请输入您要查询的百科知识:

 

词条 SNCF 232.P.1
释义

  1. Origins

  2. Description

  3. Service history

  4. Conclusion

  5. Tender

  6. References

{{Orphan|date=January 2017}}{{Infobox locomotive
| name = SNCF 232.P.1
| image = Dampfmotor-Hochdrucklokomotive SNCF 232 P 1.jpg
| alt =
| caption =
| powertype = Steam
| designer =
| builder = SACM
| ordernumber =
| serialnumber = SACM 7759
| buildmodel =
| builddate = 1939
| totalproduction = 1
| whytetype = 4-6-4
| uicclass = 2′C2′ h18
| driver =
| gauge = {{track gauge|sg}}
| leadingdiameter =
| driverdiameter = {{convert|1550|mm|ftin|frac=16}}
| trailingdiameter =
| tenderdiameter =
| minimumcurve =
| wheelbase =
| engine total =
| leading = {{convert|2300|mm|ftin|frac=4}}
| drivers = {{convert|4100|mm|ftin|frac=4}}
| trailing = {{convert|2300|mm|ftin|frac=4}}
| tender total =
| tendertruck =
| tenderbogie =
| pivotcentres =
| wheelspacing =
| length = {{ubl|Loco: {{convert|15070|mm|ftin|frac=4}}|Loco & tender: {{convert|25015|mm|ftin|frac=4}}}}
| over couplers =
| over bufferbeams=
| width = {{convert|2930|mm|ftin|frac=8}}
| height = {{convert|4250|mm|ftin|frac=8}}
| frametype =
| axleload =
| leadingbogie/pony=
| coupled all =
| coupled 1 =
| coupled 2 =
| coupled 3 =
| coupled 4 =
| coupled 5 =
| coupled 6 =
| coupled 7 =
| coupled 8 =
| trail bogie/pony=
| tenderbogieload =
| tenderaxle =
| weightondrivers =
| locoweight = {{convert|126|t}}
| tenderweight =
| locotenderweight =
| tendertype = SNCF 36.B
| fueltype = Coal
| fuelcap = {{convert|9|t}}
| watercap = {{convert|36000|l}}
| sandcap =
| fireboxtype =
| firearea = {{convert|3.5|m2|abbr=on}}
| boiler =
| boilertype =
| pitch =
| diameterinside =
| lengthinside =
| smalltubediameter=
| largetubediameter=
| boilerpressure = {{ubl|HP: {{convert|60|kgf/cm2|MPa psi|sigfig=3|abbr=on}}|LP: {{convert|20|kgf/cm2|MPa psi|sigfig=3|abbr=on}}}}
| safetyvalvetype =
| feedwaterheater = {{ubl|HP: Knorr|LP: ACFI}}
| totalsurface = {{convert|159.5|m2|abbr=on}}
| tubearea = {{convert|115.2|m2|abbr=on}}
| archarea =
| fluearea =
| tubesandflues =
| fireboxarea = {{convert|44.0|m2|abbr=on}}
| superheatertype =
| superheaterarea = {{convert|47.50|m2|abbr=on}}
| cylindercount = 6 three-cylinder motors
| cylindersize = {{convert|150|x|255|mm|in|frac=16}}
| valvegear =
| valvetype =
| valvetravel =
| valvelap =
| valvelead =
| transmission =
| trainheating =
| locobrakes =
| locobrakeforce =
| trainbrakes =
| safety =
| coupling =
| maxspeed = {{convert|140|km/h|mph|0|abbr=on}}
| poweroutput = {{convert|2500|CV|kW hp|abbr=on|sigfig=3}}
| tractiveeffort = {{convert|17000|kgf|kN lbf|abbr=on|sigfig=3}}
| factorofadhesion =
| operator = SNCF
| operatorclass = SNCF: 232.P
| powerclass =
| numinclass =
| fleetnumbers = SNCF: 232.P.1
| officialname =
| nicknames =
| axleloadclass =
| locale =
| deliverydate =
| firstrundate =
| lastrundate =
| retiredate =
| withdrawndate = 1949
| preservedunits =
| restoredate =
| scrapdate =
| currentowner =
| disposition = Scrapped
| notes =
}}

SNCF 232.P.1 was an experimental prototype high-pressure steam locomotive ordered by the Chemins de fer du Nord, but delivered to the Société nationale des chemins de fer français (SNCF) in 1939. It was the first and only member of SNCF's first class of 4-6-4 or Hudson type of locomotives.

