1. Linear stability analysis

2. Vorticity explanation

3. Late-time behaviour

4. Stages of development and eventual evolution into turbulent mixing

5. See also

6. Notes

7. References
    Original research papers  Other 

8. External links

The Rayleigh–Taylor instability, or RT instability (after Lord Rayleigh and G. I. Taylor), is an instability of an interface between two fluids of different densities which occurs when the lighter fluid is pushing the heavier fluid.^[1][2][3] Examples include the behavior of water suspended above oil in the gravity of Earth,^[2] mushroom clouds like those from volcanic eruptions and atmospheric nuclear explosions,^[4] supernova explosions in which expanding core gas is accelerated into denser shell gas,^[5][6] instabilities in plasma fusion reactors and ^[7] inertial confinement fusion.^[8]

Water suspended atop oil is an everyday example of Rayleigh–Taylor instability, and it may be modeled by two completely plane-parallel layers of immiscible fluid, the more dense on top of the less dense one and both subject to the Earth's gravity. The equilibrium here is unstable to any perturbations or disturbances of the interface: if a parcel of heavier fluid is displaced downward with an equal volume of lighter fluid displaced upwards, the potential energy of the configuration is lower than the initial state. Thus the disturbance will grow and lead to a further release of potential energy, as the more dense material moves down under the (effective) gravitational field, and the less dense material is further displaced upwards. This was the set-up as studied by Lord Rayleigh.^[2] The important insight by G. I. Taylor was his realisation that this situation is equivalent to the situation when the fluids are accelerated, with the less dense fluid accelerating into the more dense fluid.^[2] This occurs deep underwater on the surface of an expanding bubble and in a nuclear explosion.^[9]

As the RT instability develops, the initial perturbations progress from a linear growth phase into a non-linear growth phase, eventually developing "plumes" flowing upwards (in the gravitational buoyancy sense) and "spikes" falling downwards. In the linear phase, equations can be linearized and the amplitude of perturbations is growing exponentially with time. In the non-linear phase, perturbation amplitude is too large for the non-linear terms to be neglected. In general, the density disparity between the fluids determines the structure of the subsequent non-linear RT instability flows (assuming other variables such as surface tension and viscosity are negligible here). The difference in the fluid densities divided by their sum is defined as the Atwood number, A. For A close to 0, RT instability flows take the form of symmetric "fingers" of fluid; for A close to 1, the much lighter fluid "below" the heavier fluid takes the form of larger bubble-like plumes.^[1]

This process is evident not only in many terrestrial examples, from salt domes to weather inversions, but also in astrophysics and electrohydrodynamics. RT instability structure is also evident in the Crab Nebula, in which the expanding pulsar wind nebula powered by the Crab pulsar is sweeping up ejected material from the supernova explosion 1000 years ago.^[10] The RT instability has also recently been discovered in the Sun's outer atmosphere, or solar corona, when a relatively dense solar prominence overlies a less dense plasma bubble.^[11] This latter case is an clear example of the magnetically modulated RT instability.^[12][13]

Note that the RT instability is not to be confused with the Plateau–Rayleigh instability (also known as Rayleigh instability) of a liquid jet. This instability, sometimes called the hosepipe (or firehose) instability, occurs due to surface tension, which acts to break a cylindrical jet into a stream of droplets having the same total volume but higher surface area.

Many people have witnessed the RT instability by looking at a lava lamp, although some might claim this is more accurately described as an example of Rayleigh–Bénard convection due to the active heating of the fluid layer at the bottom of the lamp.

Linear stability analysis

The inviscid two-dimensional Rayleigh–Taylor (RT) instability provides an excellent springboard into the mathematical study of stability because of the simple nature of the base state.^[14] This is the equilibrium state that exists before any perturbation is added to the system, and is described by the mean velocity field where the gravitational field is An interface at separates the fluids of densities in the upper region, and in the lower region. In this section it is shown that when the heavy fluid sits on top, the growth of a small perturbation at the interface is exponential, and takes place at the rate^[2]

where is the temporal growth rate, is the spatial wavenumber and is the Atwood number.

The perturbation introduced to the system is described by a velocity field of infinitesimally small amplitude, Because the fluid is assumed incompressible, this velocity field has the streamfunction representation

where the subscripts indicate partial derivatives. Moreover, in an initially stationary incompressible fluid, there is no vorticity, and the fluid stays irrotational, hence . In the streamfunction representation, Next, because of the translational invariance of the system in the x-direction, it is possible to make the ansatz

where is a spatial wavenumber. Thus, the problem reduces to solving the equation

The domain of the problem is the following: the fluid with label 'L' lives in the region , while the fluid with the label 'G' lives in the upper half-plane . To specify the solution fully, it is necessary to fix conditions at the boundaries and interface. This determines the wave speed c, which in turn determines the stability properties of the system.

