| 词条 | Nissan A engine |
| 释义 |
The Nissan A series of internal combustion gasoline engines have been used in Datsun, Nissan and Premier brand vehicles. Displacements of this four-stroke engine family ranged from 1.0-liter to 1.5-liter and have been produced from 1967 to the present. It is a small-displacement four-cylinder straight engine. It uses a lightweight cast iron block and an aluminum cylinder head, with overhead valves actuated by pushrods. The Nissan A engine design is a refined, quiet and durable gasoline engine. It appears to be a modern replacement of the earlier iron-headed Nissan E engine and is of similar dimensions. The 1960s E series was an all-new design from newly acquired Aichi Kokuki, and integrated Nissan's improvements to the BMC A-Series engine design of the 1950s (Nissan was a licensee of Austin Motor Company technology), mainly comprising changing the camshaft from the left side to the right side so removing the intrusion of the pushrods from the porting allowing 8 individual ports instead of 5 originally, and moving the oil pump from the rear of the camshaft to the right side of the block. As production continued, 1974 and newer A-series engines had different block castings, with relocated motor mount bosses. {{anchor|A10}}A10: the first A-series engineThe A10 is a 1.0-liter (988 cc) engine, released in September 1966 in the 1967 model year Datsun 1000. The A10 featured a three main bearing crankshaft. Bore was 73 mm and stroke was 59 mm (same as the Nissan C engine). With a two-barrel Hitachi carburetor and an 8.5 to 1 compression ratio this engine produced 62 bhp (46 kW) at 6,000 rpm and 61.5 lb·ft. of torque (83 Nm). The Datsun 1000 Coupe, introduced in Sept 1968, was equipped with an uprated A10 engine boasting a free flowing dual outlet exhaust manifold with increased compression, now 9 to 1. With a revised carburetor, this engine produced 66 bhp (49 kW). Later versions of A10 produced 59 hp (SAE). A belt-driven SOHC version of the A10 was built as the E10 into the early nineties.
A12 (1200): further refinementsThe A12 is a 1.2-liter ({{convert|1171|cc|abbr=on}}) engine with {{convert|73|mm|abbr=on}} bore, like the previous A10 engine, but stroke increased to {{convert|70|mm|abbr=on}}. With five main bearings on a forged steel crankshaft, the engine is extremely smooth and durable. The two-barrel (twin-choke) Hitachi carburettor was significantly improved with the addition of a power valve circuit. The A12 engine produced {{convert|70|hp|kW|0|abbr=on}} and {{convert|70|ftlb|Nm|0|abbr=on|lk=on}} torque. A special version of the A12 called the "A12 GX" engine, was available (A12GX or A12T for front-wheel drive applications). With twin Hitachi sidedraft carburetors, a longer duration camshaft and 10:1 compression ratio, it delivered {{convert|83|hp|kW|0|abbr=on}} @6400 rpm, up 20% from standard A12 engines. The GX engine was offered in Japanese Domestic Market Nissan Sunny 1200 GX sedans and coupes. The identical specification A12T engine was offered in the front-wheel-drive Nissan Cherry X-1. [1] An overbored version of the A12 was used in period race cars, including Nissan factory (works) racing Sunnys. Many were overbored from the original {{convert|73|mm|abbr=on}} to {{convert|76.76|mm|abbr=on}} using Tomei forged pistons for a displacement of {{convert|1296|cc|abbr=on}}, while others used {{convert|76|mm|abbr=on}} Datsun Competition forged pistons, for a displacement of {{convert|1270|cc|abbr=on}}. These legendary engines competed in Japan's Touring Sedan (TS) class races against the 1200s archrival Toyota Starlet. [2] Perhaps the most interesting variety of A series engines was the AY12 engine. This was a special race-only Nissan factory (works) racing version with a crossflow cylinder head.[3] The AY12 was used in an under {{convert|1300|cc|CID|0|abbr=on}}-class with a {{convert|76|-|76.8|mm|abbr=on}} bore diameter. The intake valve was {{convert|40|-|41|mm|2|abbr=on}} and exhaust valves were {{convert|33|-|34|mm|2|abbr=on}}. The pistons were also a special design and the valve rocker system was different from the standard A12 due to the crossflow layout.{{clarifyme|date=February 2018|reason=were the higher values for the race-only parts, or what?}}
1974 redesignFor the 1974 model year, the A engine was modified, and all subsequent A engines use the new block style. Since there was increasing need for accessories like air conditioning, anti-pollution air pumps and the like, the distributor was moved from the front side of the engine to the middle of the block to make room for these accessories. Additionally, the motor mount positions were moved slightly. Nissan introduced its emission control technology, called NAPS (Nissan NAPS) with the redesign. This "new" A12 retained the same bore, stroke and most other specifications of the previous A12.
