| 词条 | Daylight redirecting film |
| 释义 |
| align =right | direction = horizontal | image1 = Prism tiles daylighting a room.jpg | alt1 = | caption1 = Optimal daylighting of a room using prism lighting. The prism tile canopies mounted outside over the windows send light skimming across the ceiling, so that workers deeper in the room also have natural light coming over their left shoulders. Multiple prescriptions of prism tiles are used, so some light is also sent horizontally and slightly downwards.[1] | image2 = Daylight Redirecting Film.jpg | alt2 = | caption2 = The see-through reflection-based daylight redirecting film, is applied to the inside of top part of the windows, is reflecting light up onto the ceiling. Glare is reduced without reducing the amount of daylight in a room. | image3 = DRF 10pct.jpg | alt3 = | caption3 = The same film in a similar room, but at another sun angle. The light is reflected at a shallower angle, lighting the room more evenly. Daylight redirecting film (DRF) is a thin, flexible plastic film which can be applied to a window to refract or reflect incoming light upwards, so that the deeper parts of the room are lit more evenly. It can be used as a substitute for opaque blinds. It is a form of prism lighting. Function{{multiple image| align = left | image1 = Before prism lighting.jpg | alt1 = Woodcut? of a room with lighting only near the window | image2 = After prism lighting.jpg | alt2 = An evenly-lit room | footer = Prism tiles distribute window light more evenly, before and after }} The human eye's response to light is non-linear: halving the light level does not halve the perceived brightness of a space, it makes it look only slightly dimmer.{{citation needed|date=October 2017}} If light is redistributed from the brightest parts of a room to the dimmest, the room therefore appears brighter overall, and more space can be given a useful and comfortable level of illumination (see before and after images from an 1899 article, left). This can reduce the need for artificial lighting. Refraction and total internal reflection inside optical prisms can bend beams of light. This bending of the light allows it to be redistributed. While the films do save energy from lighting, the savings vary substantially by climate, aspect, electricity costs, and existing lighting type. At 2014 costs, including labour, payback time may be measured in decades.[3] This film increases the sunlight area by 200%. It is effective not only for lighting energy but also for cooling and heating energy saving. With the growing interest in green energy buildings, the interest in these Daylight redirecting films is also growing. ManufactureDaylight redirecting film is made of acrylic[3] on a flexible polyester backing, one side coated with a pressure-sensitive adhesive (to make it peel-and-stick). There are two types of film. Some film is moulded with tiny prisms, making a flexible peel-and-stick miniature prismatic panel. The prisms are joined at the edges into a sheet. A prism sheet is somewhat like a linear Fresnel lens, but each ridge may be identical. Unlike a Fresnel lens, the light is not intended to be focused, but used for anidolic lighting. Other film is moulded with thin near-horizontal voids protruding into or through the acrylic; the slits reflect light hitting their top surfaces upwards.[1] Refraction is minimized, to avoid colouring the light. The reflection-based films are more transparent (both are translucent), but they tend to send the light up at the ceiling, not deeper into the room. Refraction-based films are translucent rather than transparent, but offer finer control over the direction of the outgoing light beam; the film can be made in a variety of prism shapes to refract light by a variety of angles. Refraction-based films are a lighter modern version of glass prism tiles. Daylight redirecting window film was initially made of one redirecting film and one glare-reducing diffusing film, often located on different interior surfaces of a double-glazed window, but integrated single films are now available.[10] Due to the prism structure, it works only at certain angles. By making DRF blind, you can always keep the same effect. Add UV blocking filters to the film to block harmful UV rays. See also
References1. ^{{cite web|url=https://sweets.construction.com/swts_content_files/154130/2263001.pdf|format=PDF|title=SerraGlaze : Q&A|website=Sweets.construction.com|accessdate=13 February 2019}} [2][3][4]2. ^1 2 Daylight Redirecting Window Film, Energy Efficiency Emerging Technologies. E3tnw.org 3. ^1 {{Citation | editor1 = Henry Crew, Ph.D.|editor2=Olin H. Basquin, A.M. | title = Pocket Hand-book of Electro-glazed Luxfer Prisms containing useful information and tables relating to their use For Architects, Engineers and Builders. | year = 1898 | website = Glassian | url =http://glassian.org/Prism/Luxfer/Handbook/page1.html | access-date = }} 4. ^1 Object of the Moment: 3M Daylight Redirecting Film by 3M, by Selin Ashaboglu, March 02, 2017 }} 5 : Solar architecture|Energy-saving lighting|Architecture|Prisms|Plastics |
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。