1. History

2. Objectives

3. Spacecraft
     Scientific instruments   Measurement principles 

4. Data processing

5. Launch and orbit

6. Stray light problem

7. Mission progress
     Data releases    Significant results  

8. GaiaNIR

9. See also

10. References

11. External links

• EADS Astrium
• e2v Technologies}}

• ASTRO: Astrometric instrument
• BP/RP: Photometric instrument
• RVS: Radial velocity spectrometer }}

• S Band (TT&C support)
• X Band (data acquisition)}}

• a few kbit/s down & up (S Band)
• 3–8 Mbit/s download (X Band)}}

The spacecraft has monitored each of its target objects about 70 times^[12] over the first five years of the mission to study the precise position and motion of each target, and will keep doing so.^[7][8] The spacecraft has enough micro-propulsion fuel to operate until about November 2024.^[15] As its detectors are not degrading as fast as initially expected, the mission could therefore be extended.^[1] The Gaia targets represent approximately 1% of the Milky Way population^[9] with all stars brighter than magnitude 20 in a broad photometric band that covers most of the visual range.^[10] Additionally, Gaia is expected to detect thousands to tens of thousands of Jupiter-sized exoplanets beyond the Solar System,^[11] 500,000 quasars outside our galaxy and tens of thousands of new asteroids and comets within the Solar System.^[12][13][14]

Gaia will create a precise three-dimensional map of astronomical objects throughout the Milky Way and map their motions, which encode the origin and subsequent evolution of the Milky Way. The spectrophotometric measurements will provide the detailed physical properties of all stars observed, characterizing their luminosity, effective temperature, gravity and elemental composition. This massive stellar census will provide the basic observational data to analyze a wide range of important questions related to the origin, structure, and evolutionary history of our galaxy.

The successor to the Hipparcos mission (operational 1989–93), Gaia is part of ESA's Horizon 2000+ long-term scientific program. Gaia was launched on 19 December 2013 by Arianespace using a Soyuz ST-B/Fregat-MT rocket flying from Kourou in French Guiana.^[15][16] The spacecraft currently operates in a Lissajous orbit around the Sun–Earth L₂ Lagrangian point.

History

The Gaia space telescope has its roots in ESA's Hipparcos mission (1989–1993). Its mission was proposed in October 1993 by Lennart Lindegren (Lund University, Sweden) and Michael Perryman (ESA) in response to a call for proposals for ESA's Horizon Plus long-term scientific programme. It was adopted by ESA's Science Programme Committee as cornerstone mission number 6 on 13 October 2000, and the B2 phase of the project was authorised on 9 February 2006, with EADS Astrium taking responsibility for the hardware. The name "Gaia" was originally derived as an acronym for Global Astrometric Interferometer for Astrophysics. This reflected the optical technique of interferometry that was originally planned for use on the spacecraft. While the working method evolved during studies and the acronym is no longer applicable, the name Gaia remained to provide continuity with the project.^[17]

The total cost of the mission is around €740 million (~ $1 billion), including the manufacture, launch and ground operations.^[18] Gaia was completed two years behind schedule and 16% above its initial budget, mostly due to the difficulties encountered in polishing Gaia{{'s}} ten mirrors and assembling and testing the focal plane camera system.^[19]

Objectives

The Gaia space mission has the following objectives:

• To determine the intrinsic luminosity of a star requires knowledge of its distance. One of the few ways to achieve this without physical assumptions is through the star's parallax. Ground-based observations would not measure such parallaxes with sufficient precision due to the effects of the atmosphere and instrumental biases. For instance, Cepheid variables are used as standard candles to measure distances to galaxies, but the accuracy in their own distance measurement is poor. Thus, quantities depending on them, such as the speed of expansion of the universe, remain inaccurate. Measuring their distances accurately has a great impact on the understanding of the other galaxies and thus the whole cosmos (see cosmic distance ladder).
• Observations of the faintest objects will provide a more complete view of the stellar luminosity function. Gaia will observe 1 billion stars and other bodies, representing 1% of such bodies in the Milky Way galaxy.^[20] All objects up to a certain magnitude must be measured in order to have unbiased samples.
• To permit a better understanding of the more rapid stages of stellar evolution (such as the classification, frequency, correlations and directly observed attributes of rare fundamental changes and of cyclical changes). This has to be achieved by detailed examination and re-examination of a great number of objects over a long period of operation. Observing a large number of objects in the galaxy is also important to understand the dynamics of our galaxy.
• Measuring the astrometric and kinematic properties of a star is necessary in order to understand the various stellar populations, especially the most distant.