Origins

The locomotive was ordered by on 9 March 1936 by the Chemins de fer du Nord in an attempt to improve on the power output and fuel consumption of the conventional steam locomotive.

The project involved three of the French big-four locomotive manufacturers: Société alsacienne de constructions méchaniques (SACM); Fives-Lille; and Schneider et Cie. It also received assistance from the Swiss Locomotive and Machine Works (SLM) of Winterthur.

Description

It was decided to fit the locomotive with a high-pressure boiler and multiple small steam motors to drive each axle

The boiler was in two parts: the main, rear part, was a water tube boiler pressed to {{convert|60|kgf/cm2|MPa psi|sigfig=3|abbr=on}} (a conventional boiler was limited to {{convert|25|kgf/cm2|MPa psi|sigfig=3|abbr=on|disp=or}}). The forward part was a conventional fire-tube boiler pressed to {{convert|20|kgf/cm2|MPa psi|sigfig=3|abbr=on}} and served as a feed-water heater.

There were six, three-cylinder, {{convert|500|CV|kW hp|adj=on}} steam motors, which were attached, two per axle, to the driving axles by gearing. They had a maximum rotational speed of 1000 rpm, which would give the locomotive a theoretical maximum speed of {{convert|148|km/h|mph|0|abbr=on}}. The small motors were less bulky, had a higher power-weight ratio and were more efficient. Their use eliminated the need for a crank axle, and enable the use of small diameter driving wheels of {{convert|1550|mm|ftin|frac=4|abbr=on}}, and shortened the length of the locomotive

The Direction du Matériel et de la Traction (service MT) (Rolling Stock and Traction Department) believed that the small motors could easily be disconnected and would not immobilise the locomotive.

Due to the absence of connecting rods, the locomotive had outside frames and an integral fairing.

Service history

The locomotive left the Graffenstaden works of SACM in the early days of 1939 and testing started immediately. However, the outbreak of World War II quickly interrupted these tests; the locomotive was sent to workshops at Oullins where it went into storage. The tests resumed in 1943, and after a presentation at the Oullins Workshops in 1946 and a series of measurements taken on the Vitry-sur-Seine test plant in 1947, the locomotive went back into store. Placed awaiting authorisation for retirement in 1948, it was finally withdrawn in 1949.

Conclusion

The design had to answer the desire to increase the efficiency or reduce the consumption for the same power. However, the delay caused by the World War II, the fact that the boiler was more complex, and the difficulty of maintaining the main boiler at very high pressure made the gains obtained, viz., fuel economy in the order of 30%, meant that the design had no impact on future steam locomotives.

Tender

The tender which was attached to the locomotive was one of the bogie tenders of type 36.B which held {{convert|36000|l|}} of water and {{convert|9|t}} of coal (in this case 36.B.9).

References

  • {{Davies-SNCFLocoList}}
  • {{cite book|last=Constant|first=Olivier |title=Encyclopédie du matérial moteur SNCF, Tome 2: Les locomotive à vapeur depuis 1938 |location = Betschdorf |publisher=Editions Publitrains eurl |issn=1267-5008 |language=French}}

9 : Steam locomotives of France|SNCF locomotives|4-6-4 locomotives|High-pressure steam locomotives|SACM locomotives|Railway locomotives introduced in 1939|Individual locomotives of France|Standard gauge locomotives of France|Scrapped locomotives

随便看

 

开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。

 

Copyright © 2023 OENC.NET All Rights Reserved
京ICP备2021023879号 更新时间:2024/11/10 20:22:55