请输入您要查询的百科知识:

 

词条 Circular sector
释义

  1. Area

  2. Perimeter

  3. Arc length

  4. Chord length

  5. See also

  6. References

A circular sector or circle sector (symbol: ), is the portion of a disk enclosed by two radii and an arc, where the smaller area is known as the minor sector and the larger being the major sector. In the diagram, θ is the central angle in radians, the radius of the circle, and is the arc length of the minor sector.

A sector with the central angle of 180° is called a half-disk and is bounded by a diameter and a semicircle. Sectors with other central angles are sometimes given special names, these include quadrants (90°), sextants (60°) and octants (45°), which come from the sector being one 4th or 6th or 8th part of a full circle, respectively.

The angle formed by connecting the endpoints of the arc to any point on the circumference that is not in the sector is equal to half the central angle.

Area

The total area of a circle is {{pi}}r{{isup|2}}. The area of the sector can be obtained by multiplying the circle's area by the ratio of the angle and 2{{pi}} (because the area of the sector is proportional to its angle, and 2{{pi}} is the angle for the whole circle, in radians):

The area of a sector in terms of L can be obtained by multiplying the total area {{pi}}r{{isup|2}} by the ratio of L to the total perimeter 2{{pi}}r.

Another approach is to consider this area as the result of the following integral :

Converting the central angle into degrees gives

Perimeter

The length of the perimeter of a sector is the sum of the arc length and the two radii:

where θ is in radians.

Arc length

Formula for Arc Length

where S represents the arc length, r represents the radius of the circle and θ represents the angle in radians made by the arc at the centre of the circle.

If the value of angle is given in degrees, then we can also use the following formula:

Chord length

The length of a chord formed with the extremal points of the arc is given by

where C represents the chord length, R represents the radius of the circle, and θ represents the angular width of the sector in radians.

See also

  • Circular segment – the part of the sector which remains after removing the triangle formed by the center of the circle and the two endpoints of the circular arc on the boundary.
  • Conic section

References

  • Gerard, L. J. V. The Elements of Geometry, in Eight Books; or, First Step in Applied Logic, London, Longman's Green, Reader & Dyer, 1874. [https://books.google.com/books?id=4jMDAAAAQAAJ&pg=PA285 p. 285]

1 : Circles

随便看

 

开放百科全书收录14589846条英语、德语、日语等多语种百科知识,基本涵盖了大多数领域的百科知识,是一部内容自由、开放的电子版国际百科全书。

 

Copyright © 2023 OENC.NET All Rights Reserved
京ICP备2021023879号 更新时间:2024/9/22 1:40:45