In order to achieve these objectives, Gaia has these goals:

• Determine the position, parallax, and annual proper motion of 1 billion stars with an accuracy of about 20 microarcseconds (µas) at 15 mag, and 200 µas at 20 mag.
• Determine the positions of stars at a magnitude of V = 10 down to a precision of 7 μas—this is equivalent to measuring the position to within the diameter of a hair from 1000 km away—between 12 and 25 μas down to V = 15, and between 100 and 300 μas to V = 20, depending on the colour of the star.
• The distance to about 20 million stars will thus be measured with a precision of 1% or better, and about 200 million distances will be measured to better than 10%. Distances accurate to 10% will be achieved as far away as the Galactic Centre, 30,000 light-years away.^[21]
• Measure the tangential speed of 40 million stars to a precision of better than 0.5 km/s.
• Derive the atmospheric parameters (effective temperature, line-of-sight interstellar extinction, surface gravity, metallicity) for all stars observed,^[22] plus some more detailed chemical abundances for targets brighter than V = 15.^[23]
• Measure the orbits and inclinations of a thousand extrasolar planets accurately, determining their true mass using astrometric planet detection methods.^[24][25]
• More precisely measure the bending of starlight by the Sun's gravitational field, predicted by Albert Einstein’s General Theory of Relativity and first detected by Arthur Eddington during a 1919 solar eclipse, and therefore directly observe the structure of spacetime.^[17]
• Potential to discover Apohele asteroids with orbits that lie between Earth and the Sun, a region that is difficult for Earth-based telescopes to monitor since this region is only visible in the sky during or near the daytime.^[26]
• Detect up to 500,000 quasars.

Spacecraft

Gaia was launched by Arianespace, using a Soyuz ST-B rocket with a Fregat-MT upper stage, from the Ensemble de Lancement Soyouz at Kourou in French Guiana on 19 December 2013 at 09:12 UTC (06:12 local time). The satellite separated from the rocket's upper stage 43 minutes after launch at 09:54 UTC.^[27][28] The craft headed towards the Sun–Earth Lagrange point L2 located approximately 1.5 million kilometres from Earth, arriving there 8 January 2014.^[29] The L2 point provides the spacecraft with a very stable gravitational and thermal environment. There it uses a Lissajous orbit that avoids blockage of the Sun by the Earth, which would limit the amount of solar energy the satellite could produce through its solar panels, as well as disturb the spacecraft's thermal equilibrium. After launch, a 10-metre-diameter sunshade was deployed. The sunshade always faces the Sun, thus keeping all telescope components cool and powering Gaia using solar panels on its surface.

Scientific instruments

The Gaia payload consists of three main instruments:

1. The astrometry instrument (Astro) precisely determines the positions of stars of magnitude 5.7 to 20 by measuring their angular position. By combining the measurements of any given star over the five-year mission, it will be possible to determine its parallax, and therefore its distance, and its proper motion —the velocity of the star projected on the plane of the sky.
2. The photometric instrument (BP/RP) allows the acquisition of luminosity measurements of stars over the 320–1000 nm spectral band, over the same magnitude 5.7–20.{{Citation needed|date=October 2012}} The blue and red photometers (BP/RP) are used to determine stellar properties such as temperature, mass, age and elemental composition.^{&91;17&93;&91;30&93;} Multi-colour photometry is provided by two low-resolution fused-silica prisms dispersing all the light entering the field of view in the along-scan direction prior to detection. The Blue Photometer (BP) operates in the wavelength range 330–680 nm; the Red Photometer (RP) covers the wavelength range 640–1050 nm.^&91;31&93;
3. The Radial-Velocity Spectrometer (RVS) is used to determine the velocity of celestial objects along the line of sight by acquiring high-resolution spectra in the spectral band 847–874 nm (field lines of calcium ion) for objects up to magnitude 17. Radial velocities are measured with a precision between 1 km/s (V=11.5) and 30 km/s (V=17.5). The measurements of radial velocities are important to correct for perspective acceleration which is induced by the motion along the line of sight."^&91;31&93; The RVS reveals the velocity of the star along the line of sight of Gaia by measuring the Doppler shift of absorption lines in a high-resolution spectrum.

In order to maintain the fine pointing to focus on stars many light years away, there are almost no moving parts. The spacecraft subsystems are mounted on a rigid silicon carbide frame, which provides a stable structure that will not expand or contract due to heat. Attitude control is provided by small cold gas thrusters that can output 1.5 micrograms of nitrogen per second.

The telemetric link with the satellite is about 3 Mbit/s on average, while the total content of the focal plane represents several Gbit/s. Therefore, only a few dozen pixels around each object can be downlinked.

