1. Formation

2. Examples

3. Anastomosing rivers

4. See also

5. References

6. Further reading

7. External links

A braided river, or braided channel, consists of a network of river channels separated by small, often temporary, islands called braid bars or, in British usage, aits or eyots. Braided streams occur in rivers with low speed, low slope (but not very low slope), and/or large sediment load.^[1] Braided channels are also typical of environments that dramatically decrease channel depth, and consequently channel velocity, such as river deltas, alluvial fans, and peneplains.

Formation

Braided rivers, as distinct from meandering rivers, occur when a threshold level of sediment load or slope is reached while a steep gradient is also maintained. Geologically speaking, an increase in sediment load over time will increase the slope of the river, so these two conditions may be considered synonymous; and, consequently, a variation of slope can model a variation in sediment load. A threshold slope was experimentally determined to be 0.016 (ft/ft) for a {{convert|0.15|cuft/s|m3/s|abbr=on}} stream with poorly sorted coarse sand.^[1] Any slope over this threshold created a braided stream, while any slope under the threshold created a meandering stream or – for very low slopes – a straight channel. So the main controlling factor on river development is the amount of sediment that the river carries; once a given system crosses a threshold value for sediment load, it will convert from a meandering system to a braided system. Also important to channel development is the proportion of suspended load sediment to bed load. An increase in suspended sediment allowed for the deposition of fine erosion-resistant material on the inside of a curve, which accentuated the curve and in some instances, caused a river to shift from a braided to a meandering profile.^[1]

The channels and braid bars are usually highly mobile, with the river layout often changing significantly during flood events.^[2] Channels move sideways via differential velocity: On the outside of a curve, deeper, swift water picks up sediment (usually gravel or larger stones), which is re-deposited in slow-moving water on the inside of a bend.

The braided channels may flow within an area defined by relatively stable banks or may occupy an entire valley floor. The Rakaia River in Canterbury, New Zealand has cut a channel 100 metres wide into the surrounding plains; this river transports sediment to a lagoon located on the river-coast interface.

Conditions associated with braided channel formation include:

• an abundant supply of sediment^[3]
• high stream gradient^[4]
• rapid and frequent variations in water discharge^[4]
• erodible banks
• a steep channel gradient

However, the critical factor that determines whether a stream will meander or braid is bank erodibility. A stream with cohesive banks that are resistant to erosion will form narrow, deep, meandering channels, whereas a stream with highly erodible banks will form wide, shallow channels, sustaining helical flow and resulting in the formation of braided channels.^[5]

Examples

Extensive braided river systems are found in Alaska, Canada, New Zealand's South Island, and the Himalayas, which all contain young, rapidly eroding mountains.

• The enormous Brahmaputra-Jamuna River in Asia is a classic example of a braided river.^[6]
• Braided river systems are present in Africa, for example in the Touat Valley.
• A notable example of a large braided stream in the contiguous United States is the Platte River in central and western Nebraska. The sediment of the arid Great Plains is augmented by the presence of the nearby Sandhills region north of the river.
• A portion of the lower Yellow River takes a braided form.^[7]
• The Sewanee Conglomerate, a Pennsylvanian coarse sandstone and conglomerate unit^[8] present on the Cumberland Plateau near the University of the South, may have been deposited by an ancient braided and meandering river that once existed in the eastern United States.^[9] Others have interpreted the depositional environment for this unit as a tidal delta.^[10]

Notable braided rivers in Europe:

• Italy
  • Tagliamento
  • Piave (river)
  • Brenta (river)
  • Cellina
  • Meduna
  • Fella
  • Magra
• Poland and Belarus
  • Narew

Anastomosing rivers

Anastomosing rivers or streams are similar to braided rivers in that they consist of multiple interweaving channels. However, anastomosing rivers typically consist of a network of low-gradient, narrow, deep channels with stable banks,^[5] in contrast to braided rivers, which form on steeper gradients and display less bank stability.

See also

• {{annotated link|Ait}}
• {{annotated link|Anabranch}}
• {{annotated link|Lagoon}}
• {{annotated link|Shoal}}

References

Further reading

• {{Cite book |editor-last=Hibbert |editor-first=Barry |editor2-last=Brown |editor2-first=Kerry |date=2001 |title=Braided River Field Guide |location=Christchurch, N.Z. |publisher=Deptartment of Conservation |isbn=9780478221213}}

External links

• {{Commons category-inline|Braided rivers}}

• Calophyllum bracteatum
• Calophyllum brasiliense
• Calophyllum brasiliensis
• Calophyllum brassii
• Calophyllum caudatum
• Calophyllum chapelieri
• Calophyllum collinum
• Calophyllum confusum
• Calophyllum cordato-oblongum
• Calophyllum cuneifolium
• Calophyllum euryphyllum
• Calophyllum goniocarpum
• Calophyllum havilandii
• Calophyllum heterophyllum
• Calophyllum hirasimum
• Calophyllum insularum
• Calophyllum laticostatum
• Calophyllum macrophyllum
• Calophyllum mooni
• Calophyllum morobense
• Calophyllum neoebudicum
• Calophyllum novoguineense
• Calophyllum nubicola
• Calophyllum obscurum
• Calophyllum papuanum