| 词条 | Conglomerate (geology) |
| 释义 |
|name=Conglomerate |type=Sedimentary |image=lehigh conglom.jpg |caption=Boulder of conglomerate with cobble-sized clasts. Rock hammer for scale. |composition= }} Conglomerate ({{IPAc-en|k|ə|n|ˈ|ɡ|l|ɒ|m|ər|ᵻ|t}}) is a coarse-grained clastic sedimentary rock that is composed of a substantial fraction of rounded to subangular gravel-size clasts, e.g., granules, pebbles, cobbles, and boulders, larger than {{convert|2|mm|in|abbr=on}} in diameter. Conglomerates form by the consolidation and lithification of gravel. Conglomerates typically contain finer grained sediment, e.g., either sand, silt, clay or combination of them, called matrix by geologists, filling their interstices and are often cemented by calcium carbonate, iron oxide, silica, or hardened clay. The size and composition of the gravel-size fraction of a conglomerate may or may not vary in composition, sorting, and size. In some conglomerates, the gravel-size class consist almost entirely of what were clay clasts at the time of deposition. Conglomerates can be found in sedimentary rock sequences of all ages but probably make up less than 1 percent by weight of all sedimentary rocks. In terms of origin and depositional mechanisms, they are closely related to sandstones and exhibit many of the same types of sedimentary structures, e.g., tabular and trough cross-bedding and graded bedding.[1][2][3] Classification of conglomeratesConglomerates may be named and classified by the:
The classification method depends on the type and detail of research being conducted.[1][2][4] A sedimentary rock composed largely of gravel is first named according to the roundness of the gravel. If the gravel clasts that comprise it is largely well-rounded to subrounded, it is a conglomerate. If the gravel clasts that comprise it are largely angular, it is a breccia. Such breccias can be called sedimentary breccias to differentiate them from other types of breccia, e.g. volcanic and fault breccias. Sedimentary rocks that contain a mixture of rounded and angular gravel clasts are sometimes called breccio-conglomerate.[2][4] TextureConglomerates are rarely composed entirely of gravel-size clasts. Typically, the space between the gravel-size clasts is filled by a mixture composed of varying amounts of silt, sand, and clay, known as matrix. If the individual gravel clasts in a conglomerate are separated from each other by an abundance of matrix such that they are not in contact with each other and float within the matrix, it is called a paraconglomerate. Paraconglomerates are also often unstratified and can contain more matrix than gravel clasts. If the gravel clasts of a conglomerate are in contact with each other, it is called an orthoconglomerate. Unlike paraconglomerates, orthoconglomerates are typically cross-bedded and often well-cemented and lithified by either calcite, hematite, quartz, or clay.[1][2][4] The differences between paraconglomerates and orthoconglomerates reflect differences in how they are deposited. Paraconglomerates are commonly either glacial tills or debris flow deposits. Orthoconglomerates are typically associated with aqueous currents.[1][2][4] Clast compositionConglomerates are also classified according to the composition of their clasts. A conglomerate or any clastic sedimentary rock that consists of a single rock or mineral is known as either a monomict, monomictic, oligomict, or oligomictic conglomerate. If the conglomerate consists of two or more different types of rocks, minerals, or combination of both, it is known as either a polymict or polymictic conglomerate. If a polymictic conglomerate contains an assortment of the clasts of metastable and unstable rocks and minerals, it called either a petromict or petromictic conglomerate.