“Field, power, and root-power quantities”的意思、由来-开放百科全书

A power quantity is a power or a quantity directly proportional to power, e.g., energy density, acoustic intensity, and luminous intensity.^[1] Energy quantities may also be labelled as power quantities in this context.^[2]

A root-power quantity is a quantity such as voltage, current, sound pressure, electric field strength, speed, or charge density, the square of which, in linear systems, is proportional to power.^[3] The term root-power quantity was introduced in the {{section link|ISO 80000-1|Annex C}}; it replaces and deprecates the term field quantity.

It is essential to know which category a measurement belongs to when using decibels (dB) for comparing the levels of such quantities. A change of one bel in the level corresponds to a 10× change in power, so when comparing power quantities x and y, the difference is defined to be 10×log₁₀(y/x) decibel. With root-power quantities, however the difference is defined as 20×log₁₀(y/x) dB.^[3] In linear systems, these definitions allow the distinction between root-power quantities and power quantities to be ignored when specifying changes as levels: an amplifier can be described as having "3 dB" of gain without needing to specify whether voltage or power are being compared; for a given linear load (e.g. an {{val|8|ul=Ω}} speaker), such an increase will result in a 3 dB increase in both the sound pressure level and the sound power level at a given location near the speaker. Conversely, when ratios cannot be identified as either power or root-power quantities, the units neper (Np) and decibel (dB) cannot be sensibly used.

In the analysis of signals and systems using sinusoids, field quantities and root-power quantities may be complex-valued.^[4]^[5]^[6]

"Root-power quantity" vs. "field quantity"

In justifying the deprecation of the term "field quantity" and instead using "root-power quantity" in the context of levels, ISO 80000 draws attention to the conflicting use of the former term to mean a quantity that depends on the position,^[7] which in physics is called a field. Such a field is often called a field quantity in the literature, but is called a field here for clarity. Several types of field (such as the electromagnetic field) meet the definition of a root-power quantity, whereas others (such as the Poynting vector and temperature) do not. Conversely, not every root-power quantity is a field (such as the voltage on a loudspeaker).

See also

References

1. ^{{cite journal |last=Ainslie |first=Michael A. |url=http://acousticstoday.org/wp-content/uploads/2015/02/A-Century-of-Sonar.pdf |title=A Century of Sonar: Planetary Oceanography, Underwater Noise Monitoring, and the Terminology of Underwater Sound |journal=Acoustics Today |volume=11 |issue=1 |pages=12–19 |date=Winter 2015}}
2. ^ISO 80000:1-2009 § C.3
3. ^¹{{cite book|author=Brian C.J. Moore |title=Hearing |date=1995 |publisher=Academic Press |isbn=978-0-08-053386-5 |page=11 |url={{Google books |plainurl=yes |id=OywDx9pxCMYC |page=11 }} }}
4. ^ISO 80000-1:2009 § C.2
5. ^ISO 80000-3:2006 § 0.5
6. ^IEC 60027-3:2002
7. ^ISO 80000-1:2009 § C.2