词条 | NSU Spider |
释义 |
| image = NSU-Spider.jpg | name = NSU Spider | manufacturer = NSU Motorenwerke AG | assembly=Neckarsulm | production = 1964–1967 2,375 built | predecessor = | successor = none | body_style = 2-door cabriolet | engine = {{convert|498|cc|cuin|abbr=on|lk=in}} Single rotor Wankel | layout=RR layout | transmission = 4-speed all-synchromesh manual | length = {{convert|3580|mm|in||abbr=on}} | width = {{convert|1520|mm|in||abbr=on}} | height = {{convert|1260|mm|in||abbr=on}} | weight = {{convert|700|kg|lb||abbr=on}} (Measurements approximate) | wheelbase = {{convert|2020|mm|in||abbr=on}} | track = | related = | designer = Claus Luthe }} The NSU Spider is an automobile which was produced by NSU Motorenwerke AG from 1964 to 1967.[1] The Spider was the first Western production car in the world to be powered by a Wankel rotary engine.[2] The water-cooled single rotor engine and standard front disc brakes differentiated the car from other cars of similar type of the period. The body was designed by Bertone.[3] BodyFirst appearing at the Frankfurt Motor Show in 1964, the Spider featured a two-door cabriolet body based on that of the NSU Sport Prinz coupé introduced back in 1959. In addition to the folding roof, the Spider was distinguishable from the hard top car by a grill at the front. As with all NSU cars at the time, the engine was rear-mounted: in order to improve weight distribution, space was found for the Spider’s radiator and for its {{Convert|35|L|usgal impgal|0|sing=on}} fuel tank ahead of the driver. The front luggage locker was in consequence small. There was a second luggage area in the rear of the car above the engine. It appears that NSU Spiders were painted either red or white. Rotary engineInvented by Felix Wankel, the Wankel engine differed from a piston engine because the quasi-oval design of the combustion chamber, containing a rotor that ascribed within the chamber an epitrochoid shaped trajectory, enabling the combustion pressure to be converted directly into a rotary motion. There was no need to lose energy converting reciprocating movement into rotational movement. The result was a remarkably compact free-revving engine which, in the 1960s, was hailed by some{{Who|date=October 2013}} as the next major step forward in automobile design. It was later found that the characteristics of critical materials selected and applied by NSU to build production rotary engines were inappropriate to the stresses they would bear, and rotary-engined cars earned a reputation for unreliability. Engines required frequent rebuilding to replace worn apex seals,[4] and warranty costs associated with installation of the engine in NSU’s second Wankel-engined model destroyed the financial viability of NSU, forcing a merger with Audi in 1969.[4] The only large-scale automaker to persist with the rotary engine—and then only for niche models—was Mazda: piston engines continued to dominate the world’s automobile engine bays. These events were not foreseen during the Spider’s production period. Claimed output was initially {{convert|50|bhp|abbr=on}} at 5,500 rpm, though in later models {{convert|54|bhp|abbr=on}} at 6,000 rpm was advertised. The rotary engine was installed above the rear axle, being compact, light and free revving in comparison with conventional piston engines of the time. By ignoring the manufacturer's recommendations it was possible to rev the engine briefly above 7,000 rpm in the lower gears and thereby to achieve a 0 – 100 km/h (0 – 62 mph) time of 14.5 seconds: other sources, presumably based on following the manufacturer's recommendations, give a time of 15.7 seconds. CommercialLarge sales volumes were never envisaged for the car, and this was reflected in a relatively high retail price, USD$2,979.[4] Between 1964 and 1967 2,375 were built. In 1967, the model was withdrawn and NSU's second rotary-engined production saloon was presented. The Ro 80, totaled 37,398 units during its ten year production run. In 1966, Al Auger of Richmond, California, became the first person to race a Wankel-powered production car in an officially sanctioned race. After only installing a mandatory roll-bar and racing tires on an NSU Spider, Auger raced in 1966 and 1967 in Sports Car Club of America sanctioned road races throughout California finishing second overall in the championship both years in Class H Modified. Because SCCA had no technical information about the Wankel engine it was placed in H Modified racing against lighter, more powerful, 850 cc highly modified pure race cars. Sources and further reading1. ^nsu wankel spider 1964 at audi.com/corporate/en/company/history/models Accessed 28 December 2016 2. ^{{Cite web|url=http://www.theautochannel.com/news/2004/07/04/202357.html|title=The Wankel Engine History|accessdate=2008-02-21|work=theautochannel.com}} 3. ^http://autoweek.com/article/car-life/classic-drive-1966-nsu-spider 4. ^1 2 "The Rotary Club", Don Sherman, Automobile Magazine, February 2008, pp. 76–79
External links
7 : NSU vehicles|Sports cars|Rear-wheel-drive vehicles|Rear-engined vehicles|Cars powered by Wankel engines|1960s cars|Cars introduced in 1964 |
随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。