“Natural-gas processing”的意思、由来-开放百科全书

Natural-gas processing begins at the well head. The composition of the raw natural gas extracted from producing wells depends on the type, depth, and location of the underground deposit and the geology of the area. Oil and natural gas are often found together in the same reservoir. The natural gas produced from oil wells is generally classified as associated-dissolved, meaning that the natural gas is associated with or dissolved in crude oil. Natural gas production absent any association with crude oil is classified as “non-associated.” In 2009, 89 percent of U.S. wellhead production of natural gas was non-associated.^[2]

Natural-gas processing plants purify raw natural gas by removing common contaminants such as water, carbon dioxide (CO₂) and hydrogen sulfide (H₂S). Some of the substances which contaminate natural gas have economic value and are further processed or sold. A fully operational plant delivers pipeline-quality dry natural gas that can be used as fuel by residential, commercial and industrial consumers.

Types of raw-natural-gas wells

Raw natural gas comes primarily from any one of three types of wells: crude oil wells, gas wells, and condensate wells.

Natural gas that comes from crude oil wells is typically called associated gas. This gas can have existed as a gas cap above the crude oil in the underground formation, or could have been dissolved in the crude oil.

Natural gas from gas wells and from condensate wells, in which there is little or no crude oil, is called non-associated gas. Gas wells typically produce only raw natural gas, while condensate wells produce raw natural gas along with other low molecular weight hydrocarbons. Those that are liquid at ambient conditions (i.e., pentane and heavier) are called natural-gas condensate (sometimes also called natural gasoline or simply condensate).

Natural gas is called sweet gas when relatively free of hydrogen sulfide; gas that does contain hydrogen sulfide is called sour gas. Natural gas, or any other gas mixture, containing significant quantities of hydrogen sulfide, carbon dioxide or similar acidic gases, is called acid gas.

Raw natural gas can also come from methane deposits in the pores of coal seams, and especially in a more concentrated state of adsorption onto the surface of the coal itself. Such gas is referred to as coalbed gas or coalbed methane (coal seam gas in Australia). Coalbed gas has become an important source of energy in recent decades.

Contaminants in raw natural gas

Raw natural gas typically consists primarily of methane (CH₄), the shortest and lightest hydrocarbon molecule. It also contains varying amounts of:

The raw natural gas must be purified to meet the quality standards specified by the major pipeline transmission and distribution companies. Those quality standards vary from pipeline to pipeline and are usually a function of a pipeline system's design and the markets that it serves. In general, the standards specify that the natural gas:

Description of a natural-gas processing plant

There are a great many ways in which to configure the various unit processes used in the processing of raw natural gas. The block flow diagram below is a generalized, typical configuration for the processing of raw natural gas from non-associated gas wells. It shows how raw natural gas is processed into sales gas pipelined to the end user markets.^[8]^[9]^[10]^[11]^[12] It also shows how processing of the raw natural gas yields these byproducts:

Raw natural gas is commonly collected from a group of adjacent wells and is first processed at that collection point for removal of free liquid water and natural gas condensate. The condensate is usually then transported to an oil refinery and the water is disposed of as wastewater.

The raw gas is then pipelined to a gas processing plant where the initial purification is usually the removal of acid gases (hydrogen sulfide and carbon dioxide). There are many processes that are available for that purpose as shown in the flow diagram, but amine treating is the process that was historically used. However, due to a range of performance and environmental constraints of the amine process, a newer technology based on the use of polymeric membranes to separate the carbon dioxide and hydrogen sulfide from the natural gas stream has gained increasing acceptance. Membranes are attractive since no reagents are consumed.^[16]

The acid gases, if present, are removed by membrane or amine treating can then be routed into a sulfur recovery unit which converts the hydrogen sulfide in the acid gas into either elemental sulfur or sulfuric acid. Of the processes available for these conversions, the Claus process is by far the most well known for recovering elemental sulfur, whereas the conventional Contact process and the WSA (Wet sulfuric acid process) are the most used technologies for recovering sulfuric acid.