Mirrors (M)

• Mirrors of telescope 1 (M1, M2 and M3)
• Mirrors of telescope 2 (M'1, M'2 and M'3)
• mirrors M4, M'4, M5, M6 are not shown

Other components (1–9)

1. Optical bench (silicon carbide torus)
2. Focal plane cooling radiator
3. Focal plane electronics^&91;43&93;
4. Nitrogen tanks
5. Diffraction grating spectroscope
6. Liquid propellant tanks
7. Star trackers
8. Telecommunication panel and batteries
9. Main propulsion subsystem

(A) Light path of telescope 1

The design of the Gaia focal plane and instruments. Due to the spacecraft's rotation, images cross the focal plane array right-to-left at 60 arc seconds per second.^[32]

1. Incoming light from mirror M3
2. Incoming light from mirror M'3
3. Focal plane, containing the detector for the Astrometric instrument in light blue, Blue Photometer in dark blue, Red Photometer in red, and Radial Velocity Spectrometer in pink.
4. Mirrors M4 and M'4, which combine the two incoming beams of light
5. Mirror M5
6. Mirror M6, which illuminates the focal plane
7. Optics and diffraction grating for the Radial Velocity Spectrometer (RVS)
8. Prisms for the Blue Photometer and Red Photometer (BP and RP)

Measurement principles

Similar to its predecessor Hipparcos, but with a precision one hundred times better, Gaia consists of two telescopes providing two observing directions with a fixed, wide angle of 106.5° between them.^[33] The spacecraft rotates continuously around an axis perpendicular to the two telescopes' lines of sight. The spin axis in turn has a slight precession across the sky, while maintaining the same angle to the Sun. By precisely measuring the relative positions of objects from both observing directions, a rigid system of reference is obtained.

The two key telescope properties are:

• 1.45 × 0.5 m primary mirror for each telescope
• 1.0 × 0.5 m focal plane array on which light from both telescopes is projected. This in turn consists of 106 CCDs of 4500 × 1966 pixels each, for a total of 937.8 megapixels (commonly depicted as a gigapixel-class imaging device).^[34][35][36]

Each celestial object will be observed on average about 70 times during the mission, which is expected to last five years. These measurements will help determine the astrometric parameters of stars: two corresponding to the angular position of a given star on the sky, two for the derivatives of the star's position over time (motion) and lastly, the star's parallax from which distance can be calculated. The radial velocity of the brighter stars is measured by an integrated spectrometer observing the Doppler effect. Because of the physical constraints imposed by the Soyuz spacecraft, Gaia{{'s}} focal arrays could not be equipped with optimal radiation shielding, and ESA expects their performance to suffer somewhat toward the end of the five-year mission. Ground tests of the CCDs while they were subjected to radiation provided reassurance that the primary mission's objectives can be met.^[37]

The expected accuracies of the final catalogue data have been calculated following in-orbit testing, taking into account the issues of stray light, degradation of the optics, and the basic angle instability. The best accuracies for parallax, position, and proper motion are obtained for the brighter observed stars, apparent magnitudes 3–12. The standard deviation for these stars is expected to be 6.7 micro-arc seconds or better. For fainter stars, error levels increase, reaching 26.6 micro-arc seconds error in the parallax for 15th magnitude stars, and several hundred micro-arc seconds for 20th magnitude stars.^[38] For comparison, the best parallax error levels from the new Hipparcos reduction are no better than 100 micro-arc seconds, with typical levels several times larger.^[39]

Data processing

The overall data volume that will be retrieved from the spacecraft during the nominal five-year mission at a compressed data rate of 1 Mbit/s is approximately 60 TB, amounting to about 200 TB of usable uncompressed data on the ground, stored in an InterSystems Caché database. The responsibility of the data processing, partly funded by ESA, is entrusted to a European consortium, the Data Processing and Analysis Consortium (DPAC), which was selected after its proposal to the ESA Announcement of Opportunity released in November 2006. DPAC's funding is provided by the participating countries and has been secured until the production of Gaia{{'s}} final catalogue scheduled for 2020.^[41]

Launch and orbit

In October 2013 ESA had to postpone Gaia{{'s}} original launch date, due to a precautionary replacement of two of Gaia{{'s}} transponders. These are used to generate timing signals for the downlink of science data. A problem with an identical transponder on a satellite already in orbit motivated their replacement and reverification once incorporated into Gaia. The rescheduled launch window was from 17 December 2013 to 5 January 2014, with Gaia slated for launch on 19 December.^[42]

About three weeks after launch, on 8 January 2014, it reached its designated orbit around the Sun-Earth L2 Lagrange point (SEL2),^[44][45] about 1.5 million kilometers from Earth.

