请输入您要查询的百科知识:

 

词条 Acorn Atom
释义

  1. Memory Map

  2. Specifications

  3. External links

{{no footnotes|date=February 2013}}{{Infobox information appliance
| name = Acorn Atom
| image = Acorn atom zx1.jpg
| caption = The Atom was Acorn's first computer to be aimed squarely at the home market.
| manufacturer = Acorn Computers
| type = Personal Computer
| releasedate = {{Start date and age|1980}}
| discontinued = {{End date|1983}}
| price = £120 (in kit form), £170 (assembled)
| connectivity =
| lifespan =
| unitssold =
| media = 100KB 5¼-inch floppy disks, Cassette tapes
| os =
| input = Keyboard
| camera =
| power = 8V, 1.5A unregulated DC, 5V regulated inside.
| cpu = MOS Technology 6502 clocked at 1MHz
| storage =
| memory = 2 KB RAM (expandable to 12 KB), 8 KB ROM (expandable to 12 KB)
| display = 64x64 (4 colors), 64x96 (4 colors), 128x96 (monochrome), 64x192 (4 colors), 128x192 (2 colors), 256x192 (monochrome)
| audio = 1 channel, integral loudspeaker
| service =
| dimensions = 381×241×64 mm
| weight =
| touchpad =
| predecessor = Acorn System 3
| successor = BBC Micro
| related =
}}

The Acorn Atom is a home computer made by Acorn Computers Ltd from 1980 to 1982, when it was replaced by the BBC Micro. The Micro began life as an upgrade to the Atom, originally known as the Proton.

The Atom was a progression of the MOS Technology 6502-based machines that the company had been making from 1979. The Atom was a cut-down Acorn System 3 without a disk drive but with an integral keyboard and cassette tape interface, sold in either kit or complete form. In 1980 it was priced between £120 in kit form, £170 ready assembled, to over £200 for the fully expanded version with 12 KB of RAM and the floating point extension ROM.

The minimum Atom had 2 KB of RAM and 8 KB of ROM, with the maximum specification machine having 12 KB of each. An additional floating point ROM was also available. The 12 KB of RAM was divided between 1 KB for the zero page, 5 KB available for programs, and 6 KB for the high resolution graphics. The zero page was used by the CPU for stack storage, by the OS, and by the Atom BASIC for storage of the 27 variables. If high resolution graphics were not required then 5½ KB of the upper memory could be used for program storage.

It had an MC6847 Video Display Generator (VDG) video chip, allowing for both text and graphics modes. It could be connected to a TV or modified to output to a video monitor. Basic video memory was 1 KB but could be expanded to 6 KB. Since the MC6847 could only output at 60 Hz, meaning that the video could not be resolved on a large proportion of European and Canadian TV sets, a 50 Hz PAL colour card was later made available, also for a Canadian-exclusive NTSC one as well. Six video modes were available, with resolutions from 64×64 in 4 colours, up to 256×192 in monochrome. At the time, 256×192 was considered to be high resolution.

It had built-in BASIC (Atom BASIC), a fast but idiosyncratic version, which included indirection operators (similar to PEEK and POKE) for bytes and words (of 4 bytes each). Assembly code could be included within a BASIC program, because the BASIC interpreter also contained an assembler for the 6502 assembly language which assembled the inline code during program execution and then executed it. This was a very unusual, but also very useful, function.

In late 1982, Acorn released an upgrade ROM chip for the Atom which allowed users to switch between Atom BASIC and the more advanced BASIC used by the BBC Micro. The upgrade was purely to the programming language; the Atom's graphics and sound capabilities remained unchanged, and hence, contrary to some pre-release beliefs, the BBC BASIC ROM did not allow Atom users to run commercial BBC Micro software, since nearly all of it took advantage of the BBC machine's much more advanced graphics and sound hardware. Commercial BBC Micro cassettes could not have been loaded anyway, as they ran at a transfer rate of 1200 baud and the Atom's cassette interface only supported 300 baud.

The manual for the Atom was called Atomic Theory and Practice and was written by David Johnson-Davies, subsequently Managing Director of Acornsoft. (The manual used the jargon 'pling' for exclamation mark, a term which may have originated at Acorn, and of which this may have been the first published usage.)

The Acorn LAN, Econet, was first configured on the Atom.

The case was designed by industrial designer Allen Boothroyd of Cambridge Product Design Ltd.

Memory Map

The following is the memory map for the Atom. Shaded areas indicate those present on the minimal system.

Hex AddressContentsAnnotations
0000Block Zero RAM 1 KB RAM
0400Teletext VDG RAM
0800VDG CRT Controller
0900
0A00Optional FDC
0A80
1000Peripherals space
2000Catalogue buffer
2200Sequential File buffers
2800Floating point variablesInternal RAM
5 KB max.
2900Extension Text space RAM
3C00Off-board Extension RAM
80008000-81FF for mode 0 (512 bytes text)Video and
BASIC RAM
6 KB max.
8000-83FF for mode 1 (1 KB graphics)
8000-85FF for mode 2 (1.5 KB graphics)
8000-8BFF for mode 3 (3 KB graphics)
8000-97FF for mode 4 (6 KB graphics)
9800
A000Optional Utility ROM
B000PPIA I/O Device
B800Optional VIA I/O Device for Printer Interface
C000ATOM BASIC Interpreter4 KB ROM
D000Optional Extension ROM
E000Optional Disk Operating System
F000Assembler4 KB ROM
Cassette Operating System

Specifications

  • CPU: MOS Technology 6502
  • Speed: 1 MHz
  • RAM: 2 KB, expandable to 12 KB
  • ROM: 8 KB, expandable to 12 KB with various Acorn and 3rd party ROMs
  • Sound: 1 channel, integral loudspeaker
  • Size: 381×241×64 mm
  • I/O Ports: Computer Users' Tape Standard (CUTS) interface, TV connector, Centronics parallel printer
  • Storage: Kansas City standard audio cassette interface
  • Power: standard 2.1 mm power jack connector for 8 volts unregulated DC, providing 5 volts regulated inside the Atom

The Acorn 8V power supply was only rated to 1.5 amps, which was not enough for an Atom with fully populated RAM sockets. The Atom's two internal LM7805 regulators (each regulating the +5V for a section of the digital logic independently) also got uncomfortably hot. Therefore, some Atom enthusiasts removed and bypassed the internal regulators and powered their Atoms from an external 5V regulated power supply. Three amps were typically needed for a fully populated Atom.

There has never been a de facto standard for external 5V connections, but using the same 7-pin DIN connectors as the Atari 800XL allowed an Atari 5V linear power supply to drive an Atom, so long as the current was less than the Atari PSU rating (1 or 1.5 amps, depending on the model). These are now uncommon, but 5V wall-wart switch-mode power supplies capable of supplying several amps are a readily and cheaply available alternative.

External links

{{commons category|Acorn Atom}}
  • Yet another computer museum - Acorn Atom
  • The Acorn Atom Review
  • Atom BASIC
  • Acorn Atom in FPGA
  • The complete Atom DVD
  • [https://www.youtube.com/user/AtomsUp/videos YouTube page totally dedicated to the Acorn Atom]
{{Acorn computers}}

4 : 6502-based home computers|Acorn Computers|Computer-related introductions in 1981|British computers

随便看

 

开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。

 

Copyright © 2023 OENC.NET All Rights Reserved
京ICP备2021023879号 更新时间:2024/11/11 6:44:15