The residual gas from the Claus process is commonly called tail gas and that gas is then processed in a tail gas treating unit (TGTU) to recover and recycle residual sulfur-containing compounds back into the Claus unit. Again, as shown in the flow diagram, there are a number of processes available for treating the Claus unit tail gas and for that purpose a WSA process is also very suitable since it can work autothermally on tail gases.

The next step in the gas processing plant is to remove water vapor from the gas using either the regenerable absorption in liquid triethylene glycol (TEG),^[5] commonly referred to as glycol dehydration, deliquescent chloride desiccants, and or a Pressure Swing Adsorption (PSA) unit which is regenerable adsorption using a solid adsorbent.^[17] Other newer processes like membranes may also be considered.

Mercury is then removed by using adsorption processes (as shown in the flow diagram) such as activated carbon or regenerable molecular sieves.^[3]

Although not common, nitrogen is sometimes removed and rejected using one of the three processes indicated on the flow diagram:

The next step is to recover the natural gas liquids (NGL) for which most large, modern gas processing plants use another cryogenic low temperature distillation process involving expansion of the gas through a turbo-expander followed by distillation in a demethanizing fractionating column.^[21]^[22] Some gas processing plants use lean oil absorption process^[19] rather than the cryogenic turbo-expander process.

The recovered NGL stream is sometimes processed through a fractionation train consisting of three distillation towers in series: a deethanizer, a depropanizer and a debutanizer. The overhead product from the deethanizer is ethane and the bottoms are fed to the depropanizer. The overhead product from the depropanizer is propane and the bottoms are fed to the debutanizer. The overhead product from the debutanizer is a mixture of normal and iso-butane, and the bottoms product is a C₅+ mixture. The recovered streams of propane, butanes and C₅+ may be "sweetened" in a Merox process unit to convert undesirable mercaptans into disulfides and, along with the recovered ethane, are the final NGL by-products from the gas processing plant. Currently, most cryogenic plants do not include fractionation for economic reasons, and the NGL stream is instead transported as a mixed product to standalone fractionation complexes located near refineries or chemical plants that use the components for feedstock. In case laying pipeline is not possible for geographical reason,or the distance between source and consumer exceed 3000 km, natural gas is then transported by ship as LNG (liquefied natural gas) and again converted into its gaseous state in the vicinity of the consumer.

The residue gas from the NGL recovery section is the final, purified sales gas which is pipelined to the end-user markets. Rules and agreements are made between buyer and seller regarding the quality of the gas. These usually specify the maximum allowable concentration of CO₂, H₂S and H₂O as well as requiring the gas to be commercially free from objectionable odours and materials, and dust or other solid or liquid matter, waxes, gums and gum forming constituents, which might damage or adversely affect operation of the buyers equipment. When an upset occurs on the treatment plant buyers can usually refuse to accept the gas, lower the flow rate or re-negotiate the price.

Helium recovery

If the gas has significant helium content, the helium may be recovered by fractional distillation. Natural gas may contain as much as 7% helium, and is the commercial source of the noble gas.^[23] For instance, the Hugoton Gas Field in Kansas and Oklahoma in the United States contains concentrations of helium from 0.3% to 1.9%, which is separated out as a valuable byproduct.^[24]

Consumption

Natural gas consumption patterns, across nations, vary based on access. Countries with large reserves tend to handle the raw-material natural gas more generously, while countries with scarce or lacking resources tend to be more economical. Despite the considerable findings, the predicted availability of the natural-gas reserves has hardly changed.

