词条 | Production drawing |
释义 |
Production drawings[1][2][3] (sometimes called working drawings) are complete sets of drawings that detail the manufacturing and assembly of products (as distinct from engineering drawings prepared by and/or for production engineers whose task is to decide how best to manufacture the products). Machine operators, production line workers and supervisors all use production drawings. Design engineers also use orthographic or pictorial views called "working cases" to record their ideas. These preliminary sketches are used as the basis for both the component and assembly drawings. Production drawings are 'drawn' (graphic) information prepared by the design team for use by the construction or production team, the main purpose of which is to define the size, shape, location and production of the building or component'. Orthographic projections are often supplied, giving views of machine parts and their assembly in an accessible form akin to artistic rendering in perspective, sometimes in exploded form which illustrates how the whole may be constructed from sub-assemblies and sub-assemblies into individual components. The production drawings may describe the preferred order in which to assemble components[4] and if the engineering drawings call for a screw fastener to be tightened to a specific torque the production drawings would typically describe the tool to be used and how it should be calibrated. Material and component specifics are commonly provided in the title block of a production drawing. Sub-assemblies (or the main assembly of components) are usually shown and the production drawings may specify where each assembled component will be built. Production drawings also record the number of parts that are required for making the assembled unit and may form an essential part of the documentation required to authorise the production of the item described. Drawing setThree main sets of production drawings include the following:
Elements of production drawingsThe basic elements of production drawings include:[6]
Basic principles of dimensioning in production drawingsThe basic principles of dimensioning in production drawings include the following:
Dimensioning techniqueAny engineering drawing requires specifications in terms of dimensions.[7] Dimensions are classified as the following:
Non-functional dimensions are required for manufacturing. Auxiliary dimensions do not govern manufacturing or inspection of parts. They are arranged in the following ways:
Production drawing in limits, fits and tolerance[8]Limit systemThere are three terms used in the limit system:
The fundamental deviation is either the upper or lower deviation, depending on which is closer to the basic size. TolerancesDue to human errors, machine settings, etc., it is nearly impossible to manufacture an absolute dimension as specified by the designer. Deviation in dimensions from the basic value always arises. This deviation of dimensions from the basic value is known as Tolerance.[7] The figure shows mechanical tolerances which occur during operations. FitsThe relation between tightness and looseness between two mating parts is called fit. Depending upon the actual limits of the hole or shaft sizes, fits may be classified as clearance fit, transition fit and interference fit.[9] Clearance fitClearance fit is defined as a clearance between mating parts. In clearance fit, there is always a positive clearance between the hole and shaft. Transition fitTransition fit may result in either an interference or clearance, depending upon the actual values of the tolerance of individual parts. Interference fitInterference fit is obtained if the difference between the hole and shaft sizes is negative before assembly. Interference fit generally ranges from minimum to maximum interference. The two extreme cases of interference are as follows: Minimum interferenceThe magnitude of the difference (negative) between the maximum size of the hole and the minimum size of the shaft in an interference fit before assembly. Maximum interferenceThe magnitude of the difference between the minimum size of the hole and the maximum size of the shaft in an interference or a transition fit before assembly. Hole Basis and shaft basis system: In identifying limit dimensions for the three classes of fit, two systems are in use:
Production drawing in surface roughnessThe properties and performance of machine components are affected by the degree of roughness of various surfaces; the higher the smoothness of the surface, the greater the fatigue strength and corrosion resistance will be.[10] Friction between mating parts is also reduced by a smoother surface finish. The geometrical characteristics of the surface, in relation to roughness, are as follows:
Surface roughness can be evaluated with the height and mean roughness index of micro-irregularities. Surface roughness is defined by the following terms:
Surface roughness number: The surface roughness number [R(a)] represents the average departure of the surface from the projections over the sampling length, which is expressed in micrometers. It is given by R(a)={h1+h2+h3+.....+hn}/n. Surface roughness can be measured using some of the following terms:
Production drawing and process sheetsProduction drawing roughness skew is shown in the accompanying figure. Process sheetsThe production drawing of a component is usually accompanied by a sheet known as a process sheet, which indicates the sequence of operations recommended for manufacturing. It should list the machinery, tooling and skills for each act or event. The process sheet should consist of the following:
Uses of process sheetsProcess sheets provide:
Principles of production drawingsProduction drawings are to be prepared on standard size drawing sheets and or prints. The correct size of sheet and size of object can be visualized not only from the views graphic views of but also from the various types of lines used, dimensions, notes, scales, etc. which enable everyone concerned - so long as they are fully conversant with the conventions used - to have a clear and unambiguous understanding of tasks, products and process. The ISO 128 international standards describe drawing conventions is some detail, including views, lines, cuts and sections but these are not in universal use (in India these standards are set by the Bureau of Indian Standards). Drawing sheetsIn production drawing standard size sheets are generally used to save paper and facilitate convenient storage of drawings. In specifications of sheets their size, the size of the title block and its position, the thickness of borders and frames etc., must be considered. Sheet sizeThe basic principles to be followed in the sizes of drawing sheets are:
For the reference size (A4), with a surface area of 1 sq meter, X=210mm and Y=297mm. Title blockThe title block, containing the identification of the drawing, should lie within the drawing space at the bottom right hand corner. The direction of viewing of the title block should correspond in general with that of the drawing. The block can have a maximum length of 180 mm. See also
References1. ^{{cite book|title=Production Drawing|publisher=New Age International|isbn=81-224-0953-9|author=K.L. Narayana}} 2. ^{{cite book|last=Bhatt|first=N.D.|title=Machine Drawing|publisher=Charotar Publishing House|isbn=978-81-85594-95-8}} 3. ^{{cite book|last=Reddy|first=Venkata|title=Production Drawing|year=2009|publisher=New Age International|isbn=978-81-224-2288-7}} 4. ^{{cite book|last=Miller|first=John|title=Production Drawings|year=1932|publisher=Rice Institute}} 5. ^{{cite book|last1=Narayana|first1=K. L.|title=Production Drawing|pages=1|accessdate=13 January 2015}} 6. ^{{cite book|last=Narayana|first=K|title=Machine Drawing|isbn=81-224-0953-9}} 7. ^1 Machine Drawing & Computer Graphics, Farazdak Haideri, Nirali Prakashan. {{ISBN|978-93-8072-527-7}} 8. ^Production Drawing, K.L. Narayana, New Age International Publishers. {{ISBN|81-224-0953-9}} 9. ^Machine Drawing, P. Kannaiah, New Age International Publishers. {{ISBN|978-81-224-1917-7}} 10. ^{{cite book|last=Pohit|first=Goutam|title=Machine Drawing with AutoCAD|year=2002|publisher=Pearson Education|isbn=81-317-0677-X}} External links
1 : Product design |
随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。