“Kellner-Béchereau EC.4”的意思、由来-开放百科全书

词条

Kellner-Béchereau EC.4

释义

Design and development
Specifications (EC.4)
References

name=Kellner-Béchereau EC.4

image=Kellner-Béchereau ED.5 photo L'Aerophile February 1938.jpg

caption=ED.5

}}{{Infobox Aircraft Type

type=Side by side basic trainer

national origin=France

manufacturer=Avions Kellner-Béchereau

designer=Louis Béchereau

first flight=1937

introduced=

retired=

status=

primary user=

more users=

produced=

number built=1

program cost=

unit cost=

developed from=

variants with their own articles=
}}

The Kellner-Béchereau EC.4 and Kellner-Béchereau ED.5 were a pair of French training aircraft with side-by-side seating and a novel "double wing" patented by their designer, Louis Béchereau. The principal difference was that the EC.4 had an all-wood structure whereas the ED.5 was all-metal. Both were single-engine, mid-wing cantilever monoplanes.

Design and development

In the 1930s the veteran aircraft designer Louis Béchereau set up Avions Kellner-Béchereau, a collaboration with the well-known automobile coach builders Kellner. In 1936–37 this company built a short series of small monoplanes exploiting one of Béchereau's patents, a full span lateral division of the wing into two sections forming a "double wing", a little like that used by Junkers but with a more equal division of area. The wing was first tested on the single-seat Kellner-Béchereau E.1 on 1936, which was followed by two larger and more powerful two-seaters, the EC.4 and ED.5. Both of these were designed to meet the French Air Ministry's requirement for a pre-military trainer aircraft to be used by the clubs set up in the "Aviation Populaire" programme.

Like the E.1, the EC.4 was a wooden aircraft with spruce frames and plywood covering. It was a mid-wing cantilever monoplane with straight, thick section, constant chord wings of quite high aspect ratio (9.45). The lateral division was at about 65% chord, with the rear part joined to the front with conspicuous V-shaped faired underwing hinges. In normal flight the two parts were close together and the rear sections acted both as lifting surface and, differentially, ailerons but they could also be lowered together as slotted flaps, moving rearwards as well as down to produce a slot between fore and aft parts.

The fuselage was rectangular in cross section, with an open cockpit seating two side-by-side at the wing trailing edge and an inverted in-line 40 kW (60 hp) Train T6 in the nose. A straight edged tailplane was mounted on the upper fuselage longerons and carried elevators with a small cut-out for rudder movement. The latter, mounted on a very narrow fin, was rectangular and extended to the bottom of the fuselage. The rear control surfaces were fabric covered. The EC.4 had a conventional undercarriage with cantilever main legs hinged on the lower longerons, rubber sprung inside the fuselage.

The second design, the ED.5 was similar to the EC.4 except that it was a metal aircraft. The forward part of the wing and the whole fuselage were constructed in a process also patented by Béchereau. It involved the use of wooden formers, shaped to the required skin profile but with cut-outs for strengthening members such as ribs. These were placed into the mould before the duralumin skin was fitted over the former and held down with leather belts. Once secured, the internal pieces and skin could be joined, still in the mould, by screws or rivets. The rear wing surfaces were also metal, though more conventionally built.

The dimensions of the EC.4 and ED.5 were the same, as were seating, engine and undercarriage. The loaded weight of the metal aircraft was 25 kg (55 lb) lower. Performance was similar, with identical maximum speeds; the lighter ED.5 had a 5 km/h (3 mph) lower stalling speed but a 55 km (35 mi) shorter range.

The Kellner-Béchereau designs were not ordered for the Aviation Populaire programme, the Air Ministry preferring the Caudron C.270 and the Salmson Cri-Cri which were both bought in large numbers. Instead, Kellner-Béchereau, along with other manufacturers, built the Cri-Cri under licence.^[6]

Specifications (EC.4)

{{Aircraft specs
|ref=Jane's All the World's Aircraft 1938
|prime units?=met

|perfhide=
|max speed kmh=160
|max speed mph=
|max speed kts=
|max speed note=
|max speed mach=
|cruise speed kmh=
|cruise speed mph=
|cruise speed kts=
|cruise speed note=
|stall speed kmh=65
|stall speed mph=
|stall speed kts=
|stall speed note=
|never exceed speed kmh=
|never exceed speed mph=
|never exceed speed kts=
|never exceed speed note=
|minimum control speed kmh=
|minimum control speed mph=
|minimum control speed kts=
|minimum control speed note=
|range km=
|range miles=525
|range nmi=
|range note=
|combat range km=
|combat range miles=
|combat range nmi=
|combat range note=
|ferry range km=
|ferry range miles=
|ferry range nmi=
|ferry range note=
|endurance=
|ceiling m=
|ceiling ft=
|ceiling note=
|g limits=
|roll rate=
|glide ratio=
|climb rate ms=2.0
|climb rate ftmin=
|climb rate note=
|time to altitude=
|sink rate ms=
|sink rate ftmin=
|sink rate note=
|lift to drag=
|wing loading kg/m2
|wing loading lb/sqft=
|wing loading note=
|power/mass=
|thrust/weight=
|more performance=
|avionics=
}}{{aircontent
|see also=
|related=
|similar aircraft=
|lists=
}}

References

1. ^¹{{cite book |title=Jane's All the World's Aircraft 1938 |last= Grey |first= C.G. |coauthors= |edition= |year=1972|publisher= |location= |isbn=|page=132c }}

^[1]
}}{{Kellner-Béchereau aircraft}}{{DEFAULTSORT:Kellner-Bechereau EC.4}}

4 : French civil trainer aircraft 1930–1939|Kellner-Béchereau aircraft|Mid-wing aircraft|Aircraft first flown in 1937

随便看

开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。