Applications of natural gas

See also

References

1. ^{{cite web|url=http://primis.phmsa.dot.gov/comm/FactSheets/FSNaturalGasProcessingPlants.htm|title=PHMSA: Stakeholder Communications - NG Processing Plants|author=|date=|website=primis.phmsa.dot.gov|accessdate=9 April 2018}}
2. ^https://mitei.mit.edu/system/files/NaturalGas_Chapter2_Supply.pdf
3. ^¹²{{cite web|url=http://www.uop.com/objects/87MercuryRemoval.pdf|title=Mercury Removal from Natural Gas and Liquids|publisher=UOP LLC|archiveurl=https://web.archive.org/web/20110101194809/http://www.uop.com/objects/87MercuryRemoval.pdf|archivedate=2011-01-01|deadurl=yes}}
4. ^Dehydration of Natural Gas {{webarchive|url=https://web.archive.org/web/20070224110924/http://www.ipt.ntnu.no/~jsg/undervisning/naturgass/parlaktuna/Chap7.pdf |date=2007-02-24 }} by Prof. Jon Steiner Gudmundsson, Norwegian University of Science and Technology
5. ^¹Glycol Dehydration (includes a flow diagram)
6. ^Desulfurization of and Mercury Removal From Natural Gas by Bourke, M.J. and Mazzoni, A.F., Laurance Reid Gas Conditioning Conference, Norman, Oklahoma, March 1989.
7. ^Using Gas Geochemistry to Assess Mercury Risk, OilTracers, 2006
8. ^Natural Gas Processing: The Crucial Link Between Natural Gas Production and Its Transportation to Market {{webarchive|url=https://web.archive.org/web/20110304003407/http://www.eia.doe.gov/pub/oil_gas/natural_gas/feature_articles/2006/ngprocess/ngprocess.pdf |date=2011-03-04 }}
9. ^Example Gas Plant {{webarchive|url=https://web.archive.org/web/20101201015907/http://uop.com/gasprocessing/6070.html |date=2010-12-01 }}
10. ^From Purification to Liquefaction Gas Processing {{webarchive|url=https://www.webcitation.org/5nhzCYCzS?url=http://www.axens.net/upload/presentations/fichier/axens_gpagcc_2004v2.pdf |date=2010-02-21 }}
11. ^{{cite web|url=http://www.spe.org/specma/binary/files/5804785Syn10682.pdf|title=Feed-Gas Treatment Design for the Pearl GTL Project|author=|date=|website=spe.org|accessdate=9 April 2018}}
12. ^Benefits'>of integrating NGL extraction and LNG liquefaction {{webarchive|url=https://web.archive.org/web/20130626080757/http://lnglicensing.conocophillips.com/EN/publications/documents/AICHELNGNGLIntegrationPaper.pdf |date=2013-06-26 }}
13. ^{{cite web|url=http://www.conocophillips.com/sustainable-development/Documents/SMID_213_Natural%20Gas%20Liquids.pdf|title=MSDS: Natural gas liquids|publisher=ConocoPhillips}}
14. ^{{cite web|url=http://www.eia.gov/todayinenergy/detail.php?id=5930|title=What are natural gas liquids and how are they used?|date=April 20, 2012|publisher=United States Energy Information Administration}}
15. ^{{cite web|url=http://setxind.com/energy-markets/guide-to-understanding-natural-gas-and-natural-gas-liquids/|title=Guide to Understanding Natural Gas and Natural Gas Liquids|publisher=STI Group|date=2014-02-19}}
16. ^Baker, R. W. "Future Directions of Membrane Gas Separation Technology" Ind. Eng. Chem. Res. 2002, volume 41, pages 1393-1411. {{DOI|10.1021/ie0108088}}
17. ^Molecular Sieves (includes a flow diagram of a PSA unit)
18. ^Gas Processes 2002, Hydrocarbon Processing, pages 84–86, May 2002 (schematic flow diagrams and descriptions of the Nitrogen Rejection and Nitrogen Removal processes)
19. ^¹Market-Driven Evolution of Gas Processing Technologies for NGLs Advanced Extraction Technology Inc. website page
20. ^AET Process Nitrogen Rejection Unit Advanced Extraction Technology Inc. website page
21. ^Cryogenic Turbo-Expander Process Advanced Extraction Technology Inc. website page
22. ^Gas Processes 2002, Hydrocarbon Processing, pages 83–84, May 2002 (schematic flow diagrams and descriptions of the NGL-Pro and NGL Recovery processes)
23. ^{{cite web| author = Winter, Mark| title = Helium: the essentials| publisher = University of Sheffield|year = 2008| url = http://www.webelements.com/helium/| accessdate = 2008-07-14}}
24. ^Dwight E. Ward and Arthur P. Pierce (1973) "Helium" in United States Mineral Resources, US Geological Survey, Professional Paper 820, p.285-290.