1. References

2. See also

Fluxes are substances, usually oxides, used in glasses, glazes and ceramic bodies to lower the high melting point of the main glass forming constituents, usually silica and alumina. A ceramic flux functions by promoting partial or complete liquefaction.^[1][2] The most commonly used fluxing oxides in a ceramic glaze contain lead, sodium, potassium, lithium, calcium, magnesium, barium, zinc, strontium, and manganese. These are introduced to the raw glaze as compounds, for example lead as lead oxide. Boron is considered by many to be a glass former rather than a flux.

Some oxides such as calcium flux significantly only at high temperature. Lead is the traditional low temperature flux, but it is now avoided because it is toxic even in small quantities. It is being replaced by other substances, especially boron and zinc.^[3]

In clay bodies a flux creates a limited and controlled amount of glass, which works to cement crystalline components together. Fluxes play a key role in the vitrification of clay bodies by reducing the overall melting point. The most common fluxes used in clay bodies are potassium oxide and

sodium oxide which are found in feldspars. A predominant flux in glazes is calcium oxide which is usually obtained from limestone. The two most common feldspars in the ceramic industry are potash feldspar (orthoclase) and soda feldspar (albite).

References

See also

• Secondary Flux

• 3 Cassiopeiae
• 3CAT
• 3 Cavalry Divison Amedeo Duca d'Aosta
• 3CCD camera
• 3cdc
• 3CDC
• 3C (disambiguation)
• 3 Cell Model
• 3 CFFTS
• 3CFFTS
• 3 Chains o' Gold (film)
• 3 chak
• 3 Char Sau Bees
• 3 cheers
• 3-chloro-1,2-propanediol
• 3-chloro-4-methylaniline
• 3-chloro-4-methylbenzenamine
• 3-chlorocholest-5-ene
• 3-chlorophenylpiperazine
• 3-Chlorophenylpiperazine
• 3-Chlorophthalic Anhydride
• 3-Chlorophthalic anhydride
• 3-Chloropropanoic acid
• 3-chloropropyne
• 3-chloro-p-toluidine