请输入您要查询的百科知识：

　

词条 Bio-ink
释义

  1. Printability

  2. Common

     Alginate-based  Gelatin-based  Decellularized ECM-based  Pluronics 

  3. See also

  4. References

  5. External links

{{UPE|date=July 2018}}{{primary|date=July 2018}}Bioinks are substances made of living cells that can be used for 3D printing of complex tissue models. Bioinks are materials that mimic an extracellular matrix environment to support the adhesion, proliferation, and differentiation of living cells. Bioinks distinguish themselves from traditional biomaterials such as hydrogels, polymer networks, and foam scaffolds due to their ability to be deposited as filaments during an additive manufacturing process.[1] Additionally, unlike traditional additive manufacturing materials such as thermoplastic polymers, ceramics, and metals which require the use of harsh solvents, cross-linking modalities and high temperatures to be printed, bioinks are processed under much milder conditions. These mild conditions are necessary to preserve compatibility with living cells, and prevent degradation of bioactive molecules and macroproteins. These bioinks are often adopted from existing hydrogel biomaterials and derived from natural polymers such as gelatins, alginates, fibrin, chitosan, and hyaluronic acids that are sensitive to their processing conditions.[2]

Unlike the thermoplastics that are often utilized in traditional 3D printing, the chain entanglements and ionic interactions within the hydrogel-like [3] bioink rather than temperature dominate shape fidelity. The natural derivation of many bioinks often results in a high water content and sensitivity to harsh processing conditions.[4] Therefore, bioink filaments are often deposited at or below human body temperature and under mild conditions to preserve bioink printability. Additional considerations must be taken into account when printing bioinks blended with a cell suspension due to the need to preserve cell viability.

Differences from traditional 3D printing materials

  • Printed at a much lower temperature (37 °C or below)
  • Mild cross-linking conditions
  • Natural derivation
  • Bioactive
  • Cell manipulatable

Printability

Bioink compositions and chemistries are often inspired and derived from existing hydrogel biomaterials. However, these hydrogel biomaterials were often developed to be easily pipetted and cast into well plates and other molds. Altering the composition of these hydrogels to permit filament formation is necessary for their translation as bioprintable materials. However, the unique properties of bioinks offer new challenges in characterizing material printability.[5] Unlike traditional 3D printing materials such as thermoplastics that are essentially 'fixed' once they are printed, bioinks are a dynamic system due to their high water contains and often non-crystalline structure. The shape fidelity of the bioink after filament deposition must also be characterized.[6] Finally, the printing pressure and nozzle diameter must be taken into account to minimize the shear stresses placed on the bioink and on any cells within the bioink during the printing process. Too high shear forces may damage or lyse cells, adversely affecting cell viability.

Important considerations in printability include:

  • Uniformity in filament diameter
  • Angles at the interaction of filaments
  • "Bleeding" of filaments together at intersects
  • Maintenance of shape fidelity after printing but before cross-linking
  • Printing pressure and nozzle diameter

Common

Alginate-based

Alginate is a naturally derived biopolymer from the cell wall of brown algae that has been widely used as a biomaterial. Alginates are particularly suitable for bioprinting due to their mild cross-linking conditions via incorporation of divalent ions such as calcium. These materials have been adopted as bioinks through increasing their viscosity.[7] Additionally, these alginate-based bioinks can be blended with other materials such as nanocellulose for application in tissues such as cartilage.[8]

Gelatin-based

Gelatin has been widely utilized as a biomaterial for engineered tissues. The formation of gelatin scaffolds is dictated by the physical chain entanglements of the material which forms a gel at low temperatures. However, at physiological temperatures, the viscosity of gelatin drops significantly. Methacrylation of gelatin is a common approach for the fabrication of gelatin scaffolds that can be printed and maintain shape fidelity at physiological temperature.[9]

Decellularized ECM-based

Decellularized extracellular matrix based bioinks can be derived from nearly any mammalian tissue. However, often organs such as heart, muscle, cartilage, bone, and fat are decellularized, lyophilized, and pulverized, to created a soluble matrix that can then be formed into gels.[10] These bioinks possess several advantages over other materials due to their derivation from mature tissue. These materials consist of a complex mixture of ECM structural and decorating proteins specific to their tissue origin. Therefore, dECM-derived bioinks are particularly tailored to provide tissue-specific cues to cells. Often these bioinks are cross-linked through thermal gelation or chemical cross-linking such as through the use of riboflavin.[11]

Pluronics

Pluronics have been utilized in printing application due to their unique gelation properties.[12] Below physiological temperatures, the pluronics exhibit low viscosity. However, at physiological temperatures, the pluronics form a gel. However, the formed gel is dominated by physical interactions. A more permanent pluronic-based network can be formed through the modification of the pluronic chain with acrylate groups that may be chemically cross-linked.[13]

