1. History
    In ancient cultures  In continental Europe  In Britain 

2. Modern use

3. Area and volume
    Volume 

4. See also

5. References

{{Infobox unit
| name = rod
| standard = imperial/US units
| quantity = length
| units1 = imperial/US units
| inunits1 = {{frac|5|1|2}} yd
| units2 = metric (SI) units
| inunits2 = {{convert|5.5|yd|m|4|lk=on|disp=out}}
}}

The rod or perch or pole is a surveyor’s tool^[1] and unit of length exactly equal to {{frac|5|1|2}} yards, 16{{Fraction|1|2}} feet, {{Fraction|1|320}} of a statute mile or one-fourth of a surveyor's chain (approximately 5.0292 meters). The rod is useful as a unit of length because whole number multiples of it can form one acre of square measure. The 'perfect acre'^[2] is a rectangular area of 43,560 square feet, bounded by sides of length 660 feet and 66 feet (220 yards and 22 yards) or, equivalently, 40 rods and 4 rods. An acre is therefore 160 square rods.

A rod is the same length as a perch, also sometimes called a pole which measure using cordage^[3] or wood, slightly antedated the use of both rods and surveyors chains, made of more dimensionally regular materials. Its name derives from the Ancient Roman unit, the pertica.

The measure also has a relationship to the military pike of about the same size and both measures^[1] date from the sixteenth century,^[3] when that weapon was still utilized in national armies. The tool, normally configured as a metal rod with eye-ends (loops that could be hooked together), was used commonly until quite recently, when it was supplanted by electronic tools such as surveyor lasers (Lidar) and optical target devices for surveying lands. Surveyors rods and chains are still utilized in rough terrains with heavy overgrowth where laser or other optical measurements are difficult or impossible. In dialectal English the term lug has also been used.^[6][7]

History

In England, the perch was officially discouraged in favour of the rod as early as the 15th century;^[1] however, local customs maintained its use. In the 13th century perches were variously recorded in lengths of {{convert|18|ft|m|2}}, {{convert|20|ft|m|1}}, {{convert|22|ft|m|2}} and {{convert|24|ft|m|2}}; and even as late as 1820, a House of Commons report notes lengths of {{convert|16+1/2|ft|m|2}}, {{convert|18|ft|m|2}}, {{convert|21|ft|m|1}}, {{convert|24|ft|m|2}}, and even {{convert|25|ft|m|2}}.^[2] In Ireland, a perch was standardized at {{convert|21|ft|m|1}}, making an Irish chain, furlong and mile proportionately longer by 27.27% than the "standard" English measure.^[3]

Until English King Henry VIII seized the lands of the Roman Catholic Church in 1536,^[4] land measures as we now know them were essentially unknown.^[4] Instead a narrative system of landmarks and lists was used. Henry wanted to raise even more funds for his wars than he'd seized directly from church property (he'd also assumed the debts of Monasteries^[4]), and as James Burke writes and quotes in the book Connections: the English monk Richard Benese "produced a book on how to survey land using the simple tools of the time, a rod with cord carrying knots at certain intervals, waxed and resined against wet weather." Benese poetically described the measure of an acre in terms of a perch:^[5]

The practice of using surveyor's chains, and perch-length rods made into a detachable stiff chain, came about a century later when iron was a more plentiful and common material. A chain is a larger unit of length measuring {{convert|66|ft|4|lk=on}}, or 22 yards, or 100 links,^[6] or 4 rods (20.1168 meters). There are 10 chains or 40 rods in a furlong (eighth-mile), and so 80 chains or 320 rods in one statute mile (1760 yards, 1609.344 m, 1.609344 km); the definition of which was set by Royal surveyor (called the 'sworn viewer'^[7]) John Ogilby only after the Great Fire of London (1666).

