1. Medical device design in the United States

2. FDA Regulation and Oversight
     Pathway to Approval   Regulatory Controls  General Controls  Special Controls  Premarket Approval  Risk Classification   Class I: General controls    Class II: General controls and special controls    Class III: General controls and premarket approval  

3. Nanomanufacturing

4. Additive manufacturing
     Biocompatibility  

5. Cybersecurity

6. References

Medical device design, as the name suggests, refers to the design of medical devices. Due to the large amount of regulations in the industry, the design of medical devices presents significant challenges from both engineering and legal perspectives.

Medical device design in the United States

The United States medical device industry is one of the largest markets globally, exceeding $110 billion annually. In 2012 it represented 38% of the global market and currently more than 6500 medical device companies exist nationwide. These companies are primarily small-scale operations with fewer than 50 employees. The most medical device companies are in the states: California, Florida, New York, Pennsylvania, Michigan, Massachusetts, Illinois, Minnesota, and Georgia. Washington, Wisconsin, and Texas also have high employment levels in the medical device industry.^[1] The industry is divided into the following branches: Electro-Medical Equipment, Irradiation Apparatuses, Surgical and Medical Instruments, Surgical Appliances and Supplies, and Dental Equipment and Supplies.^[1]

FDA Regulation and Oversight

Medical devices are defined by the US Food and Drug Administration (FDA) as any object or component used in diagnosis, treatment, prevention, or cure of medical conditions or diseases, or affects body structure or function through means other than chemical or metabolic reaction in humans or animals.^[2] This includes all medical tools, excluding drugs, ranging from tongue depressors to Computerized Axial Tomography (CAT) scanners to radiology treatments. Because of the wide variety of equipment classified as medical devices, the FDA has no single standard to which a specific device must be manufactured; instead they have created an encompassing guide that all manufacturers must follow. Manufacturers are required to develop comprehensive procedures within the FDA framework in order to produce a specific device to approved safety standards.

Pathway to Approval

The USFDA allows for two regulatory pathways that allow the marketing of medical devices. The first, and by far the most common is the so-called 510(k) clearance process (named after the Food, Drug, and Cosmetic Act section that describes the process). A new medical device that can be demonstrated to be "substantially equivalent" to a previously legally marketed device can be "cleared" by the FDA for marketing as long as the general and special controls, as described below, are met. The vast majority of new medical devices (99%) enter the marketplace via this process. The 510(k) pathway rarely requires clinical trials. The second regulatory pathway for new medical devices is the Premarket Approval process (PMA), described below, which is similar to the pathway for a new drug approval. Typically, clinical trials are required for this premarket approval pathway.^[3]

Regulatory Controls

General Controls

General controls include provisions that relate to:

• adulteration;
• misbranding;
• device registration and listing;
• premarket notification;
• banned devices;
• notification, including repair, replacement, or refund;
• records and reports;
• restricted devices; and
• good manufacturing practices.^[5]

Special Controls

Special controls were established for cases in which patient safety and product effectiveness are not fully guaranteed by general controls. Special controls may include special labeling requirements, mandatory performance standards and postmarket surveillance.^[6] Special controls are specific to each device and classification guides are available for various branches of medical devices.^[4]

Premarket Approval

Premarket Approval is a scientific review to ensure the device's safety and effectiveness, in addition to the general controls of Class I.^[8][6]

Risk Classification

Under the Food, Drug, and Cosmetic Act, the U.S. Food and Drug Administration recognizes three classes of medical devices, based on the level of control necessary to assure safety and effectiveness.^[5] The classification procedures are described in the Code of Federal Regulations, Title 21, part 860 (usually known as 21 CFR 860).^[6] Devices are classified into three brackets:

• Class I: General Controls;
• Class II: General Controls and Special Controls;
• Class III: General Controls and Premarket Approval.^[7]

Regulations differ by class based on their complexity or the potential hazards in the event of malfunction. Class I devices are the least likely to cause major bodily harm or death in the event of failure, and are subjected to less stringent regulations than are devices categorized as Class II or Class III.^[7]

Class I: General controls

Class I devices are subject to the least regulatory control. Class I devices are subject to "General Controls" as are Class II and Class III devices.^[5][8][9]

General controls are the only controls regulating Class I medical devices. They state that Class I devices are not intended to be:

1. For use in supporting or sustaining life;
2. Of substantial importance in preventing impairment to human life or health; and
3. May not present an unreasonable risk of illness or injury.^{&91;9&93;&91;10&93;}

Most Class I devices are exempt from premarket notification and a few are also exempted from most good manufacturing practices regulations.^[5][8][9]

Examples of Class I devices include hand-held surgical instruments, (elastic) bandages, examination gloves, bed-patient monitoring systems, medical disposable bedding, and some prosthetics such as hearing aids.^[8][11]

Class II: General controls and special controls

Class II devices are those for which general controls alone cannot assure safety and effectiveness, and existing methods are available that provide such assurances.^[5][8] Devices in Class II are held to a higher level of assurance and subject to stricter regulatory requirements than Class I devices, and are designed to perform as indicated without causing injury or harm to patient or user. In addition to complying with general controls, Class II devices are also subject to special controls.^[8]

Examples of Class II devices include acupuncture needles, powered wheelchairs, infusion pumps, air purifiers, and surgical drapes.^[5][8][12]

A few Class II devices are exempt from the premarket notification.^[8]

Class III: General controls and premarket approval

A Class III device is one for which insufficient information exists to assure safety and effectiveness solely through the general or special controls sufficient for Class I or Class II devices.^[5][8] These devices are considered high-risk and are usually those that support or sustain human life, are of substantial importance in preventing impairment of human health, pose a potential, unreasonable risk of injury or illness, or are of great significance in preventative care.^[8]. For these reasons, Class III devices require premarket approval.

Prior to marketing a Class III device, the rights-holder(s) or person(s) with authorized access must seek FDA approval. The review process may exceed six months for final determination of safety by an FDA advisory committee. Many Class III devices have established guidelines for Premarket Approval (PMA) and increasingly, must comply with unique device identifier regulations.^[13] However, with ongoing technological advances many Class III devices encompass concepts not previously marketed, These devices may not fit the scope of established device categories and do not yet have developed FDA guidelines.^[14]

Examples of Class III devices that currently require a premarket notification include implantable pacemaker, pulse generators, HIV diagnostic tests, automated external defibrillators, and endosseous implants.^[8]

Nanomanufacturing

Nanomanufacturing techniques provide a means of manufacturing cellular-scale medical devices (<100μm). They are particularly useful in the context of medical research, where cellular-scale sensors can be produced that provide high-resolution measurements of cellular-scale phenomena.^[15] Common techniques in the area are direct-write nanopatterning techniques such as dip-pen nanolithography, electron-beam photolithography and microcontact printing, directed self-assembly methods, and Functional Nanoparticle Delivery (NFP), where nanofountain probes deliver liquid molecular material that is drawn through nanopattern channels by capillary action.^[16]

Additive manufacturing

Biocompatibility

The largest issue in integrating AM techniques into medical device manufacturing is biocompatibility. These issues arise from the stability of 3D printed polymers in the body and the difficulty of sterilizing regions between printed layers.^[19] In addition to the use of primary cleaners and solvents to remove surface impurities, which are commonly isopropyl alcohol, peroxides, and bleach,^[20] secondary solvents must be use in succession to remove the cleaning chemicals applied before them, a problem that increases with the porosity of the material used.^[19] Common compatibility AM materials include nylon^[21] and tissue material from the host patient.^[20]

Cybersecurity

Many medical devices have either been successfully attacked or had potentially deadly vulnerabilities demonstrated, including both in-hospital diagnostic equipment^[22] and implanted devices including pacemakers^[23] and insulin pumps.^[24] On 28 December 2016 the US Food and Drug Administration released its recommendations that are not legally enforceable for how medical device manufacturers should maintain the security of Internet-connected devices.^[25][26]

References

• Surya Wonowidjoyo
• Surya Yalamanchili
• Su Ryden
• Sury-en-Vaux
• Sury-es-Bois
• Sury-le-Comtal
• Suryo Agung Wibowo
• Suryo Line
• Suryoyo flag
• Sury-pres-Lere
• Sury-près-Léré
• Suryty
• Sury-ès-Bois
• Surzyki Male
• Surzyki Małe
• Surzyki Wielkie
• Surány
• Surányi György
• Suré
• Suréna (Corneille)
• Surésh Dhargalkar
• Surət Hüseynov
• Sur – The Melody of Life
• SUS2008
• SUSA