the oxide to the metal it is known as the reactive element effect or RE effect. Many mechanics theories exist on this topic. The majority of them attribute the increase in adhesion strength to the greater thermodynamic stability of the impurity element bonded with oxygen than the metal bonded to the oxygen.^[2]^[8] Inserting yttrium into nickel alloys to strengthen the oxide adhesion is an example of the reactive element effect.

Dislocations

Oxide-support relationship

The adsorption of a monolayer of gas atoms is either commensurate or incommensurate. Commensurate adsorption is defined by having a crystal structure relationship between substrate-adsorbate layer that produces a coherent interface. Wood's notation is a description of the relationship between the simplest repeating unit area of the solid and adsorbate. The difference between the resulting commensurate interfaces can be described as an effect of misfit. The interfacial interaction can be modeled as the

_sg plus the stored elastic displacement energy due to lattice misfit. A large misfit corresponds to an incoherent interface where there is no coherency strain and the interface energy can be taken as simply the

_sg. In contrast, a small misfit corresponds with a coherent interface and coherency strain that results in the interfacial energy equivalent to the minimum

_sg.^[9]

Strength of bond

The strength of the bond between the oxide and metal for the same nominal contact area can range from Pa to GPa stresses. The cause of this huge range stems from multiple phenomena dealing with at least four different types of adhesion. The main types of bonding that form adhesion are electrostatic, dispersive (van der Waals or London forces), chemical and diffusive bonding. As the adhesive forces increase, separation in crystalline materials can go from elastic debonding to elastic-plastic debonding. This is due to a larger number of bonds being formed or an increase in strength of the bonds between the two materials. Elastic-plastic debonding is when local stresses are high enough to move dislocations or make new ones.^[10]

Solid-gas kinetics

When a gas molecule strikes a solid surface the molecule may either rebound or be adsorbed. The rate at which gas molecules strike the surface is a large factor in the overall kinetics of oxide growth. If there molecule is absorbed there are three potential outcomes. The surface interaction can be strong enough to dissociate the gas molecule into separate atoms or constituents. The molecule may also react with surface atoms to change its chemical properties. The third possibility is solid surface catalysis, a binary chemical reaction with a previously adsorbed molecule on the surface.

Dispersion

Most often it is kinetically favorable for the growth of a single oxide monolayer to be completed before the growth of subsequent layers. Dispersion in general can be modeled by:

Dispersion is crucial to the growth of oxides because only atoms that are exposed to the interface can react to form oxides.

Diffusion

After the initial oxide monolayer is formed, new layers begin to build and the ions must be able to diffuse through the oxide in order to increase thickness of the oxide. The rate of oxidation is controlled by how fast these ions are able to diffuse through the material. As the thickness of the oxide increases, the rate of oxidation decreases because it requires the atoms to travel a further distance. This rate can quantified by calculating the rate of diffusion of vacancies or ions using Fick’s first law of diffusion.^[11]

Solid surface catalysis

In 2007 the Nobel Prize in chemistry was awarded to Gerhard Ertl for the study of solid-gas interface molecular processes. One such process is the oscillatory kinetic catalysis. Oscillatory kinetic catalysis can be explained by different crystal surfaces favoring unmodified faces and reconstruction to reduce surface strain. The presence of CO can cause the reversal of surface reconstruction past a certain percent coverage. Once the reversal occurs, oxygen can be chemisorbed on the reverted surfaces. This produces an adsorption pattern with areas of surface coverage rich in CO and others O₂.^[12]

Driving force

The driving force of catalysis is determined by the difference between the unprimed equilibrium and the instantaneous interfacial free energies.^[2]