An acre is defined as the area of 10 square chains (that is, an area of one chain by one furlong), and derives from the shapes of new-tech plows^[8] and the desire to quickly survey seized church lands into a quantity of squares for quick sales^[5] by Henry VIII's agents; buyers simply wanted to know what they were buying whereas Henry was raising cash for wars against Scotland and France.^[5] Consequently, the surveyor's chain and surveyor rods or poles (the perch) have been used for several centuries in Britain and in many other countries influenced by British practices such as North America and Australia. By the time of the industrial revolution and the quickening of land sales, canal and railway surveys, et al. Surveyor rods such as used by George Washington were generally made of dimensionally stable metal—semi-flexible drawn wrought iron linkable bar stock (not steel), such that the four folded elements of a chain were easily transportable through brush and branches when carried by a single man of a surveyor's crew. With a direct ratio to the length of a surveyor's chain and the sides of both an acre and a square (mile), they were common tools used by surveyors, if only to lay out a known plottable baseline in rough terrain thereafter serving as the reference line for instrumental (theodolite) triangulations.

The rod as a survey measure was standardized by Edmund Gunter in England in 1607 as one-fourth of a chain (of {{convert|66|ft|m|2}}), or {{convert|16+1/2|ft|m|2}} long.

In ancient cultures

The perch as a lineal measure in Rome (also decempeda) was {{convert|10|ft|m|2}}, and in France varied from 10 feet (perche romanie) to 22 feet (perche d'arpent—apparently {{frac|1|10}} of "the range of an arrow"—about 220 feet). To confuse matters further, by ancient Roman definition, an arpent equalled 120 Roman feet. The related unit of square measure was the scrupulum or decempeda quadrata, equivalent to about {{convert|8.76|m2|sqft|abbr=on}}.^[20]

In continental Europe

Units comparable to the perch, pole or rod were used in many European countries, with names that include {{lang-fr|perche}} and canne, {{lang-de|Ruthe}}, {{lang-it|canna}} and pertica, {{lang-pl|pręt}} and {{lang-es|canna}}. They were subdivided in many different ways, and were of many different lengths.

Based on data from the following:

• ^N - Niemann (Quedlinburg and Leipzig - 1830).^[23]

In Britain

In England, the rod is first defined in law by the Composition of Yards and Perches, one of the statutes of uncertain date from the late 13th to early 14th centuries.

The length of the chain was standardized in 1620 by Edmund Gunter at exactly four rods.^[24][25] Fields were measured in acres, which were one chain (four rods) by one furlong (in the United Kingdom, ten chains).^[26]

Bars of metal one rod long were used as standards of length when surveying land. The rod was still in use as a common unit of measurement in the mid-19th century, when Henry David Thoreau used it frequently when describing distances in his work, Walden.^[27]

A Scottish rood (ruid in Lowland Scots, ròd in Scottish Gaelic) was a land measurement of Anglo-Saxon origin. It was in greatest use in the South East of Scotland, and along the border, whereas in the north various other systems were used, based on the land's productivity, rather than actual area. Four Scottish roods made up a Scottish acre.

As in England, "rood" was also used to mean a cross or crucifix, whence "Holyrood" (the name of the new Scottish parliament), an Anglicisation of the Lowland Scots haly ruid (holy cross), and also "The Dream of the Rood".

Equivalent to -

• Scottish units:
  • {{1/4}} acre, 40 square falls
• Metric system
  • 12.7 ares, 1270 square metres
• Imperial system
  • 1.3 roods (English)

Modern use

The rod was phased out as a legal unit of measurement in the United Kingdom as part of a ten-year metrication process that began on 24 May 1965.^[28]

In the US, the rod, along with the chain, furlong, and statute mile (as well as the survey inch and survey foot) are based on the pre-1959 values for United States customary units of linear measurement. The Mendenhall Order of 1893 defined the yard as exactly {{frac|3600|3937}} meters, with all other units of linear measurement, including the rod, based on the yard.

In 1959, an international agreement (the International yard and pound agreement), defined the yard as the fundamental unit of length in the Imperial/USCU system, defined as exactly 0.9144 metres. However, the above-noted units, when used in surveying, may retain their pre-1959 values, depending on the legislation in each state.^[10]

Despite no longer being in widespread use, the rod is still employed in certain specialized fields. In recreational canoeing, maps measure portages (overland paths where canoes must be carried) in rods; typical canoes are approximately one rod long.^[30] The term is also in widespread use in the acquisition of pipeline easements, as the offers for an easement are often expressed on a "price per rod".^[11]

In the United Kingdom, the sizes of allotment gardens continue to be measured in square poles in some areas, sometimes being referred to simply as poles rather than square poles.

