| 词条 | Bridge circuit |
| 释义 |
A bridge circuit is a topology of electrical circuitry in which two circuit branches (usually in parallel with each other) are "bridged" by a third branch connected between the first two branches at some intermediate point along them. The bridge was originally developed for laboratory measurement purposes and one of the intermediate bridging points is often adjustable when so used. Bridge circuits now find many applications, both linear and non-linear, including in instrumentation, filtering and power conversion.[1][2] The best-known bridge circuit, the Wheatstone bridge, was invented by Samuel Hunter Christie and popularized by Charles Wheatstone, and is used for measuring resistance. It is constructed from four resistors, two of known values R1 and R3 (see diagram), one whose resistance is to be determined Rx, and one which is variable and calibrated R2. Two opposite vertices are connected to a source of electric current, such as a battery, and a galvanometer is connected across the other two vertices. The variable resistor is adjusted until the galvanometer reads zero. It is then known that the ratio between the variable resistor and its neighbour R1 is equal to the ratio between the unknown resistor and its neighbour R3, which enables the value of the unknown resistor to be calculated. The Wheatstone bridge has also been generalised to measure impedance in AC circuits, and to measure resistance, inductance, capacitance, and dissipation factor separately. Variants are known as the Wien bridge, Maxwell bridge, and Heaviside bridge (used to measure the effect of mutual inductance). [3] All are based on the same principle, which is to compare the output of two potential dividers sharing a common source. In power supply design, a bridge circuit or bridge rectifier is an arrangement of diodes or similar devices used to rectify an electric current, i.e. to convert it from an unknown or alternating polarity to a direct current of known polarity. In some motor controllers, an H-bridge is used to control the direction the motor turns. See also
Gallery{{gallery|lines=4 |Image:Wheatstonebridge.svg|Wheatstone bridge |Image:Mostek Wiena.svg| Wien bridge |Image:Maxwell_bridge.svg| Maxwell bridge |Image:H_bridge.svg| H bridge |Image:Fontanabridge.png| Fontana bridge |Image:Diode_bridge_alt_1.svg| Full wave rectifier |Image:KelvinBridge.gif| Kelvin bridge |Image:Lattice_filter%2C_general.svg| Lattice bridge |Image:Zobel_%283%29_Bridge_T.svg| Bridged T circuit |Image:Carey Foster bridge.svg| Carey Foster bridge }} References1. ^Bureau of Naval Personnel, Basic Electricity, p.114, Courier Dover Publications, 1970 {{ISBN|0-486-20973-3}}. 2. ^Clarence W. De Silva, Vibration monitoring, testing, and instrumentation, pp.2.43-2.49, CRC Press, 2007 {{ISBN|1-4200-5319-1}} 3. ^All about circuits: AC bridge circuits External links
1 : Bridge circuits |
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。