See also

{{div col}}
  • 3D printing
  • 3D bioprinting
  • List of 3D printer manufacturers
  • List of common 3D test models
  • List of emerging technologies
  • List of notable 3D printed weapons and parts
  • Organ-on-a-chip
{{div col end}}

References

1. ^{{cite journal|last1=Hospodiuk|first1=Monika|last2=Dey|first2=Madhuri|last3=Ozbolat|first3=Ibrahim|title=The bioink: A comprehensive review on bioprintable materials|journal=Biotechnology Advances|date=Jan 3, 2017|url=http://www.sciencedirect.com/science/article/pii/S0734975016301719}}
2. ^{{cite journal|last1=Malda|first1=Jos|title=25th Anniversary Article: Engineering Hydrogels for Biofabrication|journal=Advanced Materials|date=2013|volume=25|issue=36|pages=5011–5028|doi=10.1002/adma.201302042|pmid=24038336}}
3. ^{{cite journal|last1=Hoffman|first1=Allan|title=Hydrogels for biomedical applications|journal=Advanced Drug Delivery Reviews|date=3 September 2002|volume=64|issue=Supplement|pages=18–23|url=http://www.sciencedirect.com/science/article/pii/S0169409X12002700|doi=10.1016/j.addr.2012.09.010}}
4. ^{{cite journal|last1=Carrow|first1=James|last2=Kerativitayanan|first2=Punyavee|last3=Jaiswal|first3=Manish|last4=Lokhande|first4=Giriraj|last5=Gaharwar|first5=Akhilesh|title=Polymers for Bioprinting|journal=Essentials of 3D Biofabrication and Translation|date=2015|pages=229–248|url=https://www.researchgate.net/publication/281108634}}
5. ^{{cite journal|last1=Hölzl|first1=Katja|last2=Lin|first2=Shengmao|last3=Tytgat|first3=Liesbeth|last4=Van Vlierberghe|first4=Sandra|last5=Gu|first5=Linxia|last6=Ovsianikov|first6=Aleksandr|title=Bioink properties before, during and after 3D bioprinting|journal=Biofabrication|date=September 23, 2016|volume=8|issue=3|page=032002|doi=10.1088/1758-5090/8/3/032002|pmid=27658612}}
6. ^{{cite journal|last1=Ouyang|first1=Liliang|title=Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells|journal=Biofabrication|date=2016|volume=8|issue=3|page=035020|doi=10.1088/1758-5090/8/3/035020|pmid=27634915}}
7. ^{{cite journal|last1=Jia|first1=Jia|title=Engineering alginate as bioink for bioprinting|journal=Acta Biomaterialia|date=2014|volume=10|issue=10|pages=4323–4331|url=http://www.sciencedirect.com/science/article/pii/S1742706114002906|doi=10.1016/j.actbio.2014.06.034|pmid=24998183|pmc=4350909}}
8. ^{{cite journal|last1=Markstedt|first1=Kajsa|title=3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications|journal=Biomacromolecules|date=2015|volume=16|issue=5|pages=1489–1496|doi=10.1021/acs.biomac.5b00188|pmid=25806996}}
9. ^{{cite journal|last1=Hoch|first1=Eva|title=Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting|journal=Journal of Materials Chemistry B|date=2013|volume=1|issue=41|pages=5675–5685|url=http://pubs.rsc.org/is/content/articlelanding/2013/tb/c3tb20745e#!divAbstract|doi=10.1039/c3tb20745e}}
10. ^{{cite journal|last1=Pati|first1=Falguni|title=Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink.|journal=Nature Communications|volume=5|date=2014|issue=5|page=3935|pmid=24887553|pmc=4059935|doi=10.1038/ncomms4935}}
11. ^{{cite journal|last1=Jang|first1=Jinah|title=Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking.|journal=Acta Biomaterialia|date=2016|volume=33|pages=88–95|pmid=26774760|doi=10.1016/j.actbio.2016.01.013}}
12. ^{{cite journal|last1=Tirnaksiz|first1=Figen|title=Rheological, mucoadhesive and release properties of pluronic F-127 gel and pluronic F-127/polycarbophil mixed gel systems.|journal=Die Pharmazie|date=2005|volume=60|issue=7|pages=518–23|pmid=16076078}}
13. ^{{cite journal|last1=Müller|first1=Michael|title=Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting|journal=Biofabrication|date=2015|volume=7|issue=3|page=035006|pmid=26260872|doi=10.1088/1758-5090/7/3/035006}}

External links

1 : Biomaterials
随便看

　

开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。

　

Copyright © 2023 OENC.NET All Rights Reserved
京ICP备2021023879号 更新时间：2024/9/21 1:38:12