词条 | Infection control | ||||||||||||||||
释义 |
Infection control addresses factors related to the spread of infections within the healthcare setting (whether patient-to-patient, from patients to staff and from staff to patients, or among-staff), including prevention (via hand hygiene/hand washing, cleaning/disinfection/sterilization, vaccination, surveillance), monitoring/investigation of demonstrated or suspected spread of infection within a particular health-care setting (surveillance and outbreak investigation), and management (interruption of outbreaks). It is on this basis that the common title being adopted within health care is "infection prevention and control." Infection control in healthcare facilitiesAseptic technique is a key component of all invasive medical procedures. Similarly, infection control measures are most effective when Standard Precautions (health care) are applied because undiagnosed infection is common.[2]Hand hygieneIndependent studies by Ignaz Semmelweis in 1846 in Vienna and Oliver Wendell Holmes, Sr. in 1843 in Boston established a link between the hands of health care workers and the spread of hospital-acquired disease.[3] The U.S. Centers for Disease Control and Prevention (CDC) state that “It is well documented that the most important measure for preventing the spread of pathogens is effective handwashing.”[4] In the developed world, hand washing is mandatory in most health care settings and required by many different regulators.{{citation needed|date=September 2014}} In the United States, OSHA standards[5] require that employers must provide readily accessible hand washing facilities, and must ensure that employees wash hands and any other skin with soap and water or flush mucous membranes with water as soon as feasible after contact with blood or other potentially infectious materials (OPIM). In the UK healthcare professionals have adopted the 'Ayliffe Technique', based on the 6 step method developed by Graham Ayliffe, JR Babb and AH Quoraishi.[6]
Drying is an essential part of the hand hygiene process. In November 2008, a non-peer-reviewed[7] study was presented to the European Tissue Symposium by the University of Westminster, London, comparing the bacteria levels present after the use of paper towels, warm air hand dryers, and modern jet-air hand dryers.[8] Of those three methods, only paper towels reduced the total number of bacteria on hands, with "through-air dried" towels the most effective. The presenters also carried out tests to establish whether there was the potential for cross-contamination of other washroom users and the washroom environment as a result of each type of drying method. They found that:
In 2005, in a study conducted by TUV Produkt und Umwelt, different hand drying methods were evaluated.[9] The following changes in the bacterial count after drying the hands were observed:
SterilizationSterilization is a process intended to kill all microorganisms and is the highest level of microbial kill that is possible. Sterilizers may be heat only, steam, or liquid chemical.[10] Effectiveness of the sterilizer (e.g., a steam autoclave) is determined in three ways.[10] First, mechanical indicators and gauges on the machine itself indicate proper operation of the machine. Second heat sensitive indicators or tape on the sterilizing bags change color which indicate proper levels of heat or steam. And, third (most importantly) is biological testing in which a microorganism that is highly heat and chemical resistant (often the bacterial endospore) is selected as the standard challenge. If the process kills this microorganism, the sterilizer is considered to be effective.[10] Sterilization, if performed properly, is an effective way of preventing bacteria from spreading. It should be used for the cleaning of the medical instruments or gloves, and basically any type of medical item that comes into contact with the blood stream and sterile tissues. There are four main ways in which such items can be sterilized: autoclave (by using high-pressure steam), dry heat (in an oven), by using chemical sterilants such as glutaraldehydes or formaldehyde solutions or by radiation (with the help of physical agents). The first two are the most used methods of sterilizations mainly because of their accessibility and availability. Steam sterilization is one of the most effective types of sterilizations, if done correctly which is