词条 | David Pearson (computer scientist) |
释义 |
David Pearson is a British physicist and computer scientist. He has degrees in physics and theoretical physics from London University and Imperial College of Science and Technology, and in computer science from the University of Cambridge, where he did his postgraduate research in the resolution of three-dimensional matrices of second-order partial differential equation sets. Whilst still at university, he had also done early work for British Steel in the use of very high frequency oscillators in the measurement of surface roughness in a continuous strip steel rolling mill. He is an Associate of the Royal College of Science. He joined International Computers Limited in 1968 and became Head of Software Engineering, responsible for CADES, the development system for the ICL 2900 Series Operating System. In 1977 he was appointed Director of Advanced Development for Bell-Northern Research in Ottawa and Palo Alto California. In 1981 he joined the ranks of the early-80s hitech entrepreneurs and became the co-founder and President of Orcatech, one of the world's first intelligent graphics workstation companies. He went on to become the founding Chief Executive of the Strathclyde Institute in Glasgow, Scotland, Senior Director of Scottish Enterprise and Chief Executive for the economic development agency for Norfolk and Waveney. Before moving back to Canada, he spent three years as Chief Operating Officer of the Industrial Society, later to become the Work Foundation. He has Canadian and British citizenships. ICL CADESPearson started his career at International Computers Limited. He was involved in the early development work of the VME/B operating system for ICL’s 2900 Series. He was the innovator and architect of the CADES software engineering system[1][2] that was the foundation of VME/B development activities for over 20 years, and he led its development team until 1977. In designing the initial architecture of the CADES environment, Pearson looked to parallels with the leading hardware computer-aided design systems of the time, even attempting the use of graphics in the design process.[3][4] CADES was one of the first effective software engineering environments to be used for the development of large-scale software.[5][6][7] After 30 years, the system was still in use by Fujitsu to maintain the ICL operating system. Bell-Northern Research LaboratoriesAt the end of 1977, Pearson moved to Bell-Northern Research Laboratories in Ottawa, Canada, as Director of the laboratory's Advanced Development teams in Palo Alto, Raleigh NC and Ottawa.Whilst at BNR his primary focus was on leading research programmes working on heuristic design and development technologies for Northern Telecom digital communications products.[8][9][10] His key research programmes included artificial intelligence techniques applied to dense electronic designs, a virtual graphics machine global standard, software engineering techniques for high-performance Digital Multiplex System products, and computer-aided design strategies for locally intelligent products. During this time he was a science and technology adviser to the Canadian government and served as a member of the Science and Engineering Research Council for Canada. Orcatech IncIn 1981, with a small number of BNR colleagues, Pearson left to found Orcatech Inc., one of the first companies specialising in the design and development of raster-based high resolution intelligent graphics workstations for the computer-aided engineering market.[11] In the early 1980s, the availability of bit-slice and 16-bit microprocessors started to revolutionise personal computing and high resolution computer graphics terminals which now increasingly became intelligent, semi-standalone and standalone workstations. Graphics and application processing were increasingly migrated to the intelligence in the workstation or PC rather than continuing to rely on central mainframe and mini-computers. Pearson and his colleagues recognized the opportunity these microprocessors offered to graphics technology over the old technologies of storage tube and refresh vector graphics arrangements. Orcatech was at the leading edge of what is now recognized as modern high resolution computer graphics. The Orca 3000 was based on Motorola 68000 and AMD bit-slice processors and had Unix as its operating system. It was targeted squarely at the sophisticated end of the design engineering sector and included General Motors, Nortel, Boeing and Lockheed as clients. After developing a portfolio of successful workstation products and a rich portfolio of blue-chip clients, Orcatech went public, 20 months after its formation, on the Toronto Stock Exchange in 1983 at a valuation of over $100m, at that time one of the highest valued young technology companies ever to go public on the TSX. The Strathclyde InstituteIn 1986 Pearson moved back to the UK to become the first Chief Executive of the Strathclyde Institute, a research and consultancy company focusing on computer-based manufacturing systems and based in Glasgow, Scotland.