[2][3][5] In addition, conglomerates are classified by source as indicated by the lithology of the gravel-size clasts If these clasts consist of rocks and minerals that are significantly different in lithology from the enclosing matrix and, thus, older and derived from outside the basin of deposition, the conglomerate is known as an extraformational conglomerate. If these clasts consist of rocks and minerals that are identical to or consistent with the lithology of the enclosing matrix and, thus, penecontemporaneous and derived from within the basin of deposition, the conglomerate is known as an intraformational conglomerate.[2][3][5] Two recognized types of type of intraformational conglomerates are shale-pebble and flat-pebble conglomerates.[5] A shale-pebble conglomerate is a conglomerate that is composed largely of clasts of rounded mud chips and pebbles held together by clay minerals and created by erosion within environments such as within a river channel or along a lake margin.[6] Flat-pebble conglomerates (edgewise conglomerates) are conglomerates that consist of relatively flat clasts of lime mud created by either storms or tsunami eroding a shallow sea bottom or tidal currents eroding tidal flats along a shoreline.[7] Clast sizeFinally, conglomerates are often differentiated and named according to the dominant clast size comprising them. In this classification, a conglomerate composed largely of granule-size clasts would be called a granule conglomerate; a conglomerate composed largely of pebble-size clasts would be called a pebble conglomerate; and a conglomerate composed largely of cobble-size clasts would be called a cobble conglomerate.[4][5] Sedimentary environmentsConglomerates are deposited in a variety of sedimentary environments. Deepwater marineIn turbidites, the basal part of a bed is typically coarse-grained and sometimes conglomeratic. In this setting, conglomerates are normally very well sorted, well-rounded and often with a strong A-axis type imbrication of the clasts.[8] Shallow marineConglomerates are normally present at the base of sequences laid down during marine transgressions above an unconformity, and are known as basal conglomerates. They represent the position of the shoreline at a particular time and are diachronous.[9] FluvialConglomerates deposited in fluvial environments are typically well rounded and well sorted. Clasts of this size are carried as bedload and only at times of high flow-rate. The maximum clast size decreases as the clasts are transported further due to attrition, so conglomerates are more characteristic of immature river systems. In the sediments deposited by mature rivers, conglomerates are generally confined to the basal part of a channel fill where they are known as pebble lags.[10] Conglomerates deposited in a fluvial environment often have an AB-plane type imbrication. AlluvialAlluvial deposits form in areas of high relief and are typically coarse-grained. At mountain fronts individual alluvial fans merge to form braidplains and these two environments are associated with the thickest deposits of conglomerates. The bulk of conglomerates deposited in this setting are clast-supported with a strong AB-plane imbrication. Matrix-supported conglomerates, as a result of debris-flow deposition, are quite commonly associated with many alluvial fans. When such conglomerates accumulate within an alluvial fan, in rapidly eroding (e.g., desert) environments, the resulting rock unit is often called a fanglomerate.[8] GlacialGlaciers carry a lot of coarse-grained material and many glacial deposits are conglomeratic. Tillites, the sediments deposited directly by a glacier, are typically poorly sorted, matrix-supported conglomerates. The matrix is generally fine-grained, consisting of finely milled rock fragments. Waterlaid deposits associated with glaciers are often conglomeratic, forming structures such as eskers.