请输入您要查询的百科知识:

 

词条 Mirror support cell
释义

  1. Overview

     Basic cells  Cells for more sophisticated "small" telescopes  Cells for large telescopes 

  2. See also

  3. Notes

  4. External links

{{about|telescope mirror support cells|the neurological colloquialism "mirror cell"|Mirror neuron}}

In astronomy, a mirror support cell - more commonly mirror cell - is a component of a reflecting telescope that supports the mirror in place to hold optical alignment, allow collimation adjustment, and protect it from falling out. The common usage of the word denotes the cell that holds the primary mirror (M1), however technically it could also be used to denote the support assembly (usually called a spider or strut) for the secondary mirror (M2) or other mirrors.

Overview

Basic cells

A basic mirror cell can be built using minimal calculation and simple materials.[1] Only slightly more complex are the wooden, plastic or metal cells which are often glued and which are either not user adjustable or which have only limited adjustment and which are used in lower end commercial telescopes and smaller amateur-built telescopes.

Cells for more sophisticated "small" telescopes

Telescope makers seeking to build larger "small" telescopes with thinner mirrors find simple designs inadequate so they must resort to more complex design methods which include possible use of multiaxis adjustment potential and floating whiffletree[2] cell design, often optimimized using computer aided design programs.[3][4] There remains a good deal of discussion in the amateur telescope making community over the use of glue and the addition of simple astatic devices in such cells.

Cells for large telescopes

Astronomical observatories require a much heavier and more complex mirror support cell. One notable example of the structure needed for such telescopes is the dual cell for the M1 mirrors of the 8.4 meter Large Binocular Telescope at Mount Graham International Observatory. This is a multiple beam and truss system which in turn supports a temperature maintenance and air flow system, six position actuators and the 160 pneumatic actuators which work its active optics system. This results in a huge assembly structure weighing about 28 tons without its mirrors. Such a mirror cell requires multiple mathematical steps of finite element analysis of its deformation under static and moving loading.[5][6]

See also

  • Amateur Telescope Making - book series by Albert G. Ingalls
  • Amateur telescope making - the practice of telescope making by non-professionals
  • List of telescope parts and construction
  • Optical telescope
  • PLate OPtimizer
  • Telescope mount
  • Mirror mount

Notes

1. ^{{cite book |last=Pierce| first=J. M. | author-link=John M. Pierce|editor-first=Albert G.| editor-last=Ingalls |editor-link=Albert Graham Ingalls|title=Amateur Telescope Making, Book One |publisher=Scientific American |date=1926|pages= 94–102 |chapter=A telescope that anyone can make |isbn=}}
2. ^  Grubb 15 inch support cell built in 1835
3. ^{{cite web|last=Holm |first=Mark |authorlink= |title=Mirror Cells for Amateur Telescope Makers |work= |publisher= |url=http://www.atmsite.org/contrib/Holm/Plop_optimized_cells/index.html |archive-url=https://web.archive.org/web/20060211013216/http://www.atmsite.org/contrib/Holm/Plop_optimized_cells/index.html |dead-url=yes |archive-date=February 11, 2006 |doi= |accessdate=November 21, 2009 }}
4. ^{{Cite book| last = Kriege| first = David| authorlink = |author2=Richard Berry| title = The Dobsonian Telescope, A Practical Manual for Building Large Aperture Telescopes| publisher = Willmann-Bell| date = June 1997| location = | pages = Chapter 5| url = | doi = | id = | isbn = 978-0-943396-55-2 }}
5. ^{{Cite web| last = Miglietta| first = L.| authorlink = | title = The Final Design of the Large Binocular Telescope M1 Mirror Cells| work = Other LBT Publications| publisher = Proceedings of SPIE conference on Optical Telescopes of Today and Tomorrow, 2871, (1996)| date = 1996| url = http://medusa.as.arizona.edu/lbto/tech/m1cellhv.htm| doi = | accessdate = 2009-11-20| deadurl = yes| archiveurl = https://archive.is/20040829201113/http://medusa.as.arizona.edu/lbto/tech/m1cellhv.htm| archivedate = 2004-08-29| df = }}
6. ^{{Cite web| last = | first = | authorlink = | title = UA-95-02: Mirror Support System for Large Honeycomb Mirrors| work = Large Binocular Telescope Project Technical Memo| publisher = University of Arizona| date = 1995| url = http://medusa.as.arizona.edu/lbto/tech/ua9502.htm| doi = | accessdate = 2009-11-20| deadurl = yes| archiveurl = https://web.archive.org/web/20100703082028/http://medusa.as.arizona.edu/lbto/tech/ua9502.htm| archivedate = 2010-07-03| df = }}

External links

  • Mechanical design of the 110 cm cruxis telescope

2 : Mirrors|Telescope components

随便看

 

开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。

 

Copyright © 2023 OENC.NET All Rights Reserved
京ICP备2021023879号 更新时间:2024/11/11 12:16:44