| 词条 | Sonochemistry |
| 释义 |
In chemistry, the study of sonochemistry is concerned with understanding the effect of ultrasound in forming acoustic cavitation in liquids, resulting in the initiation or enhancement of the chemical activity in the solution.[1] Therefore, the chemical effects of ultrasound do not come from a direct interaction of the ultrasonic sound wave with the molecules in the solution. HistoryThe influence of sonic waves traveling through liquids was first reported by Robert Williams Wood (1868–1955) and Alfred Lee Loomis (1887–1975) in 1927. The experiment was about the frequency of the energy that it took for sonic waves to "penetrate" the barrier of water. He came to the conclusion that sound does travel faster in water, but because of the water's density compared to our earth's atmosphere it was incredibly hard to get the sonic waves into the water. After lots of research they decided that the best way to disperse sound into the water was to make loud noises into the water by creating bubbles that were made at the same time as the sound. One of the easier ways that they put sound into the water was they simply yelled. But another road block they ran into was the ratio of the amount of time it took for the lower frequency waves to penetrate the bubbles walls and access the water around the bubble, and then time from that point to the point on the other end of the body of water. But despite the revolutionary ideas of this article it was left mostly unnoticed.[2] Sonochemistry experienced a renaissance in the 1980s with the advent of inexpensive and reliable generators of high-intensity ultrasound.[3] Physical principlesSound waves propagating through a liquid at ultrasonic frequencies do so with a wavelength that is dramatically longer than molecular dimensions or the bond length between atoms in the molecule. Therefore, the sound wave cannot affect that vibrational energy of the bond, and can therefore not directly increase the internal energy of a molecule.[3][4] Instead, sonochemistry arises from acoustic cavitation: the formation, growth, and implosive collapse of bubbles in a liquid.[5] The collapse of these bubbles is an almost adiabatic process, thereby resulting in the massive build-up of energy inside the bubble, resulting in extremely high temperatures and pressures in a microscopic region of the sonicated liquid. The high temperatures and pressures result in the chemical excitation of any matter that was inside of, or in the immediate surroundings of the bubble as it rapidly imploded. A broad variety of outcomes can result from acoustic cavitation, including sonoluminescence, increased chemical activity in the solution due to the formation of primary and secondary radical reactions, and increase chemical activity through the formation of new, relatively stable chemical species that can diffuse further into the solution to create chemical effects (for example, the formation of hydrogen peroxide from the combination of two hydroxyl radicals formed following the dissociation of water vapor inside the collapsing bubbles what water is exposed to ultrasound. Upon irradiation with high intensity sound or ultrasound, acoustic cavitation usually occurs. Cavitation – the formation, growth, and implosive collapse of bubbles irradiated with sound — is the impetus for sonochemistry and sonoluminescence.[6] Bubble collapse in liquids produces enormous amounts of energy from the conversion of kinetic energy of the liquid motion into heating the contents of the bubble. The compression of the bubbles during cavitation is more rapid than thermal transport, which generates a short-lived localized hot-spot. Experimental results have shown that these bubbles have temperatures around 5000 K, pressures of roughly 1000 atm, and heating and cooling rates above 1010 K/s.[7][8] These cavitations can create extreme physical and chemical conditions in otherwise cold liquids. With liquids containing solids, similar phenomena may occur with exposure to ultrasound. Once cavitation occurs near an extended solid surface, cavity collapse is nonspherical and drives high-speed jets of liquid to the surface.[6] These jets and associated shock waves can damage the now highly heated surface. Liquid-powder suspensions produce high velocity interparticle collisions. These collisions can change the surface morphology, composition, and reactivity.[9] Sonochemical reactionsThree classes of sonochemical reactions exist: homogeneous sonochemistry of liquids, heterogeneous sonochemistry of liquid-liquid or solid–liquid systems, and, overlapping with the aforementioned, sonocatalysis.