[10]ExamplesAn example of conglomerate can be seen at Montserrat, near Barcelona. Here, erosion has created vertical channels that give the characteristic jagged shapes the mountain is named for (Montserrat literally means "jagged mountain"). The rock is strong enough to use as a building material, as in the Santa Maria de Montserrat Abbey. Another example, the Crestone Conglomerate, occurs in and near the town of Crestone, at the foot of the Sangre de Cristo Range in Colorado's San Luis Valley. The Crestone Conglomerate consists of poorly sorted fanglomerates that accumulated in prehistoric alluvial fans and related fluvial systems. Some of these rocks have hues of red and green. Conglomerate cliffs are found on the east coast of Scotland from Arbroath northwards along the coastlines of the former counties of Angus and Kincardineshire. Dunnottar Castle sits on a rugged promontory of conglomerate jutting into the North Sea just south of the town of Stonehaven. Conglomerate may also be seen in the domed hills of Kata Tjuta, in Australia's Northern Territory. In the nineteenth century a thick layer of Pottsville conglomerate was recognized to underlie anthracite coal measures in Pennsylvania.[11] Examples on MarsOn Mars, slabs of conglomerate have been found at an outcrop named "Hottah", and have been interpreted by scientists as having formed in an ancient streambed. The gravels, which were discovered by NASA's Mars rover Curiosity, range from the size of sand particles to the size of golf balls. Analysis has shown that the pebbles were deposited by a stream that flowed at walking pace and was ankle- to hip-deep.[12] MetaconglomerateMetamorphic alteration transforms conglomerate into metaconglomerate.[3]See also
References1. ^1 2 3 Boggs, S. (2006) Principles of Sedimentology and Stratigraphy., 2nd ed. Prentice Hall, New York. 662 pp. {{ISBN|0-13-154728-3}} 2. ^1 2 3 4 5 6 Friedman, G.M. (2003) Classification of sediments and sedimentary rocks. In Gerard V. Middleton, ed., pp. 127-135, Encyclopedia of Sediments & Sedimentary Rocks, Encyclopedia of Earth Science Series. Kluwer Academic Publishers, Boston, Massachusetts. 821 pp. {{ISBN|978-1-4020-0872-6}} 3. ^1 2 3 Neuendorf, K.K.E., J.P. Mehl, Jr., and J.A. Jackson, eds. (2005) Glossary of Geology (5th ed.). Alexandria, Virginia, American Geological Institute. 779 pp. {{ISBN|0-922152-76-4}} 4. ^1 2 3 4 Nichols, G. (2009) Sedimentology and Stratigraphy, 2nd ed. John Wiley & Sons Ltd, Chichester, West Sussex, United Kingdom. 419 pp. {{ISBN|978-1-4051-9379-5}} 5. ^1 2 3 Tucker, M.E. (2003) Sedimentary Rocks in the Field, 3rd ed. John Wiley & Sons Ltd,West Sussex, England. 234 pp. {{ISBN|0-470-85123-6}} 6. ^Williams, G.D. (1966) Origin of Shale-Pebble Conglomerate. American Association of Petroleum Geologist Bulletin. vol. 50, no. 3, pp. 573-577. 7. ^Flugel, E. (2010) Microfacies of Carbonate Rocks: Analysis, Interpretation and Application, 2nd ed. Springer-Verlag, Berlin, Germany. 984 pp. {{ISBN|978-3-642-03795-5}} 8. ^1 Walker, R.G. 1979. Facies Models. Reprinted with revisions from a series of papers in Geoscience Canada, 1976–1979, Geological Association of Canada, 211pp. 9. ^[https://books.google.com/books?id=qWswLfjQFxMC&pg=PA135&dq=%22marine+transgression%22++conglomerates&lr=&ei=9vcrSrWhOZS0zgT2yuizBw#PPA135,M1 Seibold, E. & Berger, W.H. 1996. The Sea Floor: an introduction to Marine Geology, Springer, 356pp. ] 10. ^1 [https://books.google.com/books?id=voakD8HV9DgC&pg=PA65&dq=fluvial+conglomerates&lr=&ei=CPUrSvrCEILezASo-qHuDg#PPA69,M1 Tucker, M.E. 2001. Sedimentary petrology, 3rd edition, WileyBlackwell, 272pp.] 11. ^{{cite web|url=http://www.libraries.psu.edu/emsl/guides/X/Schuylkill.jpg|title=Geologic map of Schuylkill County|year=1884|deadurl=yes|archiveurl=https://web.archive.org/web/20080411051315/http://www.libraries.psu.edu/emsl/guides/X/Schuylkill.jpg|archivedate=2008-04-11|df=}} 12. ^{{cite web | url=http://www.jpl.nasa.gov/news/news.php?release=2012-305 | title=NASA Rover Finds Old Streambed on Martian Surface | publisher=Jet Propulsion Laboratory / California Institute of Technology | work=News | date=27 September 2012 | accessdate=28 February 2016}} External links{{commons category|Conglomerate}}
2 : Sedimentary rocks|Conglomerates (geology) |
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。