词条 | Modelling Condensate Distillation Coloumn |
释义 |
}} Distillation is a process in which we separate two components where one is overhead distillate and the other is the bottom product. The bottom product is mostly liquid while the distillate may be liquid or vapour. This separation requires the following three things:
The distillation column contains one feed component, xf. The top product is distillate which is represented by xDand the bottom product containing composition ofxB of the light component. It consist of three sections: stripping section, rectification section, and feed section. Overhead Condenser: This is a heat exchange equipment used for condensing the hot liquid leaving the top of the column. Either cooling water or air is used as a cooling agent. Overhead Accumulator: This a horizontal pressure vessel where the condensed vapour is collected. Pumps: They can be used to return the reflux liquid back to the distillation column. Reboiler: Its purpose is to produce the vapour stream in the distillation column. It can be used internally and externally. Stream reboiler and fired reboiler are used. Math modelThe total mole hold up in the nth tray Mn is considered constant but the imbalance in the input and output flows is taken into account for in the component and the heat balance equations- InletPhase Flow rate Concentration Liquid Vapour OutletPhase Flow rate Concentration Liquid Vapour (Note:) Component balance[1]: (1) by differentiating and substituting above equation we get Energy Balance[2]: (2) substituting the mass balance equation in above equation we get the following expression: where, V:- represents vapour flow, L:- is liquid flow, x:- is liquid concentration of light component, y:- represents vapour concentration of light component, h:- is enthalpy for liquid ; and H:-is enthalpy for vapour References 1 : Distillation |
随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。