1. Description

2. External links

Unidirectional Link Detection (UDLD) is a data link layer protocol from Cisco Systems to monitor the physical configuration of the cables and detect unidirectional links. UDLD complements the Spanning Tree Protocol which is used to eliminate switching loops.

• Unidirectional Link Detection (UDLD) is one of two major features (UDLD and loop guard) in Cisco Switches to prevent Layer 2 loops.
• Spanning-Tree Protocol (STP) resolves redundant physical topology into a loop-free, tree-like forwarding topology via blocking one or more ports.

However, Unidirectional Link failure can cause "traffic blackholing" and loop in the Switch topology.

• In order to detect the unidirectional links before the forwarding loop is created, UDLD works by exchanging protocol packets between the neighboring devices.
• In order for UDLD to work, both switch devices on the link must support UDLD and have it enabled on respective ports.

Description

If two devices, A and B, are connected via a pair of optical fibers, one used for sending from A to B and other for sending from B to A, the link is bidirectional (two-way). If one of these fibres is broken, the link has become one-way or unidirectional. The goal of the UDLD protocol is to detect a broken bidirectional link (e.g. transmitted packets do not arrive at the receiver, or the fibres are connected to different ports).

For each device and for each port, a UDLD packet is sent to the port it links to. The packet contains sender identity information (device and port), and expected receiver identity information (device and port). Each port checks that the UDLD packets it receives contain the identifiers of his own device and port.

UDLD is a Cisco-proprietary protocol but HP, Extreme Networks, and AVAYA all have a similar feature calling it by a different name. HP calls theirs Device Link Detection Protocol (DLDP). Extreme Networks call it Extreme Link Status Monitoring (ELSM) and AVAYA calls theirs, Link-state Tracking.

Similar functionality in a standardized form is provided as part of the Ethernet OAM protocol that is defined as part of the Ethernet in the First Mile changes to 802.3 (previously 802.3ah). D-Link has their DULD feature built on top of Ethernet OAM function. Brocade devices running Ironware support a proprietary form of UDLD.

The use of UDLD over 10GbE is augmented, as per 802.3ae/D3.2 standard, when a fault is detected in the physical link:

• The local device signals local fault is signaled by PHY
• The local device ceases transmission of MAC frames and transmits remote fault
• The remote device receives remote fault and stops sending frames and continuously generates idle frames

External links

• Understanding and Configuring the Unidirectional Link Detection Protocol Feature at Cisco Systems
• {{cite web |url=https://www.iol.unh.edu/sites/default/files/knowledgebase/10gec/10GbE_fault_signaling.pdf |format=pdf |title=10Gig Link Fault Signaling Updated to IEEE Draft P802.3ae/D3.2}}

• The Past Was Faster
• The Patch and the Wineskins
• The Patchwork Girl of Oz (1914 film)
• The Patent Commons Project
• The Patent Office
• The Patera constant
• The Paternal Admonition
• The Path Between the Seas
• The Path (comics)
• The Pathfinder
• The Pathfinder (novel)
• The Pathfinder, or The Inland Sea
• The Pathfinders
• The Pat Hobby Stories
• The Path of Cinnabar
• The Path of Neo
• The Path of Power: The Years of Lyndon Johnson
• The Path of Sorrows
• The Pathological Liar
• The Paths of the Dead
• The Paths of the Perambulator
• The Path to 9/11
• The path to 911
• The Path to 911
• The path to 9/11