The first of these conditions is provided by details at the boundary. The perturbation velocities should satisfy a no-flux condition, so that fluid does not leak out at the boundaries Thus, on , and on . In terms of the streamfunction, this is

The other three conditions are provided by details at the interface .

Continuity of vertical velocity: At , the vertical velocities match, . Using the streamfunction representation, this gives

Expanding about gives

where H.O.T. means 'higher-order terms'. This equation is the required interfacial condition.

The free-surface condition: At the free surface , the kinematic condition holds:

Linearizing, this is simply

where the velocity is linearized on to the surface . Using the normal-mode and streamfunction representations, this condition is , the second interfacial condition.

Pressure relation across the interface: For the case with surface tension, the pressure difference over the interface at is given by the Young–Laplace equation:

where σ is the surface tension and κ is the curvature of the interface, which in a linear approximation is

Thus,

However, this condition refers to the total pressure (base+perturbed), thus

(As usual, The perturbed quantities can be linearized onto the surface z=0.) Using hydrostatic balance, in the form

this becomes

The perturbed pressures are evaluated in terms of streamfunctions, using the horizontal momentum equation of the linearised Euler equations for the perturbations,

{{pad|4em}} with

to yield

Putting this last equation and the jump condition on together,

Substituting the second interfacial condition and using the normal-mode representation, this relation becomes

where there is no need to label (only its derivatives) because

at

Solution

Now that the model of stratified flow has been set up, the solution is at hand. The streamfunction equation with the boundary conditions has the solution

The first interfacial condition states that at , which forces The third interfacial condition states that

Plugging the solution into this equation gives the relation

The A cancels from both sides and we are left with

To understand the implications of this result in full, it is helpful to consider the case of zero surface tension. Then,

and clearly

• If , and c is real. This happens when the

lighter fluid sits on top;

• If , and c is purely imaginary. This happens

when the heavier fluid sits on top.

Now, when the heavier fluid sits on top, , and

where is the Atwood number. By taking the positive solution, we see that the solution has the form

and this is associated to the interface position η by: Now define

The time evolution of the free interface elevation initially at is given by:

which grows exponentially in time. Here B is the amplitude of the initial perturbation, and denotes the real part of the complex valued expression between brackets.

In general, the condition for linear instability is that the imaginary part of the "wave speed" c is positive. Finally, restoring the surface tension makes c² less negative and is therefore stabilizing. Indeed, there is a range of short waves for which the surface tension stabilizes the system and prevents the instability forming.

When the two layers of the fluid are allowed to have a relative velocity, the instability is generalized to the Kelvin-Helmholtz-Rayleigh-Taylor instability, which includes both the Kelvin-Helmholtz instability and the Rayleigh-Taylor instability as special cases. It was recently discovered that the fluid equations governing the linear dynamics of the system admit a parity-time symmetry, and the Kelvin-Helmholtz-Rayleigh-Taylor instability occurs when and only when the parity-time symmetry breaks spontaneously.^[15]

Vorticity explanation

The RT instability can be seen as the result of baroclinic torque created by the misalignment of the pressure and density gradients at the perturbed interface, as described by the two-dimensional inviscid vorticity equation, , where ω is vorticity, ρ density and p is the pressure. In this case the dominant pressure gradient is hydrostatic, resulting from the acceleration.

When in the unstable configuration, for a particular harmonic component of the initial perturbation, the torque on the interface creates vorticity that will tend to increase the misalignment of the gradient vectors. This in turn creates additional vorticity, leading to further misalignment. This concept is depicted in the figure, where it is observed that the two counter-rotating vortices have velocity fields that sum at the peak and trough of the perturbed interface. In the stable configuration, the vorticity, and thus the induced velocity field, will be in a direction that decreases the misalignment and therefore stabilizes the system.^[16][17]

Late-time behaviour

The analysis in the previous section breaks down when the amplitude of the perturbation is large. The growth then becomes non-linear as the spikes and bubbles of the instability tangle and roll up into vortices. Then, as in the figure, numerical simulation of the full problem is required to describe the system.