often hard to achieve. Instruments that are used in health care facilities are usually sterilized with this method. The general rule in this case is that in order to perform an effective sterilization, the steam must get into contact with all the surfaces that are meant to be disinfected. On the other hand, dry heat sterilization, which is performed with the help of an oven, is also an accessible type of sterilization, although it can only be used to disinfect instruments that are made of metal or glass. The very high temperatures needed to perform sterilization in this way are able to melt the instruments that are not made of glass or metal. Steam sterilization is done at a temperature of 121 C (250 F) with a pressure of 209 kPa (15 lbs/in2). In these conditions, rubber items must be sterilized for 20 minutes, and wrapped items 134 C with pressure of 310 kPa for 7 minutes. The time is counted once the temperature that is needed has been reached. Steam sterilization requires four conditions in order to be efficient: adequate contact, sufficiently high temperature, correct time and sufficient moisture.[11] Sterilization using steam can also be done at a temperature of 132 C (270 F), at a double pressure. Dry heat sterilization is performed at 170 C (340 F) for one hour or two hours at a temperature of 160 C (320 F). Dry heat sterilization can also be performed at 121 C, for at least 16 hours.[12] Chemical sterilization, also referred to as cold sterilization, can be used to sterilize instruments that cannot normally be disinfected through the other two processes described above. The items sterilized with cold sterilization are usually those that can be damaged by regular sterilization. Commonly, glutaraldehydes and formaldehyde are used in this process, but in different ways. When using the first type of disinfectant, the instruments are soaked in a 2-4% solution for at least 10 hours while a solution of 8% formaldehyde will sterilize the items in 24 hours or more. Chemical sterilization is generally more expensive than steam sterilization and therefore it is used for instruments that cannot be disinfected otherwise. After the instruments have been soaked in the chemical solutions, they are mandatory to be rinsed with sterile water which will remove the residues from the disinfectants. This is the reason why needles and syringes are not sterilized in this way, as the residues left by the chemical solution that has been used to disinfect them cannot be washed off with water and they may interfere with the administered treatment. Although formaldehyde is less expensive than glutaraldehydes, it is also more irritating to the eyes, skin and respiratory tract and is classified as a potential carcinogen.[11] Other sterilization methods exist, though their efficiency is still controversial. These methods include gas, UV, gas plasma, and chemical sterilization with agents such as peroxyacetic acid or paraformaldehyde. CleaningInfections can be prevented from occurring in homes as well. In order to reduce their chances to contract an infection, individuals are recommended to maintain a good hygiene by washing their hands after every contact with questionable areas or bodily fluids and by disposing of garbage at regular intervals to prevent germs from growing.[13] DisinfectionDisinfection uses liquid chemicals on surfaces and at room temperature to kill disease causing microorganisms. Ultraviolet light has also been used to disinfect the rooms of patients infected with Clostridium difficile after discharge.[14] Disinfection is less effective than sterilization because it does not kill bacterial endospores.[10] Personal protective equipmentPersonal protective equipment (PPE) is specialized clothing or equipment worn by a worker for protection against a hazard. The hazard in a health care setting is exposure to blood, saliva, or other bodily fluids or aerosols that may carry infectious materials such as Hepatitis C, HIV, or other blood borne or bodily fluid pathogen. PPE prevents contact with a potentially infectious material by creating a physical barrier between the potential infectious material and the healthcare worker. The United States Occupational Safety and Health Administration (OSHA) requires the use of Personal protective equipment (PPE) by workers to guard against blood borne pathogens if there is a reasonably anticipated exposure to blood or other potentially infectious materials.