In Vermont, the default right-of-way width of state and town highways and trails is three rods (49.5 feet or 15.0876 m).^[33] Rods can also be found on the older legal descriptions of tracts of land in the United States, following the "metes and bounds" method of land survey;^[34] as shown in this actual legal description of rural real estate: {{quote|LEGAL DESCRIPTION: Commencing 45 rods East and 44 rods North of Southwest corner of Southwest 1/4 of Southwest 1/4; thence North 36 rods; thence East 35 rods; thence South 36 rods; thence West 35 rods to the place of beginning, Manistique Township, Schoolcraft County, Michigan.^[35]}}

Area and volume

The terms pole, perch, rod and rood have been used as units of area, and perch is also used as a unit of volume. As a unit of area, a square perch (the perch being standardized to equal {{frac|16|1|2}} feet, or {{frac|5|1|2}} yards) is equal to a square rod, {{convert|30+1/4|sqyd|m2|2|abbr=off|lk=out}} or {{frac|160}} acre. There are 40 square perches to a rood (e.g., a rectangular area one furlong (10 chains i.e. 40 rods) in length by one rod in width), and 160 square perches to an acre (an area one furlong by one chain (i.e. 4 rods)). This unit is usually referred to as a perch or pole even though square perch and square pole were the more precise terms. Confusingly, rod was also sometimes used as a unit of area to refer to a rood.

However, in the traditional French-based system in some countries, 1 square perche is 42.21 square metres.

As of August 2013 perches and roods are used as government survey units in Jamaica. They appear on most property title documents. The perch is also in extensive use in Sri Lanka, being favored even over the rood and acre in real estate listings there.^[12]

Perches were informally used as a measure in Queensland real estate until the early 21st century, mostly for historical gazetted properties in older suburbs.^[13]

Volume

A traditional unit of volume for stone and other masonry. A perch of masonry is the volume of a stone wall one perch ({{convert|16+1/2|ft|m|2|disp=or}}) long, {{convert|18|in|cm|1}} high, and {{convert|12|in|cm|1}} thick. This is equivalent to exactly {{convert|24+3/4|cuft|cuyd m3 l|abbr=off}}.

There are two different measurements for a perch depending on the type of masonry that is being built:

1. A dressed stone work is measured by the {{frac|24|3|4}}-cubic foot perch ({{convert|16+1/2|ft|m|2|disp=or}}) long, {{convert|18|in|cm|1}} high, and {{convert|12|in|cm|1}} thick. This is equivalent to exactly {{convert|24+3/4|cuft|cuyd m3|6|abbr=off}}.
2. a brick work or rubble wall made of broken stone of irregular size, shape and texture, made of undressed stone, is measured by the ({{convert|16+1/2|ft|m|2|disp=or}}) long, {{convert|12|in|cm|1}} high, and {{convert|12|in|cm|1}} thick. This is equivalent to exactly {{convert|16+1/2|cuft|cuyd m3|6|abbr=off}}.^&91;14&93;

See also

• Chain (unit)
• Furlong
• Imperial units
• English units
• United States customary units
• Anthropic units

References

^{[23][24][25][26][27][28]}
}}{{DEFAULTSORT:Rod (Unit)}}

• Canon FD 135 mm f/2.5 S.C.
• Canon FD 135 mm f/3.5
• Canon FD 135 mm f/3.5 S.C. (I)
• Canon FD 135 mm f/3.5 S.C. (II)
• Canon FD 135 mm lens
• Canon FD 200mm
• Canon FD 200 mm
• Canon FD 200 mm 1:1.8
• Canon FD 200mm 1:1.8
• Canon FD 200 mm 1:2.8
• Canon FD 200 mm 1:2.8 S.S.C.
• Canon FD 200mm 1:2.8 S.S.C.
• Canon FD 200mm 1:4
• Canon FD 200 mm 1:4
• Canon FD 200 mm 1:4.0
• Canon FD 200mm 1:4.0
• Canon FD 200mm 1:4.0 SSC
• Canon FD 200 mm 1:4.0 SSC
• Canon FD 200mm 1:4.0 S.S.C.
• Canon FD 200mm 1:4 S.S.C.
• Canon FD 200 mm 1:4 S.S.C.
• Canon FD 200mm f/1.8
• Canon FD 200mm F/1.8
• Canon FD 200 mm F/1.8
• Canon FD 200 mm F1.8