| 词条 | Busy signal |
| 释义 |
|filename=NorthAmericanBusySignal.ogg |title=Example of a North American busy signal |description=Listen to a busy signal from North America. |filename2=Old North American busy signal.ogg |title2=Example of an old North American busy signal |description2=Listen to a busy signal from North America used prior to 1980. |filename3=United_KingdomAustraliaBusySignal.ogg |title3=Example of a United Kingdom busy signal |description3=Listen to a busy signal from the United Kingdom.}} A busy signal (or busy tone or engaged tone) in telephony is an audible or visual signal to the calling party that indicates failure to complete the requested connection of that particular telephone call. The busy signal has become less common in the past decade due to the prevalence of call waiting and voicemail. Reasons for a busy signalAn otherwise unspecified busy signal indicates that the called number is occupied:
The standard busy signal sometimes occurs (sometimes with an intercept message played over the busy) at the end of a call to indicate the other party has hung up (see Disconnect tone), but mostly the off-hook tone is used. In some phone companies in the United Kingdom, the busy signal is played after the dial tone to indicate the caller has used up their allocated time to dial a number and must hang up, before the off-hook tone is played. The Beep-Beep Line or Jam LineBack in the early 1960s through the early 1980s, a telephone busy signal provided an early form of Social Media in many cities and towns of the United States called the "Jam Line[1]" or "Beep Line.[2]" Due to a flaw in the telephone switching equipment teenagers discovered they could talk to each other over the busy signal often exchanging phone numbers mostly for the purpose of dating. Common phone numbers for this to form on were popular radio station request lines, where teens would be calling in en mass to try and win concert tickets or request their favorite songs thus "jamming the lines" and generating a perpetual busy signal. Reorder toneA reorder tone, sometimes called a fast busy signal, indicates that no transmission path to the called number is available. This can occur either because the Inter-LATA trunk is busy at the time of the call- in which case this clears in a few seconds, if one redials- or the number is temporarily out of service, due to maintenance or the number is not willing to accept calls. It is otherwise played after a recorded announcement explaining the reason for a general call failure. StylesCountries have different signaling tones that act as busy signals, in most cases consisting of a tone with equal on/off periods at a rate of between 60 and 120 interruptions per minute (i.p.m.). In North America, the Precise Tone Plan used today employs two tones of 480 and 620 Hz at 60 i.p.m. (i.e. on for 0.5 s, off for 0.5 s). In the past, before the adoption of the PreciseTone system, busy signal was generally composed of the same tone as dial tone in the central office in question, interrupted at the same rate. In the United Kingdom, busy tone consists of a single 400 Hz tone with equal 0.375 s on/off periods. This tone was adopted in the mid to late 1960s and replaced the older busy tone, which was the same 400 Hz signal but at half the interruption rate (i.e. 0.75 s on, 0.75 s off). See also
References1. ^{{cite web|url=https://www.mprnews.org/story/2012/12/24/arts/jam-line/|title=Jam Line: Remembering a Twin Cities teen phenomenon|first=Sasha|last=Aslanian|publisher=}} 2. ^{{cite web|url=http://www.vintagerotaryphones.com/the-beep-beep-line-the-jam-line-busy-signal-chats/|title=The Beep-Beep Line- The Jam Line – Busy Signal Chats - Vintage Rotary Phones|first=David W.|last=Zemens|website=www.vintagerotaryphones.com}} External links
1 : Telephony signals |
| 随便看 |
|
开放百科全书收录14589846条英语、德语、日语等多语种百科知识，基本涵盖了大多数领域的百科知识，是一部内容自由、开放的电子版国际百科全书。