| 词条 | Klann linkage | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 释义 |
The Klann linkage is a planar mechanism designed to simulate the gait of legged animal and function as a wheel replacement. The linkage consists of the frame, a crank, two grounded rockers, and two couplers all connected by pivot joints. It was developed by Joe Klann in 1994 as an expansion of Burmester curves which are used to develop four-bar double-rocker linkages such as harbor crane booms.[2] It is categorized as a modified Stephenson type III kinematic chain.[3][4][5][6] The proportions of each of the links in the mechanism are defined to optimize the linearity of the foot for one-half of the rotation of the crank. The remaining rotation of the crank allows the foot to be raised to a predetermined height before returning to the starting position and repeating the cycle. Two of these linkages coupled together at the crank and one-half cycle out of phase with each other will allow the frame of a vehicle to travel parallel to the ground. The Klann linkage provides many of the benefits of more advanced walking vehicles without some of their limitations. It can step over curbs, climb stairs, or travel into areas that are currently not accessible with wheels but does not require microprocessor control or multitudes of actuator mechanisms. It fits into the technological space between these walking devices and axle-driven wheels. MechanismKlann linkage work on the basis of kinematics where all links gives relative motion with each other. It converts the rotatory motion to linear motion, and looks like an animal walking.[7] This animation show the working of klann mechanism. {{clear}}Comparison with Jansen's linkage{{unreferenced|section|date=November 2016}}The Klann mechanism uses six links per leg, whereas the Jansen's linkage developed by Theo Jansen uses eight links per leg, with one degree of freedom. It can walk only on even surfaces and terrain. The number of links in the Jansen mechanism is greater than in the Klann mechanism, and is more costly. The Klann linkage can walk on non-planar roads and hill areas, and on uneven surfaces and terrain. The design of the Klann mechanism is portable with less linkage for movement. Friction is required for motion between the legs and surface so it can hold, otherwise it will slip. Example legIn US Patent 6,260,862 there is a set of coordinates for an example leg:[4]
See also
References1. ^{{Citation |url=http://eprints.uwe.ac.uk/16101/1/Clawar_TomR_Vs1.0%20%281%29.pdf |authors=Rooney, T., Pearson, M., Welsby, J., Horsfield, I., Sewell, R. and Dogramadzi, S. |title=Artificial active whiskers for guiding underwater autonomous walking robots |series=CLAWAR 2011 |date=6–8 September 2011 |location=Paris, France}} 2. ^{{cite web|url=http://www.mechanicalspider.com/enable.html|archive-url=https://web.archive.org/web/20040414054817/http://mechanicalspider.com/enable.html|dead-url=yes|archive-date=14 April 2004|title=Mechanical Spider|work=Klann Research And Development, LLC|accessdate=22 November 2016}} 3. ^U.S. Provisional Application Ser. No. 60/074,425, was filed on Feb. 11, 1998 4. ^1 {{US patent|6260862}} 5. ^{{US patent|6364040}} 6. ^{{US patent|6478314}} 7. ^{{cite news|url=https://www.wired.com/2010/02/robotic-spider-melds-legos-and-3-d-printing/|title=Robotic Spider Melds Legos and 3-D Printing|first=Priya|last=Ganapati|work=Wired|accessdate=22 November 2016}} External links{{Commons category|Klann linkages}}{{wikibooks|Klann linkage}}
4 : Linkages (mechanical)|Walking vehicles|Robot kinematics|1994 in robotics |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 随便看 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。