| 词条 | Statutory liquidity ratio |
| 释义 |
Statutory liquidity ratio (SLR) is the Indian government term for the reserve requirement that the commercial banks in India are required to maintain in the form of cash, gold reserves, RBI approved securities before providing credit to the customers. Statutory liquidity ratio is determined by Reserve Bank of India maintained by banks in order to control the expansion Go to the safe zone The SLR is determined by a percentage of total demand and time liabilities. Time liabilities refer to the liabilities which the commercial banks are liable to pay to the customers after a certain period mutually agreed upon, and demand liabilities are such deposits of the customers which are payable on demand. An example of time liability is a six month fixed deposit which is not payable on demand but only after six months. An example of demand liability is a deposit maintained in a saving account or current account that is payable on demand through a withdrawal form such as a cheque. The SLR is commonly used to control inflation and fuel growth, by increasing or decreasing it respectively. This counter acts by decreasing or increasing the money supply in the system respectively. Indian banks’ holdings of government securities are now close to the statutory minimum that banks are required to hold to comply with existing regulation. When measured in rupees, such holdings decreased for the first time in a little less than 40 years (since the nationalisation of banks in 1969) in 2005–06. Currently{{when|date=January 2018}} it is 19.25 percent. UsageSLR is used by bankers and indicates the minimum percentage of deposits that the bank has to maintain in form of gold, cash or other approved securities. Thus, we can say that it is ratio of cash and some other approved liability (deposits). It regulates the credit growth in India. The liabilities that the banks are liable to pay within one month's time, due to completion of maturity period, are also considered as time liabilities. The maximum limit of SLR is 40% and minimum limit of SLR is 0 In India, Reserve Bank of India always determines the percentage of SLR. There are some statutory requirements for temporarily placing the money in government bonds. Following this requirement, Reserve Bank of India fixes the level of SLR. However, as most banks currently keep an SLR higher than required (>26%) due to lack of credible lending options, near term reductions are unlikely to increase liquidity and are more symbolic.[1][2] The SLR is fixed for a number of reasons. The chief driving force is increasing or decreasing liquidity which can result in a desired outcome. A few uses of mandating SLR are:
If any Indian bank fails to maintain the required level of the statutory liquidity ratio, then it becomes liable to pay penalty to Reserve Bank of India. The defaulter bank pays penal interest at the rate of 3% per annum above the bank rate, on the shortfall amount for that particular day. However, according to the Circular released by the Department of Banking Operations and Development, Reserve Bank of India, if the defaulter bank continues to default on the next working day, then the rate of penal interest can be increased to 5% per annum above the bank rate. This restriction is imposed by RBI on banks to make funds available to customers on demand as soon as possible. Gold and government securities (or gilts) are included along with cash because they are highly liquid and safe assets. The RBI can increase the SLR to control inflation, suck liquidity in the market, to tighten the measure to safeguard the customers' money. Decrease in SLR rate is done to encourage growth. In a growing economy banks would like to invest in stock market, not in government securities or gold as the latter would yield less returns. One more reason is long term government securities (or any bond) are sensitive to interest rate changes. However, in an emerging economy, interest rate change is a common activity. Value and formulaThe quantum is specified as some percentage of the total demand and time liabilities ( i.e. the liabilities of the bank which are payable on demand anytime, and those liabilities which are accruing in one months time due to maturity) of a bank. SLR rate = (liquid assets / (demand + time liabilities)) × 100% This percentage is fixed by the Reserve Bank of India. The maximum limit for the SLR was 40% in India.{{when|date=January 2018}}[3] Following the amendment of the Banking regulation Act (1949) in January 2017, the floor rate of 20.75% for SLR was removed. As on 28 February 2019, the SLR is 19.25%. See also
References1. ^{{cite news | url=https://www.ndtv.com/business/50-basis-points-cut-in-slr-is-symbolic-deven-choksey-736615 | title=50 Basis Points Cut in SLR is Symbolic: Deven Choksey | date=3 February 2015 | publisher=NDTV | accessdate=14 March 2019 }} 2. ^{{cite news | url=https://www.ndtv.com/business/rbi-pushes-banks-for-lower-lending-rates-736647 | title=RBI Pushes Banks for Lower Lending Rates | date=3 February 2015 | publisher=NDTV | accessdate=14 March 2019 }} 3. ^Master Circular of RBI to banks http://rbidocs.rbi.org.in/rdocs/notification/PDFs/55663.pdf Further reading
|url=http://www.rbi.org.in/scripts/BS_ViewMasCirculardetails.aspx?id=6508 |title=Latest RBI Master Circular on Cash Reserve Ratio (CRR) and Statutory Liquidity Ratio (SLR) |date=1 July 2011}}.
4 : Banking|Monetary policy|Financial ratios|Financial economics |
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。