[15] Components of PPE include gloves, gowns, bonnets, shoe covers, face shields, CPR masks, goggles, surgical masks, and respirators. How many components are used and how the components are used is often determined by regulations or the infection control protocol of the facility in question. Many or most of these items are disposable to avoid carrying infectious materials from one patient to another patient and to avoid difficult or costly disinfection. In the US, OSHA requires the immediate removal and disinfection or disposal of a worker's PPE prior to leaving the work area where exposure to infectious material took place.[16] The inappropriate use of PPE equipment such as gloves, has been linked to an increase in rates of the transmission of infection,[17] and the use of such must be compatible with the other particular hand hygiene agents used.[18] Antimicrobial surfacesMicroorganisms are known to survive on non-antimicrobial in animate ‘touch’ surfaces (e.g., bedrails, over-the-bed trays, call buttons, bathroom hardware, etc.) for extended periods of time.[19][20] This can be especially troublesome in hospital environments where patients with immunodeficiencies are at enhanced risk for contracting nosocomial infections. {{main|Antimicrobial copper-alloy touch surfaces}}Products made with antimicrobial copper alloy (brasses, bronzes, cupronickel, copper-nickel-zinc, and others) surfaces destroy a wide range of microorganisms in a short period of time.[21] The United States Environmental Protection Agency has approved the registration of 355 different antimicrobial copper alloys and one synthetic copper-infused hard surface that kill E. coli O157:H7, methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus, Enterobacter aerogenes, and Pseudomonas aeruginosa in less than 2 hours of contact. Other investigations have demonstrated the efficacy of antimicrobial copper alloys to destroy Clostridium difficile, influenza A virus, adenovirus, and fungi.[21] As a public hygienic measure in addition to regular cleaning, antimicrobial copper alloys are being installed in healthcare facilities in the U.K., Ireland, Japan, Korea, France, Denmark, and Brazil. The synthetic hard surface is being installed in the United States as well as in Israel.[22]Vaccination of health care workersHealth care workers may be exposed to certain infections in the course of their work. Vaccines are available to provide some protection to workers in a healthcare setting. Depending on regulation, recommendation, the specific work function, or personal preference, healthcare workers or first responders may receive vaccinations for hepatitis B; influenza; measles, mumps and rubella; Tetanus, diphtheria, pertussis; N. meningitidis; and varicella.[23] Surveillance for infections{{main|Disease surveillance}}Surveillance is the act of infection investigation using the CDC definitions. Determining the presence of a hospital acquired infection requires an infection control practitioner (ICP) to review a patient's chart and see if the patient had the signs and symptom of an infection. Surveillance definitions exist for infections of the bloodstream, urinary tract, pneumonia, surgical sites and gastroenteritis. Surveillance traditionally involved significant manual data assessment and entry in order to assess preventative actions such as isolation of patients with an infectious disease. Increasingly, computerized software solutions are becoming available that assess incoming risk messages from microbiology and other online sources. By reducing the need for data entry, software can reduce the data workload of ICPs, freeing them to concentrate on clinical surveillance. As of 1998, approximately one third of healthcare acquired infections were preventable.[24] Surveillance and preventative activities are increasingly a priority for hospital staff. The Study on the Efficacy of Nosocomial Infection Control (SENIC) project by the U.S. CDC found in the 1970s that hospitals reduced their nosocomial infection rates by approximately 32 per cent by focusing on surveillance activities and prevention efforts.