In 2015 the Pan-STARRS observatory discovered an object orbiting the Earth, which the Minor Planet Center catalogued as object {{mp|2015 HP|116}}. It was soon found to be an accidental rediscovery of the Gaia spacecraft and the designation was promptly retracted.^[46]

Stray light problem

Shortly after launch, ESA revealed that Gaia was suffering from a stray light problem. The problem was initially thought to be due to ice deposits causing some of the light diffracted around the edges of the sunshield and entering the telescope apertures to be reflected towards the focal plane.^[47] The actual source of the stray light was later identified as the fibers of the sunshield, protruding beyond the edges of the shield.^[48] This results in a "degradation in science performance [which] will be relatively modest and mostly restricted to the faintest of Gaia{{'s}} one billion stars." Mitigation schemes are being implemented to optimise the mission performance. The degradation is more severe for the RVS spectrograph than for the astrometry measurements. It only affects the fainter stars.

Mission progress

The testing and calibration phase, which started while Gaia was en route to SEL2 point, continued until the end of July 2014,^[49] three months behind schedule due to unforeseen issues with stray light entering the detector. After the six-month commissioning period, the satellite started its nominal five-year period of scientific operations on 25 July 2014 using a special scanning mode that intensively scanned the region near the ecliptic poles; on 21 August 2014 Gaia began using its normal scanning mode which provides more uniform coverage.^[50]

Although it was originally planned to limit Gaia{{'}}s observations to stars fainter than magnitude 5.7, tests carried out during the commissioning phase indicated that Gaia could autonomously identify stars as bright as magnitude 3. When Gaia entered regular scientific operations in July 2014, it was configured to routinely process stars in the magnitude range 3 – 20.^[51] Beyond that limit, special procedures are used to download raw scanning data for the remaining 230 stars brighter than magnitude 3; methods to reduce and analyse these data are being developed; and it is expected that there will be "complete sky coverage at the bright end" with standard errors of "a few dozen µas".^[52]

In 2018 the Gaia mission was extended to 2020, with an additional "indicative extension" extending for another two years until 2022.^[53] The limiting factor to further mission extensions is the supply of fuel for the micro-propulsion system, which is expected to last until November 2024.^[54]

On 12 September 2014, Gaia discovered its first supernova in another galaxy.^[55] On 3 July 2015, a map of the Milky Way by star density was released, based on data from the spacecraft.^[56] As of August 2016, "more than 50 billion focal plane transits, 110 billion photometric observations and 9.4 billion spectroscopic observations have been successfully processed."^[57]

Data releases

The Gaia catalogue is released in stages that will contain increasing amounts of information; the early releases also miss some stars, especially fainter stars located in dense star fields and members of close binary pairs.^[71] The first data release, Gaia DR1, based on 14 months of observations made through September 2015, took place on 14 September 2016^[58][59] and is described in a series of articles published in Astronomy and Astrophysics.^[60] The data release includes "positions and … magnitudes for 1.1 billion stars using only Gaia data; positions, parallaxes and proper motions for more than 2 million stars" based on a combination of Gaia and Tycho-2 data for those objects in both catalogues; "light curves and characteristics for about 3000 variable stars; and positions and magnitudes for more than 2000 … extragalactic sources used to define the celestial reference frame".^[61][62][63] Data from this DR1 release can be accessed at the Gaia archive,^[64] as well as through astronomical data centers such as CDS.

The second data release (DR2), which occurred on 25 April 2018,^[65][66] is based on 22 months of observations made between 25 July 2014 and 23 May 2016. It includes positions, parallaxes and proper motions for about 1.3 billion stars and positions of an additional 300 million stars, red and blue photometric data for about 1.1 billion stars and single colour photometry for an additional 400 million stars, and median radial velocities for about 7 million stars between magnitude 4 and 13. It also contains data for over 14,000 selected Solar System objects.^[67][68] The coordinates in DR2 use the Gaia celestial reference frame (Gaia–CRF2), which is based on observations of 492,006 sources believed to be quasars, and which has been tied to the International Celestial Reference System. Comparison of Gaia–CRF2 with a preliminary version of the forthcoming ICRF3 shows a global agreement of 20 to 30 μas, although individual sources may differ by several mas.^[69] Since the data processing procedure links individual Gaia observations with particular sources on the sky, in some cases the association of observations with sources will be different in the second data release. Consequently, DR2 uses different source identification numbers than DR1.^[70] A number of issues have been identified with the DR2 data, including small systematic errors in astrometry and significant contamination of radial velocity values in crowded star fields, which may affect some one percent of the radial velocity values. Ongoing work should resolve these issues in future releases.^[71]

