“Annealing by short circuit”的意思、由来-开放百科全书

词条

Annealing by short circuit

释义

Process
See also
References

Annealing by short circuit is a method of efficiently annealing copper wire which employs a controlled electrical short circuit. It can be advantageous because it does not require a temperature-regulated furnace like other methods of annealing.

Process

The process consists of two conductive pulleys (step pulleys) which the wire passes across after it is drawn. The two pulleys have an electrical potential across them, which causes the wire to form a short circuit. The Joule effect causes the temperature of the wire to rise to approximately 400 °C. This temperature is affected by the rotational speed of the pulleys, the ambient temperature, and the voltage applied. Where is the temperature of the wire, is a constant, is the voltage applied, is the number of rotations of the pulleys per minute, and is the ambient temperature:

The constant depends on the diameter of the pulleys and the resistivity of the copper.

Purely in terms of the temperature of the copper wire, an increase in the speed with which the wire passes through the pulley system has the same effect as a decrease in resistance. Therefore, the speed with which the wire can be drawn through varies quadratically as the voltage applied.

References

Thesis of Degree, Cable Manufacture and Tests of General Use and Energy. - Jorge Luis Pedraz (1994), UNI, Files, Peru.
Dynamic annealing of the Copper wire by using a Controlled Short circuit. = Jorge Luis Pedraz (1999), Peru: Lima, CONIMERA 1999, INTERCON 99,

1 : Metal heat treatments

随便看

开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。

Process

See also

References