A12AThe A12A is a 1.2-liter (1,237 cc) engine. It used a casting similar to the A12 and same stroke, but used a 75 mm bore (up from 73 mm), for an increase of 66 cc capacity. It too was of an overhead valve design. Also used a different(stronger) conrod with a larger diameter gudgeon pin. The A12A shared a common block and crankshaft with the redesigned A12 and A13 engines.
A13 (1974): the first tall-deck A engineThe 1974 A13 is a 1.3-liter (1288 cc) engine with 73 mm bore like the A10 and A12 above, but stroke increased to 77 mm, and compression ratio reduced to 8.5:1. This engine features a "tall-block" with a deck height 15 mm (0.59 inch) higher than previous A-series engines. Applications:
Making this engine a {{Convert|75|hp|kW|0|abbr=on}}. An important fact is that this model (B210) just existed in 1974. A13 (1979–1982) – short-deck engineThe redesigned A13 is a 1.3-liter engine. It used the same basic block casting as the A12 and same stroke of 70 mm, but used a 76 mm bore for a displacement of 1,270 cc. This engine was also used as the basis for a number of Formula Pacific and Formula 3 race engines.
{{anchor|A14}}A14{{outofdate|date=February 2018}}The A14 is a 1.4-liter (1,397 cc) engine produced from the 1975 Model year through 2008. The bore was increased to 76 mm, up from 73 mm of previous A-series engines. Like the previous A13 engine, the A14 is a "tall-block" variant. It was produced in various ratings from 50 Horsepower to {{Convert|85|hp|kW|0|abbr=on}}. A twin-carburetor "GX" version of this engine (A14T) was available in some markets.
A fuel-injected version (A14E) was offered in Asian markets in the B310. {{anchor|A15}}A15 – Stroker motorThe A15 is a 1.5-liter (1,487 cc) engine produced from 1979 through 1998 (and still in production in 2009 for the Malaysian built Vanette C22). The stroke was increased by 5 mm from the A14 engine to now measure 82 mm, while the bore remained 76 mm. It produces {{Convert|80|hp|kW|0|abbr=on}}. It used only a different block casting number, but retained the same "tall-block" deck height, measurements and BMEP as the A14. In the Nissan B120 Sunny "RoadStar" truck it is capable of 49 mpg (17,3 km/L).[8] A fuel-injected version of the A15 (A15E) was offered in Asian markets.
References1. ^Datsun 1200.com 2. ^Datsun 1200.com 3. ^lid=2521 Datsun 1200.com (photo) 4. ^1 {{citation | title = Nissan Sunny Vanette (catalog) | publisher = Nissan Motor Co | page = 19 | id = 8101D }} 5. ^{{citation | title = Datsun Sunny (catalog) | publisher = Nissan Motor Co | page = 29 | id = 8053T711 }} 6. ^{{Cite journal | title = Datsun Cherry | editor = Costa, André & Georges-Michel Fraichard |date=September 1979 | journal = Salon 1979: Toutes les Voitures du Monde | issue = 14 & 15 | page = 176 | publisher = l'Auto Journal | location = Paris | language = french }} 7. ^{{Cite book | title = World Cars 1980 | publisher = The Automobile Club of Italy/Herald Books | editor-last = Lösch | editor-first = Annamaria | location = Pelham, NY | page = 368 | year = 1980 | isbn = 0-910714-12-6 }} 8. ^1 {{citation | url = http://datsun1200.com/modules/myalbum/photo.php?lid=385 | title = Datsun RoadStar/SportStar Options | publisher = Nissan New Zealand | accessdate = 2011-02-13 }}
External links
See also
1 : Nissan engines |
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。