1. Design

2. Variants

3. Specifications

4. Notes

5. References

The Fokker V.1 was a small German sesquiplane experimental fighter prototype built in 1916 by the Fokker-Flugzeugwerke. Sporting a parasol wing, it was the first Fokker aircraft purportedly designed by Reinhold Platz—the respective roles played by Fokker himself, Platz, and possibly others in the conceptual design of Fokker airplanes are a matter of dispute among historians—and was an early experiment in cantilever wing construction, eliminating the bracing wires typical of aircraft design at the time, something that had already been achieved with metal materials in Hugo Junkers' own pioneering Junkers J 1 in 1915.

Design

The Fokker V.1 principal innovation was its unbraced cantilever wings. These were built around a pair of wooden box-girders, the upper and lower members of which were built up from several thin strips of pine, with connecting webs of birch plywood. The entire wing was covered in plywood, an innovation probably suggested to Fokker by a Swedish aeronautical engineer, Villehad Forssman, who had previously designed one of Germany's earliest multi-engined military aircraft; the V.1 upper wing's smooth surface, thick airfoil and tapered planform gave it a remarkably modern appearance. The depth of spar needed for adequate strength necessitated a wing whose root thickness was around 20% of the chord, in contrast to a typical value of around 6% for aircraft of the period and 12 to 15% for modern aircraft of comparable performance. The spars of the upper wing were parallel but those of the lower wing converged to meet at the wingtips. The intention of this was to provide a well for the fitting of a retractable undercarriage at a later date. Ailerons were fitted to the upper wing only and these were unusual in that the entire wing-tip being a separate component, and was pivoted, much like the French Blériot VIII of 1908 had done, to provide a control surface. To further Platz's desire for an aerodynamically clean aircraft, all control actuators were buried within the wing, so that there were no drag-creating control horns. The upper wing was mounted on a system of cabane struts consisting of a pair of tubular steel tripods between the fuselage and mainspar and a pair of steel struts connected to the aft spar, all basically similar to the cabane strut design for the later, likewise Platz-designed Fokker D.VI and Fokker D.VII biplane descendents — each of which also used one "N-pattern" interplane strut set per side — and the Fokker D.VIII parasol-wing monoplane descendent of the V.1. Unlike the later D.VI and D.VII, there were no interplane struts on the outer areas of the V.1's wing panels. Since Platz was using a novel and thick aerofoil, much like the contemporary cantilever-winged Junkers J 1 all-metal monoplane pioneered nearly a year earlier, he was unsure about the correct incidence for the wing with respect to the fuselage. Lacking a wind tunnel, he therefore made it adjustable during flight.

The fuselage structure was the usual Fokker wire-braced rectangular section box girder made from welded steel tubes. This was then enclosed within circular wooden formers bearing longitudinal stringers and covered with fabric. The tail surfaces were all-moving, without a fixed fin or horizontal stabiliser. The aircraft was powered by a 75 kW (100 hp) Oberursel U.I rotary engine.

In the case of the V.1 the V did not stand for Versuchs (experimental), but for Verspannungslos (literally "without struts"), or cantilever. The aircraft was so small it was nicknamed "Floh" or flea, like a similarly small, DFW-built prototype airframe of the era.

Variants

It was Fokker's practice to develop rotary and inline engined variants of the company's designs. Accordingly, a second similar aircraft powered by a 120 hp (90 kW) Mercedes D.II was constructed, the Fokker V.2. The aircraft differed principally in having an increased wing area to compensate for the increased weight of the engine and Albatros D.III-outline shape open structure, fabric-covered conventional tail surfaces.

Specifications

|genhide=
|crew=1
|capacity=
|length m=
|length ft=18
|length in=6
|length note=
|span m=
|span ft=
|span in=
|span note=
|upper span m=
|upper span ft=26
|upper span in=3
|upper span note=
|mid span m=
|mid span ft=
|mid span in=
|mid span note=
|lower span m=
|lower span ft=18
|lower span in=3
|lower span note= (Linear dimensions scaled from drawing.)
|swept m=
|swept ft=
|swept in=
|swept note=
|dia m=
|dia ft=
|dia in=
|dia note=
|width m=
|width ft=
|width in=
|width note=
|height m=
|height ft=
|height in=
|height note=
|wing area sqm=
|wing area sqft=
|wing area note=
|swept area sqm=
|swept area sqft=
|swept area note=
|volume m3=
|volume ft3=
|volume note=
|aspect ratio=
|airfoil=
|empty weight kg=
|empty weight lb=
|empty weight note=
|gross weight kg=
|gross weight lb=
|gross weight note=
|max takeoff weight kg=
|max takeoff weight lb=
|max takeoff weight note=
|fuel capacity=
|lift kg=
|lift lb=
|lift note=
|more general=

|eng1 number=1
|eng1 name=Oberursel
|eng1 type=U.1
|eng1 kw=
|eng1 hp=100
|eng1 kn=
|eng1 lbf=
|eng1 note=
|power original=
|thrust original=
|eng1 kn-ab=
|eng1 lbf-ab=
|eng2 number=
|eng2 name=
|eng2 type=
|eng2 kw=
|eng2 hp=
|eng2 kn=
|eng2 lbf=
|eng2 note=
|eng2 kn-ab=
|eng2 lbf-ab=
|eng3 number=
|eng3 name=
|eng3 type=
|eng3 kw=
|eng3 hp=
|eng3 kn=
|eng3 lbf=
|eng3 note=
|eng3 kn-ab=
|eng3 lbf-ab=
|more power=
|prop blade number=
|prop name=
|prop dia m=
|prop dia ft=
|prop dia in=
|prop note=

|perfhide=
|max speed kmh=
|max speed mph=
|max speed kts=
|max speed note=
|max speed mach=
|cruise speed kmh=
|cruise speed mph=
|cruise speed kts=
|cruise speed note=
|stall speed kmh=
|stall speed mph=
|stall speed kts=
|stall speed note=
|never exceed speed kmh=
|never exceed speed mph=
|never exceed speed kts=
|never exceed speed note=
|minimum control speed kmh=
|minimum control speed mph=
|minimum control speed kts=
|minimum control speed note=
|range km=
|range miles=
|range nmi=
|range note=
|combat range km=
|combat range miles=
|combat range nmi=
|combat range note=
|ferry range km=
|ferry range miles=
|ferry range nmi=
|ferry range note=
|endurance=
|ceiling m=
|ceiling ft=
|ceiling note=
|climb rate ms=
|climb rate ftmin=
|climb rate note=
|time to altitude=
|lift to drag=
|wing loading kg/m2
|wing loading lb/sqft=
|wing loading note=
|power/mass=
|thrust/weight=
|more performance=

|armament

• 2x Spandau machine guns

Notes

References

• Weyl, A.J. Fokker: The Creative Years. London: Putnam, 1965.

• Patrol Base Diamond I
• Patrol Base Frontier City
• Patrol base Shamshad
• Patrol Box
• Patrol duties
• Patrol duty
• Patroli
• Patrol leader
• Patrolled By Radar
• Patrol-man
• Patrol man
• Patrolman Henry Walburger
• Patrolman Walburger
• Patrol men
• Patrol-men
• Patrol Mortar
• Patrol (novel)
• Patrologiae Cursus Completus
• Patrologiae cursus completus
• Patrol scrub
• Patrol scrubbing
• Patrol Ship Multi-Mission
• Patrol Squadron 16
• Patrol Squadron 9
• Patrol Squadron 92