Stages of development and eventual evolution into turbulent mixing

The evolution of the RTI follows four main stages.^[19] In the first stage, the perturbation amplitudes are small when compared to their wavelengths, the equations of motion can be linearized, resulting in exponential instability growth. In the early portion of this stage, a sinusoidal initial perturbation retains its sinusoidal shape. However, after the end of this first stage, when non-linear effects begin to appear, one observes the beginnings of the formation of the ubiquitous mushroom-shaped spikes (fluid structures of heavy fluid growing into light fluid) and bubbles (fluid structures of light fluid growing into heavy fluid). The growth of the mushroom structures continues in the second stage and can be modeled using buoyancy drag models, resulting in a growth rate that is approximately constant in time. At this point, nonlinear terms in the equations of motion can no longer be ignored. The spikes and bubbles then begin to interact with one another in the third stage. Bubble merging takes place, where the nonlinear interaction of mode coupling acts to combine smaller spikes and bubbles to produce larger ones. Also, bubble competition takes places, where spikes and bubbles of smaller wavelength that have become saturated are enveloped by larger ones that have not yet saturated. This eventually develops into a region of turbulent mixing,which is the fourth and final stage in the evolution. It is generally assumed that the mixing region that finally develops is self-similar and turbulent, provided that the Reynolds number is sufficiently large.^[20]

See also

• Richtmyer–Meshkov instability
• Kelvin–Helmholtz instability
• Mushroom cloud
• Plateau–Rayleigh instability
• Salt fingering
• Hydrodynamic stability
• Kármán vortex street
• Fluid thread breakup

Notes

References

Original research papers

• {{cite journal| author=Rayleigh, Lord (John William Strutt) | authorlink=John Strutt, 3rd Baron Rayleigh | title=Investigation of the character of the equilibrium of an incompressible heavy fluid of variable density | journal=Proceedings of the London Mathematical Society | volume=14 | pages=170–177 | date=1883 |doi=10.1112/plms/s1-14.1.170 }} (Original paper is available at: https://www.irphe.fr/~clanet/otherpaperfile/articles/Rayleigh/rayleigh1883.pdf .)
• {{cite journal| author=Taylor, Sir Geoffrey Ingram | authorlink=Geoffrey Ingram Taylor | title=The instability of liquid surfaces when accelerated in a direction perpendicular to their planes | journal=Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences | volume=201 | issue=1065 | pages=192–196 | date=1950 | doi=10.1098/rspa.1950.0052 |bibcode = 1950RSPSA.201..192T }}

Other

• {{cite book| author=Chandrasekhar, Subrahmanyan | authorlink=Subrahmanyan Chandrasekhar | title=Hydrodynamic and Hydromagnetic Stability | publisher=Dover Publications | date=1981 | isbn=978-0-486-64071-6 }}
• {{cite book| title=Introduction to hydrodynamic stability | first=P. G. | last=Drazin | authorlink=Philip Drazin | publisher=Cambridge University Press | date=2002 | isbn=978-0-521-00965-2 }} xvii+238 pages.
• {{cite book | author= Drazin, P. G. |author2=Reid, W. H. | title= Hydrodynamic stability | date=2004 | publisher=Cambridge University Press | location=Cambridge | isbn=978-0-521-52541-1 |edition=2nd }} 626 pages.

External links

• [https://web.archive.org/web/20050404031045/http://acg.media.mit.edu/people/fry/mixing/ Java demonstration of the RT instability in fluids]
• Actual images and videos of RT fingers
• Experiments on Rayleigh-Taylor instability at the University of Arizona
• plasma Rayleigh-Taylor instability experiment at California Institute of Technology

• Pinewood American International School
• Pinewood, Berkshire
• Pinewood Community School (Eagan, Minnesota)
• Pinewood Elementary School (Mascouche, Quebec)
• Pinewood Estate
• Pinewood Estates, Alberta
• Pinewood Group
• Pinewood, Hampshire
• Pinewood Indomina Studios
• Pinewood Iskandar Malaysia Studios
• Pinewood, Miami-Dade County, FL
• Pinewood, Miami-Dade County, Florida
• Pinewood Nematode
• Pinewoods Camp
• Pinewoods Estates, Alberta
• Pinewoods fritillary
• Pinewood Shepperton plc
• Pinewoods horkelia
• Pinewoods (Lightfoot, Virginia)
• Pine woods lily
• Pinewoods milkweed
• Pinewoods oxeye
• Pinewoods pussytoes
• Pine Woods Snake
• Pine woods treefrog