Due to uncertainties in the data pipeline, the third data release, which will be based on 34 months of observations, has been split into two parts so that data that is ready first, will be released first. The first part, EDR3, consisting of improved positions, parallaxes and proper motions, will be released in the third quarter of 2020; DR3, scheduled for the second half of 2021, will include the EDR3 data, plus Solar System data, variability information, results for non-single stars, and astrophysical parameters.^[72]

The full data release for the nominal mission will include full astrometric, photometric, and radial-velocity catalogues, variable-star and non-single-star solutions, source classifications plus multiple astrophysical parameters for stars, unresolved binaries, galaxies, and quasars, an exo-planet list and epoch and transit data for all sources. Additional release(s) will take place depending on mission extensions.^[63]

An outreach application, Gaia Sky, has been developed to explore the galaxy in three dimensions using Gaia data.^[73]

Significant results

In November 2017, scientists led by Davide Massari of the Kapteyn Astronomical Institute, University of Groningen, Netherlands released a paper^[74] describing the characterization of proper motion (3D) within the Sculptor dwarf galaxy, and of that galaxy's trajectory through space and with respect to the Milky Way, using data from Gaia and the Hubble Space Telescope. Massari said, “With the precision achieved we can measure the yearly motion of a star on the sky which corresponds to less than the size of a pinhead on the Moon as seen from Earth.” The data showed that Sculptor orbits the Milky Way in a highly elliptical orbit; it is currently near its closest approach at a distance of about {{convert|83.4|kpc|ly}}, but the orbit can take it out to around {{convert|222|kpc|ly}} distant.

In October 2018, Leiden University astronomers were able to determine the orbits of 20 hypervelocity stars from the DR2 dataset. Expecting to find a single star exiting the Milky Way, they instead found seven. More surprisingly, the team found that 13 hypervelocity stars were instead approaching the Milky Way, possibly originating from as-of-yet unknown extragalactic sources. Alternatively, they could be halo stars to this galaxy, and further spectroscopic studies will help determine which scenario is more likely.^[75][76] Independent measurements have demonstrated that the greatest Gaia radial velocity among the hypervelocity stars is contaminated by light from nearby bright stars in a crowded field and cast doubt on the high Gaia radial velocities of other hypervelocity stars.^[77]

In November 2018, the galaxy Antlia 2 was discovered. It is similar in size to the Large Magellanic Cloud, despite being 10,000 times fainter. Antlia 2 has the lowest surface brightness of any galaxy discovered.^[78]

GaiaNIR

GaiaNIR (Gaia Near Infra-Red) is a proposed successor of Gaia in the Near Infra-Red. The mission could enlarge the current catalog with sources that are only visible in the Near Infra-Red and at the same time improving the star parallax and proper motion accuracy by revisiting the sources of the Gaia catalog.^[79]

See also

• Cosmic distance ladder
• SIM PlanetQuest, a cancelled US project

References

External links

• Gaia mission home
• ESA Gaia mission
• ESA Gaia Archive
• Gaia page at ESA Spacecraft Operations
• {{cite web |url=http://blogs.esa.int/gaia/ |title=Gaia blog |author=|website=blogs.esa.int |publisher=European Space Agency}}
• Gaia library
• Journey to a Billion Suns is a 360° immersive film – Gaia mission.
• {{youtube|2Z_O66Z4l6Y|Video (12:58) – 1st Data Release (Gaia; 14 September 2016)}}
• {{youtube|VINs-JcNmKs|Video (03:47) – 2nd Data Release (Gaia; 25 April 2018)}}
• {{youtube|bZfFdCknTQc|Video (01:25; 360° view) – Entire Sky (Gaia; 25 April 2018)}}

• Hexakisoctahedron
• Hexakis tetrahedron
• Hexalateral talks
• Hexaldehyde
• Hexalen
• Hexa-logarithm
• Hexalogy
• Hexamela
• Hexameral
• Hexameral literature
• Hexameral poem
• Hexameria
• Hexameric
• Hexamers
• Hexameryx
• Hexametapol
• Hexameter poetry
• Hexamethonium bromide
• Hexamethoxyflavone
• Hexamethylenetetramine chloroallyl chloride
• Hexamethylphosphoric triamide
• Hexamethylpropyleneamine oxime
• Hexamethyl tungsten
• Hexamili
• Hexamine Stove