[25] Isolation and quarantine{{main|Isolation (health care)}}In the health care context, medical isolation refers to various physical measures taken to interrupt nosocomial spread of contagious diseases. Various forms of isolation exist, and are applied depending on the type of infection and agent involved, to address the likelihood of spread via airborne particles or droplets, by direct skin contact, or via contact with body fluids. In cases where infection is merely suspected, individuals may be quarantined until the incubation period has passed and the disease manifests itself or the person remains healthy. Groups may undergo quarantine, or in the case of communities, a cordon sanitaire may be imposed to prevent infection from spreading beyond the community, or in the case of protective sequestration, into a community. Public health authorities may implement other forms of social distancing, such as school closings, to control an epidemic.[26] Outbreak investigationWhen an unusual cluster of illness is noted, infection control teams undertake an investigation to determine whether there is a true outbreak, a pseudo-outbreak (a result of contamination within the diagnostic testing process), or just random fluctuation in the frequency of illness. If a true outbreak is discovered, infection control practitioners try to determine what permitted the outbreak to occur, and to rearrange the conditions to prevent ongoing propagation of the infection. Often, breaches in good practice are responsible, although sometimes other factors (such as construction) may be the source of the problem. Outbreaks investigations have more than a single purpose. These investigations are carried out in order to prevent additional cases in the current outbreak, prevent future outbreaks, learn about a new disease or learn something new about an old disease. Reassuring the public, minimizing the economic and social disruption as well as teaching epidemiology are some other obvious objectives of outbreak investigations.[27] According to the WHO, outbreak investigations are meant to detect what is causing the outbreak, how the pathogenic agent is transmitted, where it all started from, what is the carrier, what is the population at risk of getting infected and what are the risk factors. The results of outbreak investigations are always made public in the means of a report in which the findings are communicated to the authorities, media, scientific community and so on. These reports are commonly used as pedagogical tools. Training in infection control and health care epidemiologyPractitioners can come from several different educational streams. Many begin as nurses, some as medical technologists (particularly in clinical microbiology), and some as physicians (typically infectious disease specialists). Specialized training in infection control and health care epidemiology are offered by the professional organizations described below. Physicians who desire to become infection control practitioners often are trained in the context of an infectious disease fellowship. In the United States, Certification Board of Infection Control and Epidemiology is a private company that certifies infection control practitioners based on their educational background and professional experience, in conjunction with testing their knowledge base with standardized exams. The credential awarded is CIC, Certification in Infection Control and Epidemiology. It is recommended that one has 2 years of Infection Control experience before applying for the exam. Certification must be renewed every five years.[28] A course in hospital epidemiology (infection control in the hospital setting) is offered jointly each year by the Centers for Disease Control and Prevention (CDC) and the Society for Healthcare Epidemiology of America.[29] StandardizationAustraliaIn 2002, the Royal Australian College of General Practitioners published a revised standard for office-based infection control which covers the sections of managing immunisation, sterilisation and disease surveillance.[30][31] However, the document on the personal hygiene of health workers is only limited to hand hygiene, waste and linen management, which may not be sufficient since some of the pathogens are air-born and could be spread through air flow.[32][33] United StatesCurrently, the federal regulation that describes infection control standards is found at 29 CFR Part 1910.1030 Bloodborne pathogens.[34] See also
