- Normal gravity
- Somigliana Formula
- Approximation formula from series expansions International gravity formula 1930 International gravity formula 1967 International gravity formula 1980
- Height dependence
- WELMEC formula
- Example
- Books
- References
- Links
Normal gravity formulas are mathematical expressions, with which the free-fall acceleration at a point in vicinity to the surface of the earth can be estimated. Along with the mass (known or predicted) of a body, the weight is calculated.
Normal gravity
The acceleration due to gravity depends on the gravity of the mass, which rests inside of the object. The gravity decreases at longer distance between centers of mass. The acceleration due to gravity furthermore is influenced by the rotation of the earth. As centifugal force increases at longer earth's axis distance, thus centrifugal force is highest at the equator and lowest the poles.
The formulas for calculating the normal gravity is based on the assumption of an imagined rotationally symmetrical ellipsoid model of the earth, the surface of which is identical to an equipotential surface. Consequently this formula depends only on the geographical latitude and the elevation of geographical location.
Somigliana Formula
For the normal gravity 
of the sea level ellipsoid, i.e. elevation h = 0, this formula by Somigliana (1929) applies (after Carlo Somigliana (1860–1955)[1]):
with
-
= Normal gravity at Equator -
= Normal gravity at Poles - a = semi-major axis (Equator radius)
- b = semi-minor axis (Pole radius)
-
= latitude
Due to numerical issues, the formula is simplified into this:
with
-
-
is the eccentricity
For the Geodetic Reference System 1980 (GRS 80) the parameters are set to these values:
Approximation formula from series expansions
The Somigliana formula was approximated through different series expansions, following this scheme:
International gravity formula 1930
The normal gravity formula by Gino Cassinis was determined in 1930 by International Union of Geodesy and Geophysics as international gravity formula along with Hayford ellipsoid. The parameters are:
In the course of time the values were improved again with newer knowledge and more exact measurement methods.
Harold Jeffreys improved the values in 1948 at:
International gravity formula 1967
The normal gravity formula of Geodetic Reference System 1967 is defined with the values:
International gravity formula 1980
From the parameters of GRS 80 comes the classic series expansion:
The accuracy is about ±10−6 m/s2.
With GRS 80 the following series expansion is also introduced:
As such the parameters are:
- c1 = 5.279 0414·10−3
- c2 = 2.327 18·10−5
- c3 = 1.262·10−7
- c4 = 7·10−10
The accuracy is at about ±10−9 m/s2 exact. When the exactness is not required, the terms at further back can be omitted. But it is recommended to use this finalized formula.
Height dependence
Cassinis determined the height dependence, as:
The average rock density ρ is no longer considered.
Since GRS 1967 the dependence on the ellipsoidal elevation h is:
Another expression is:
with the parameters derived from GSR80:
This adjustment is about right for common heights in Aviation; But for heights up to outer space (over ca. 100 kilometers) it is out of range.
WELMEC formula
In all German standards offices the free-fall acceleration g is calculated in respect to the average latitude φ and the average height above sea level h with the WELMEC–Formel:
The formula is based on the International gravity formula from 1967.
The scale of free-fall acceleration at a certain place must be determined with precision measurement of several mechanical magnitudes. Weighing scales, the mass of which does measurement because of the weight, relies on the free-fall acceleration, thus for use they must be prepared with different constants in different places of use. Through the concept of so-called gravity zones, which are divided with the use of normal gravity, a weighing scale can be calibrated by the manufacturer before use.[2]
Example
Free-fall acceleration in Schweinfurt:Data:- Latitude: 50° 3′ 24″ = 50.0567°
- Height above sea level: 229.7 m
- Density of the rock plates: ca. 2.6 g/cm³
- Measured free-fall acceleration: g = 9.8100 ± 0.0001 m/s²
- Cassinis: g = 9.81038 m/s²
- Jeffreys: g = 9.81027 m/s²
- WELMEC: g = 9.81004 m/s²
Books
- Wolfgang Torge: Geodäsie. 2. Auflage. Walter de Gruyter, Berlin u.a. 2003. {{ISBN|3-11-017545-2}}
- Wolfgang Torge: Geodäsie. Walter de Gruyter, Berlin u.a. 1975 {{ISBN|3-11-004394-7}}
References
2. ^{{cite web|title=Das europäische Gravitationszonenkonzept nach WELMEC|trans-title=|periodical=|publisher=|url=http://www.ptb.de/de/org/1/11/115/doc/gravzonen.pdf|format=pdf|accessdate=26 February 2011|last=Roman Schwartz, Andreas Lindau|date=|year=|month=|day=|language=German|pages=|quote=}} 700kB
Links
- Definition des Geodetic Reference System 1980 (GRS80) (pdf, engl.; 70 kB)
- Gravity Information System der Physikalisch-Technischen Bundesanstalt, engl.
- Online-Berechnung der Normalschwere mit verschiedenen Normalschwereformeln
- New York City borough president
- New York City Breakers
- New York City Community College
- New York City Community College, Brooklyn, New York
- New York City Comptroller
- New York City council
- New York City courts
- New York City Department of Buildings
- New York City Department of City Planning
- New York City Department of Correction
- New York City Department of Corrections
- New york city department of education
- New York City Department of Environmental Protection
- New York City Department of Environmental Protection Police
- New York City Department of Parks
- New York City Department of Parks & Recreation
- New York City Department of Sanitation
- New York City Department of Transportation
- New York City (disambiguation)
- New York City DOE
- New York City DOE District 22
- New York City DOE Region1
- New York City DOE Region10
- New York City DOE Region 10
- New York City DOE Region 2