“Insertion loss”的意思、由来-开放百科全书

词条

Insertion loss

释义

Electronic filters
Link with scattering parameters
See also
References

{{short description|loss of signal transmission power when devices are connected to a transmission line}}{{Use American English|date = March 2019}}

In telecommunications, insertion loss is the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).

If the power transmitted to the load before insertion is P_T and the power received by the load after insertion is P_R, then the insertion loss in dB is given by,

Electronic filters

Insertion loss is a figure of merit for an electronic filter and this data is generally specified with a filter. Insertion loss is defined as a ratio of the signal level in a test configuration without the filter installed (|V₁|) to the signal level with the filter installed (|V₂|). This ratio is described in dB by the following equation:

For passive filters, |V₂| will be smaller than |V₁|. In this case, the insertion loss is positive and measures how much smaller the signal is after adding the filter.

Link with scattering parameters

In case the two measurement ports use the same reference impedance, the insertion loss () is defined as:^[1]^[2]

.

Here is one of the scattering parameters. Insertion loss is the extra loss produced by the introduction of the DUT between the 2 reference planes of the measurement. The extra loss can be introduced by intrinsic loss in the DUT and/or mismatch. In case of extra loss the insertion loss is defined to be positive.

References

1. ^Pozar, David M.; Microwave Engineering, Third Edition
2. ^Collin, Robert E.; Foundations For Microwave Engineering, Second Edition

*{{FS1037C}}

1 : Telecommunications engineering

随便看

开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。

Electronic filters

Link with scattering parameters

See also

References