Footnotes1. ^{{cite web | url =https://www.drugs.com/drug-class/anti-infectives.html|title=Anti-infectives|publisher=Drugs.com| accessdate =27 July 2015}} 2. ^{{cite book|last1=Korniewicz, Ph.D, RN, FAAN|first1=Denise M.|title=Infection Control for Advanced Practice Professionals|date=1 January 2014|publisher=DEStech Publications, Inc|location=Lancaster PA|isbn=978-1-60595-060-0|pages=264|edition=1st|url=http://www.destechpub.com/links/catalogs/bookstore/nursing-and-health-science-4/infection-control-for-advanced-practice-professionals/|accessdate=6 February 2015}} 3. ^{{cite journal |url=https://www.cdc.gov/mmwr/preview/mmwrhtml/rr5116a1.htm |journal=MMWR |title=CDC Guideline for Hand Hygiene in Health-Care Settings}} 4. ^{{cite web |url=https://www.cdc.gov/nceh/vsp/cruiselines/hand_hygiene_general.htm |publisher=CDC |title=General information on Hand Hygiene}} 5. ^{{cite web |url=https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10051 |title=Bloodborne Pathogens Regulations 1910.1030 |publisher=Occupational Safety and Health Administration }} 6. ^{{cite web|title=Policy for Hand Hygiene Infection Prevention and Control Policy No. 2|url=http://www.wirralct.nhs.uk/attachments/article/25/IPC2Handhygienepolicyv2020812.pdf|website=Wirral.nhs.uk|accessdate=3 March 2016}} 7. ^According to p. 35 of the Redway/Fawdar presentation, "Note: this study has not been peer reviewed but it is intended that the test methods described in this document are provided in sufficient detail to allowreplication by those who wish to confirm the results." 8. ^{{cite web| url=http://www.europeantissue.com/pdfs/090402-2008%20WUS%20Westminster%20University%20hygiene%20study,%20nov2008.pdf | work=Table 4| page=13 | title=A comparative study of three different hand drying methods: paper towel, warm air dryer, jet air dryer’| author=Keith Redway and Shameem Fawdar (School of Biosciences, University of Westminster London) |date=November 2008| publisher=European Tissue Symposium|accessdate=2009-10-31}} 9. ^{{cite web |publisher=TÜV Produkt und Umwelt |url=http://www.europeantissue.com/pdfs/090410%20T%C3%9CV%20-%20Study%20of%20different%20methods%20used%20for%20drying%20hands%20Sept%202005.pdf |title=Report No. 425-452006 concerning a study conducted with regard to the different methods used for drying hands |date=September 2005}} 10. ^1 2 3 {{cite book |author=Miller, Chris H. |title=Infection control and management of hazardous materials for the dental team |edition=4th |publisher=Mosby Elsevier Health Science |year=2010 |chapter=11 }} 11. ^1 {{cite web |url=http://www.reproline.jhu.edu/english/4morerh/4ip/IP_manual/11_Sterilization.pdf |title=Sterilization |date= |accessdate=27 July 2010 }} 12. ^{{cite web |url=http://www.mansfield.ohio-state.edu/~sabedon/black12.htm |title=Eliminating microbes |date= |accessdate=27 July 2010 |deadurl=yes |archiveurl=https://web.archive.org/web/20100724144955/http://www.mansfield.ohio-state.edu/~sabedon/black12.htm |archivedate=24 July 2010 |df=dmy-all }} 13. ^{{cite web |url=http://www.preventinginfection.com/ |title=Preventing infections adequately |date= |accessdate=27 July 2010 }} 14. ^{{cite web |publisher=Agency for Healthcare Research and Quality |url=https://innovations.ahrq.gov/profiles/performance-feedback-ultraviolet-cleaning-device-and-dedicated-housekeeping-team |title=Performance feedback, ultraviolet cleaning device, and dedicated housekeeping team significantly improve room cleaning, reduce potential for spread of common, dangerous infection |date=2014-01-15 | accessdate=2014-01-20}} 15. ^{{cite web |url=https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10051#1910.1030(d)(2)(i) |publisher=Occupational Safety and Health Administration |title=Bloodborne Pathogens Regulations |at=1910.1030(d)(2)(i)}} 16. ^{{cite web |url=https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10051#1910.1030(d)(2)(i) |publisher=Occupational Safety and Health Administration |title=Bloodborne Pathogens Regulations |at=1910.1030(d)(3)(vii)}} 17. ^https://www.nursingtimes.net/clinical-archive/infection-control/does-glove-use-increase-the-risk-of-infection/5074976.article 18. ^https://www.infectioncontroltoday.com/hand-hygiene/hand-hygiene-and-glove-issues 19. ^{{cite journal|author1=Wilks SA |author2=Michels H |author3=Keevil CW |year=2005 |title=The survival of Escherichia coli O157 on a range of metal surfaces |journal=International Journal of Food Microbiology |volume=105 |issue=3 |pages=445–454 |pmid=16253366 |doi=10.1016/j.ijfoodmicro.2005.04.021 }} 20. ^{{cite journal |author=Michels HT |title=Anti-microbial characteristics of copper |journal=ASTM Standardization News |date=October 2006 |pages=28–31}} 21. ^1 {{cite web|url=http://coppertouchsurfaces.org/antimicrobial/bacteria/index.html |title=Copper touch surfaces |publisher=coppertouchsurfaces.org}}{{medrs|date=September 2014}} 22. ^{{cite news |url=http://insidebiz.com/news/sentara-leighs-new-copper-infused-surfaces-kill-bacteria-said-be-worlds-largest-clinical-trial |work=Inside Business |title=Sentara Leigh's new copper-infused surfaces that kill bacteria said to be world's largest clinical trial |date=6 December 2013 }} 23. ^[https://www.cdc.gov/node.do/id/0900f3ec8005df1f CDC Vaccine Site] 24. ^{{cite journal |url=http://wwwnc.cdc.gov/eid/article/4/3/98-0320 |publisher=CDC |journal=Emerging Infectious Diseases |volume=4 |issue=3 |date=September 1998 |author=Weinstein RA |title=Nosocomial Infection Update | doi = 10.3201/eid0403.980320 |pages=416–420}} 25. ^{{cite journal |url=http://wwwnc.cdc.gov/eid/article/7/2/pdfs/70-0170.pdf |publisher=CDC |journal=Emerging Infectious Diseases |volume=7 |issue=2 |title=Infection Control and Changing Health-Care Delivery Systems |author=Jarvis WR |date=March–April 2001 |pmid=11294699|doi=10.3201/eid0702.700170 |pages=170–3 |pmc=2631740}} 26. ^[https://www.cdc.gov/od/science/integrity/phethics/docs/panflu_ethic_guidelines.pdf Kathy Kinlaw, Robert Levine, "Ethical Guidelines on Pandemic Influenza," CDC, December 2006] 27. ^{{cite web|url=http://www.idready.org/slides/03outbreak-slides.pdf|title=Conducting an Outbreak Investigation|date=|accessdate=2010-07-27|deadurl=yes|archiveurl=https://web.archive.org/web/20100331173846/http://www.idready.org/slides/03outbreak-slides.pdf|archivedate=31 March 2010|df=dmy-all}} 28. ^{{cite web |url=http://www.cbic.org/about-cbic |publisher=Certification Board of Infection Control and Epidemiology |title=About CBIC }} (official site) 29. ^{{cite web |url=http://www.shea-online.org/Education.aspx |title=Education |publisher=Society for Healthcare Epidemiology of America |deadurl=yes |archiveurl=https://web.archive.org/web/20110712131147/http://www.shea-online.org/Education.aspx |archivedate=12 July 2011 |df=dmy-all }} (official site) 30. ^{{cite web| last =The Royal Australian College of General Practitioners| first =| authorlink =| coauthors =| title =RACGP Infection Control Standards for Office-based Practices (4th Edition)| work =| publisher =| date =| url =http://www.racgp.org.au/infectioncontrol| format =| doi =| accessdate =8 November 2008| deadurl =yes| archiveurl =https://web.archive.org/web/20081220163900/http://www.racgp.org.au/infectioncontrol| archivedate =20 December 2008| df =dmy-all}} 31. ^{{cite web| last =The Royal Australian College of General Practitioners| first =| authorlink =| coauthors =| title =Slides - RACGP Infection Control Standards for Office-based Practices (4th Edition)| work =| publisher =| date =| url =http://www.racgp.org.au/Content/NavigationMenu/PracticeSupport/StandardsforGeneralPractices/200708RACGP_Infection_Control_Standards.pdf| format =PDF| doi =| accessdate =8 November 2008| deadurl =yes| archiveurl =https://web.archive.org/web/20081217113407/http://www.racgp.org.au/Content/NavigationMenu/PracticeSupport/StandardsforGeneralPractices/200708RACGP_Infection_Control_Standards.pdf| archivedate =17 December 2008| df =dmy-all}} 32. ^{{cite web | last = Dix | first = Kathy | authorlink = | coauthors = | title = Airborne Pathogens in Healthcare Facilities | work = | publisher = | date = | url = http://www.infectioncontroltoday.com/articles/581clinical.html | doi = | accessdate = 11 December 2008 }} 33. ^{{cite journal | last = Nicas | first = Mark | authorlink = | coauthors = | title = Toward Understanding the Risk of Secondary Airborne Infection: Emission of Respirable Pathogens | journal = Journal of Occupational and Environmental Hygiene | volume = 2 | issue = 3 | pages = 143–154 | publisher = | location = | year = 2005 | url = | doi = 10.1080/15459620590918466 | id = | pmid = 15764538 | last2 = Nazaroff | first2 = WW | last3 = Hubbard | first3 = A | displayauthors = 1 }} 34. ^{{cite web |publisher=U.S. Occupational Safety and Health Administration |url=https://www.osha.gov/pls/oshaweb/owalink.query_links?src_doc_type=STANDARDS&src_unique_file=1910_1030&src_anchor_name=1910.1030 |title=Bloodborne pathogens |at=1910.1030 }}
External links
3 : Epidemiology|Medical hygiene|Infectious diseases |
||||||||||||||||
随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。