词条 | Tatra 138 |
释义 |
| image = Tatra 138 kipper3.jpg | name = Tatra 138 | manufacturer = Tatra | production = 1959-1971 | predecessor = Tatra 111 | successor = Tatra 148 | class = Heavy truck | body_style = Conventional | engine = See below | transmission = 5-speed manual + 2-speed auxiliary gearbox | wheelbase = | length = | width = | height = | weight = | related = | designer = }} The Tatra 138 was a truck produced in Czechoslovakia by the Tatra company. The immediate successor to the Tatra 111, the model introduced a number of new features while continuing the evolution of Tatra concept. The truck was produced from 1959 to 1971. {{Infobox automobile engine| image = | name = T 928 | aka = | manufacturer = Tatra | configuration = 75° V8 | production = | predecessor = | successor = | bore = {{convert|120|mm|in|1|abbr=on}} | stroke = {{convert|130|mm|in|1|abbr=on}} | displacement = 11,762 cc | length = | diameter = | width = | height = | weight = {{convert|595|kg|lb|0|abbr=on}} | block = Cast iron | head = Aluminium alloy | valvetrain = OHV | supercharger = | turbocharger = | fuelsystem = Direct injection | fueltype = Diesel | oilsystem = | coolingsystem = Air-cooled | power = {{convert|132.5|kW|hp|0|abbr=on}} @ 2000 rpm | specpower = | torque = {{convert|720|Nm|ftlbf|abbr=on}} @ 1200 rpm | compression = 16.5:1 | fuelcon = {{convert|36|L/100 km|abbr=on}} | specfuelcon = | oilcon = }} HistoryThe decision to replace the Tatra 111 was made in 1952 as part of a central state planning economy, where Tatra Kopřivnice was to produce 7-10 ton utility trucks. In 1956 at II. Czechoslovak Machinery Expo in Brno, Tatra exhibited 2 new models, the T137 and T138. Both vehicles had up to 70% of parts in common across the range. New design features were introduced, such as improvement in driver environment and usability e.g. hydraulic power steering, a compressed air assisted clutch and electro-pneumatic auxiliary gearbox gear selection. Design and technologyThe design was of central backbone tube construction with modular power train concept in 4×4, 4×2, 6×6, 6×4 and 6×2 configuration. Version 4×2, 6×4, and 6×2 were produced in very low quantity. The main advantages of central load carrying backbone tube are in its high torsion and bend strength protecting truck body against load stresses. The secondary advantage is that it houses all important parts of the drive train. In addition, it enables a concept of modular construction where designers and customers can specify 4, 6, wheel drive and various length and wheelbase combinations. EngineThe engine was located ahead of the front axle. It featured an air-cooled V8 75° with dry sump design and a new featured thermostat controlled cooling fan by engine oil temperature via hydraulic clutch drive to reduce noise and fuel consumption. The engine was also used in the OT-64 APC. ChassisCentral backbone tube, front and rear axles with independent swing half axles. The front suspension by torque arms (torsion bars) and hydraulic shock absorbers. The rear suspension by longitudinal half elliptic leaf springs. Front axle drive selectable on demand, differential locks electro-pneumatically controlled via dash switches.
Transmission
Brakes
BodyworkAll steel cab construction with various body builder equipment such as tippers, flatbeds, concrete mixers, tankers, cranes, excavators and firefighting. The vehicle had a top speed of 72 km/h, capable of water crossing depth {{convert|800|mm|in|0|abbr=on}}, with maximum payload of {{convert|12000|kg|lb|-2|abbr=on}} and could tow trailers up to {{convert|15000|kg|lb|-2|abbr=on}} GCM. ProductionTotal production exceeded 45,900. The Tatra T138 was exported to the USSR, Bulgaria, Romania, Poland, France, Austria, Yugoslavia and the Netherlands
External links{{commons category|Tatra 138|Tatra T138}}
4 : Tatra trucks|Cars of the Czech Republic|All-wheel-drive vehicles|Trucks of the Czech Republic |
随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。