[10][11][12] Sonoluminescence is a consequence of the same cavitation phenomena that is responsible for homogeneous sonochemistry.[13][14][15] The chemical enhancement of reactions by ultrasound has been explored and has beneficial applications in mixed phase synthesis, materials chemistry, and biomedical uses. Because cavitation can only occur in liquids, chemical reactions are not seen in the ultrasonic irradiation of solids or solid–gas systems. For example, in chemical kinetics, it has been observed that ultrasound can greatly enhance chemical reactivity in a number of systems by as much as a million-fold;[16] effectively acting to activate heterogenous catalysts. In addition, in reactions at liquid-solid interfaces, ultrasound breaks up the solid pieces and exposes active clean surfaces through microjet pitting from cavitation near the surfaces and from fragmentation of solids by cavitation collapse nearby. This gives the solid reactant a larger surface area of active surfaces for the reaction to proceed over, increasing the observed rate of reaction. [17], [18] While the application of ultrasound often generates mixtures of products, a paper published in 2007 in the journal Nature described the use of ultrasound to selectively affect a certain cyclobutane ring-opening reaction.[19] Atul Kumar has reported multicomponent reaction Hantzsch ester synthesis in Aqueous Micelles using ultrasound.[20] Some water pollutants, especially chlorinated organic compounds, can be destroyed sonochemically.[21] Sonochemistry can be performed by using a bath (usually used for ultrasonic cleaning) or with a high power probe, called an ultrasonic horn. Sonochemistry can also be used to weld metals which are not normally feasible to join, or form novel alloys on a metal surface. This is distantly related to the method of calibrating ultrasonic cleaners using a sheet of tinfoil and counting the holes. See also
References1. ^{{cite journal |journal=Science |date=1990 |volume=247 |issue=4949 |pages=1439–45 |doi=10.1126/science.247.4949.1439 |pmid=17791211 |title=Sonochemistry |last1=Suslick |first1=K. S. }} 2. ^Wood, R.W.; Loomis, A.L. The Physical and Biological Effects of High Frequency Sound Waves of Great Intensity. Phil. Mag. 1927, 4, 414. 3. ^Suslick, K. S. "Sonochemistry," Science 1990, 247, 1439–1445. 4. ^Suslick, K. S.; Flannigan, D. J. “Inside a Collapsing Bubble, Sonoluminescence and Conditions during Cavitation” Annu. Rev. Phys. Chem. 2008, 59, 659–683. 5. ^1 Suslick, Kenneth S. (February 1989). The Chemical Effects of Ultrasound. Scientific American. pp.62–68 (p.62) 6. ^1 Leighton, T.G. The Acoustic Bubble; Academic Press: London, 1994, pp.531–555. 7. ^Suslick, K.S.; Hammerton, D.A.; Cline, R.E., Jr. J. Am. Chem. Soc. 1986, 108, 5641. 8. ^Flint, E.B.; Suslick, K.S. Science. 1991, 253, 1397. 9. ^Suslick, K.S.; Doktycz, S.J. Adv. Sonochem. 1990, 1, 197–230. 10. ^Einhorn, C.; Einhorn, J. Luche, J.L. Synthesis 1989, 787. 11. ^Luche, J.L.; Compets. Rendus. Serie. IIB 1996, 323, 203, 307. 12. ^Pestman, J.M.; Engberts, J.B.F.N.; de Jong, F. Jong. Recl. Trav. Chim. Pays-Bas. 1994, 113, 533. 13. ^Crum, L.A. Physics Today 1994, 47, 22. 14. ^Putterman, S.J. Sci. Am. February 1995, p. 46. 15. ^Suslick, K. S.; Flannigan, D. J. "Inside a Collapsing Bubble: Sonoluminescence and the Conditions during Cavitation" Annu. Rev. Phys. Chem. 2008, 59, 659-683. 16. ^Suslick, K.S.; Casadonte, D.J. J. Am. Chem. Soc. 1987, 109, 3459. 17. ^Zeiger, B. W.; Suslick, K. S. "Sonofragmentation of Molecular Crystals" J. Am. Chem. Soc. 2011, 133, 14530-14533. 18. ^Hinman, J. J.; Suslick, K. S. "Nanostructured Materials Synthesis Using Ultrasound" Top. Curr. Chem., 2017, 375, 1-36. DOI: 10.1007/s41061-016-0100-9 19. ^{{cite news | publisher=Chemical & Engineering News | title = Brute Force Breaks Bonds | date = 22 March 2007 | url = http://pubs.acs.org/cen/news/85/i13/8513notw4.html}} 20. ^Atul Kumar, R.A.Muarya SYNLETT 1987, 109, 3459.https://www.organic-chemistry.org/abstracts/lit2/076.shtm 21. ^Gonzalez-Garcia, J, Saez, V., Tudela, I., Diez-Garcia, M.I., Esclapez, M.D., Louisnard, O., (2010) Sonochemical Treatment of Water Polluted by Chlorinated Organocompounds. A Review. Water 2(1), 28–74. http://www.mdpi.com/2073-4441/2/1/28/ External links
6 : Physical phenomena|Chemistry|Quantum chemistry|Acoustics|Fluid dynamics|Ultrasound |
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。