[12][13] In establishing the Institute, Pearson's partners were the University of Strathclyde, under its charismatic and supportive Principal, Sir Graham Hills, the Scottish Development Agency, Hewlett Packard, Group Bull and Honeywell. During his six years as Chief Executive, the Institute advised some of the world’s leading companies in the areas of computer engineering, jet engine manufacture, automotive assembly, food and beverage processing, chemicals and pharmaceuticals. He was also the author of one of the definitive guides to Computer Integrated Manufacturing, published by the Financial Times.[14] Concurrently, Pearson was also Professor in Management at Strathclyde University in Glasgow and a government adviser on company startup policy, seed funding and operations. Economic developmentIn 1993 Pearson became Senior Director of Scottish Enterprise, the national body responsible for the economic development of Scotland, where he introduced and developed its focus on new business startups. After three years with Scottish Enterprise, Pearson took over as Chief Executive of the failing Norfolk and Waveney Enterprise Partnership, the economic development agency for East Anglia, which was successfully turned around and transformed.[15] Pearson also served as a member of the University of East Anglia Senate during this period. At the beginning of 2000, he was appointed Director and Chief Operating Officer of the Industrial Society, one of the world's oldest and most respected economic think tanks, later to become The Work Foundation, where he advised the private and public sectors on compliance, growth and employment futures. Whilst in London he was a frequent figure at the Royal Automobile Club on Pall Mall, where he stayed, dined and entertained clients. He retired in February 2003, after restructuring the organization, selling loss-making activities and adding 23 million pounds to the balance sheet.[16] On retiring from the Work Foundation, he moved to Pender Harbour, British Columbia, Canada, where he served the local boating community as Canadian Power and Sail Squadron Training Officer and Squadron Commander for a number of years. He continues to enjoy Premier League soccer, cats, collecting cars, early Baroque music, writing, and travelling between properties in Zermatt Switzerland, Hawaii and British Columbia. References1. ^B.C.Warboys "The IPSE 2.5 Project: Process Modelling as a basis for a support environment" International Conference on System Development Environments and Factories, May 1989, Berlin {{authority control}}{{DEFAULTSORT:Pearson, David John}}2. ^Martin Campbell-Kelly "ICL: A business and technical history" Clarendon Press, Oxford 1989 3. ^D.J.Pearson "CADES - Computer-aided development and evaluation system" Computer Weekly, 1973 4. ^D.J.Pearson and B.C.Warboys "Structural Modelling - A Philosophy" OSTC/IN/40 July 1970 5. ^G.D.Pratten and R.A.Snowden "CADES, support for the development of complex software" EUROCOMP,1976 6. ^M.A.Firth and Others "Improving a software development environment using object-oriented technology" TOOLS (8), 1992 7. ^B.W.Chatters, M.M.Lehman and Others "Modelling a software evolution process" Software Process: Improvement and Practice, September 2000 8. ^D.J.Pearson "The use and abuse of a software engineering system" National Computer Conference 1979 9. ^Don Leavitt "Development method review held useful" Computerworld June 1979 10. ^A.Bobas and J.Valahora "A design automation system for printed circuit board assemblies" Proceedings of the 14th Design Automation Conference, 1977 11. ^David Thomas "Knights of the New Technology: The Inside Story of Canada's Computer Elite" Longmans 1983 12. ^"CIM Institute at Strathclyde" Electronics and Power, Vol 33 Issue 5 May 1987 13. ^"Institute for Computer Integrated Manufacture" University of Strathclyde Archives 2012 14. ^David Pearson "Computer Integrated Manufacturing for the Engineering Industry" Financial Times Business Information Books Ltd., 1990 15. ^A.Newmann "Business United: A profile of David Pearson" Business Plus, April 1997 16. ^George Trefgarne "Work Foundation Chief Quits" Daily Telegraph 18 February 2003 13 : 1946 births|Living people|English computer scientists|International Computers Limited people|People from Birkenhead|Institute directors|Alumni of the Royal College of Science|Alumni of Imperial College London|Alumni of Churchill College, Cambridge|People associated with the University of East Anglia|British chief executives|Chief operating officers|People educated at Birkenhead Park School |
随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。