| 词条 | Stampe et Vertongen RSV.26/100 | |||||||||||||||
| 释义 |
The Stampe et Vertongen RSV.26/100, RSV.18/100, RSV.26/18, and SV.18 were a family of two-seat touring aircraft designed by Alfred Renard and built by Stampe et Vertongen in Belgium in the 1920s[1] and under license by Gates Aircraft in the United States as the Gates Convertiplane.[3] Originally designed as a biplane, a monoplane version soon followed, and the aircraft was eventually marketed as convertible between the two configurations.[4] Sometimes described as a lightened version of the RSV.26/140 military trainer, the RSV.26/100 was actually a fresh design.[1] Design and developmentIn 1928, Stampe et Vertongen contracted Alfred Renard to design an aircraft with which the firm could compete in the emerging touring aircraft market, which in Belgium was dominated by British types.[1] His response was a conventional, single-bay biplane with staggered wings of equal span.[5] The pilot and passenger sat in tandem open cockpits and power was provided by a radial engine in the nose.[5] The fixed undercarriage consisted of main units braced to one another, and a skid to support the tail.[5] At the time, Stampe et Vertongen designated their aircraft with two numbers: the wing area (measured in square metres) and the engine power (measured in horsepower).[6] Renard's new design had a wing area of 26 m² and was to be powered by a {{cvt|100|hp|order=flip}} Renard Type 100 and was therefore designated RSV.26/100.[1] Two years previously, the firm had introduced a training biplane for the Belgian Air Force that also had a wing area of {{cvt|26|m2}}; powered by a {{cvt|100|hp|order=flip}} engine, it had been designated the RSV.26/140.[7] The similar designations caused confusion in the aviation press, but Renard insisted that the RSV.26/140 and RSV.26/100 were two distinct aircraft.[8] With monoplanes becoming more popular, Stampe et Vertongen considered the possibility of marketing a version of the RSV.26/100 in this configuration.[4] Renard was able to realise this design by removing the lower pair of wings and bracing the upper pair of wings to the fuselage with two struts on each side.[9] The resulting aircraft, having lost 8 m² of wing area, was now designated the RSV.18/100.[4] The monoplane version was a little faster than the biplane, but climbed a little more slowly.[4] With the differences between the two configurations so minimal that one could be converted to the other within one hour, Stampe et Vertongen decided to market the type as a convertible, the RSV.26/18.[4] At the time, Wright Tuttle Motors was negotiating a license to build the Renard Type 100 engine in the United States.[10] The firm also purchased an RSV.26/100 and exported it, where it came to the attention of their client, Ivan R. Gates.[10] Gates was an exponent of light aviation and was so interested in the type that he not only purchased the first RSV.26/18, but a few weeks later, bought a license to produce it in the United States.[10] Gates established a factory at Long Island[11] and had engineer Nathan F. Vanderlip redesign the fuselage to change it from wooden construction to steel-tube construction.[10] However, only two aircraft were built[12] before the Wall Street Crash of 1929 ruined the company and Gates himself, who committed suicide as a result.[3] Three or four fuselages survived, one of which was used as a chicken coop as recently as 1975.[3] The onset of the Great Depression also halted Stampe et Vertongen's production of the type.[1] After George Ivanow joined the firm, he made one final attempt to market the design, modifying the RSV.18/100 (OO-AKG) to use a de Havilland Gipsy III engine[13] and rebuilding the fuselage and empennage along similar lines to the SV.4.[14] Marketed first as the SV.18M (Modification) tourer,[13] then further modified and marketed as the SV.18MA (Modification Armée) fighter-trainer,[13] no further production ensued. Variants
biplane version with Renard Type 100 engine (5 built)[4]
monoplane version with Renard Type 100 engine (1 built)[15] ;RSV.18/105 monoplane version with Cirrus Hermes engine (1 built)[16] ;SV.18M monoplane with de Havilland Gipsy III engine (1 converted from RSV.18/100)[13] ;SV.18MA militarised SV.18M (1 converted)[13]
convertible version with Renard Type 100 engine (2 built)[17] ;Gates Convertiplane American variant of RSV.26/18 with Renard Type 100 engine and fuselage of steel tube construction (2 built)[12] Specifications (RSV.26/100){{aerospecs|ref=Jouhaut 1999, p.58 |met or eng?=met |genhide= |crew=1 pilot |capacity=1 passenger |length m=7.10 |length ft=23 |length in=3 |span m=9.36 |span ft=30 |span in=8 |height m=2.73 |height ft=8 |height in=11 |wing area sqm=26 |wing area sqft=280 |empty weight kg=484 |empty weight lb=1,060 |gross weight kg=747 |gross weight lb=1,640 |eng1 number=1 |eng1 type=Renard Type 100 |eng1 kw=75 |eng1 hp=100 |eng2 number= |eng2 type= |perfhide= |max speed kmh=168 |max speed mph=104 |range km=640 |range miles=400 |ceiling m=4,600 |ceiling ft=15,000 |climb rate ms=6 |climb rate ftmin=1,000 }} Notes1. ^1 2 3 4 5 Jouhaud 1999, p.51 2. ^Jouhaud 1999, p.53,56 3. ^1 2 Jouhaud 1999, p.55 4. ^1 2 3 4 5 Jouhaud 1999, p.53 5. ^1 2 Jouhaud 1999, p.52 6. ^Hauet 1984, p.9 7. ^Jouhaud 1999, p.36 8. ^Hauet 1984, p.22 9. ^Jouhaud 1999, p.57 10. ^1 2 3 Jouhaud 1999, p.54 11. ^Jouhaud 1999, p.55 12. ^1 Jouhaud 1999, p.56 13. ^1 2 3 4 Dillien 2011, p.51 14. ^Jouhaud 1999, p.56 15. ^OO-AKG is the only member of this family of aircraft that Jouhaud (1999, p.59) notes as having been built in permanent monoplane configuration. 16. ^OO-APC (Hauet 1984, p.24). De Maeyer (1980, p.6) describes this as a conversion 17. ^Jouhaud 1999, p.56 References
5 : Belgian sport aircraft 1920–1929|Stampe et Vertongen aircraft|Biplanes|Single-engined tractor aircraft|Aircraft first flown in 1928 |
|||||||||||||||
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。